• 제목/요약/키워드: Diesel removal

검색결과 162건 처리시간 0.028초

도상자갈 표면 유류 오염물질의 물리적 제거방안 연구 (Physical remediation of ballast gravels contaminated by oil pollutants)

  • 조영민;이재영;정우성;박덕신;강해숙;김희만;임종일
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.1386-1391
    • /
    • 2007
  • The ballast gravels are often contaminated by various pollutants, like diesel fuel, lubricants, and heavy metals. Especially, the gravels near the switching are apt to be polluted by the lubricant. Because this lubricant can pollute the soil of track, the contaminated ballast gravels should be cleaned immediately. In this study, a physical desorption method was used to remove the oil contaminants from the surface of the ballast gravels. Thermosetting resin was used as a media for physical remediation of ballast gravels. The total petroleum hydrocarbon of the gravels was monitored over time. In addition, scanning electron microscopic images were obtained to observe the removal of the oily pollutants from the surface of the gravels.

  • PDF

선박용 SCR 시스템의 촉매반응기 내부 유동특성에 관한 수치해석 (A Numerical Analysis on the Flow Characteristics inner Catalytic Reactor for Marine SCR System)

  • 이중섭;서정세;윤지훈;임병주;박창대;정경열
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
    • /
    • pp.125-126
    • /
    • 2012
  • The key issues for the reduction technologies of the exhaust gas from diesel engine being developed are to reduce particulate matters and NOx. Performance of NOx removal in SCR process depends on such various factors as catalyst factors(catalyst composition, shape, velocity, etc.), exhaust gas temperature and velocity distribution. In this study checked flow uniformity with the flow characteristics in the SCR reactor by using STAR CCM+. The pressure drop of experiment and simulation had similar result more than 90% at catalytic Cell. Also, flow uniformity calculated about 0.9036 ant 1st catalytic ind SCR reactor.

  • PDF

Air Pollution Protection onboard by Seawater and Electrolyte

  • An Suk-Heon
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제30권1호
    • /
    • pp.93-101
    • /
    • 2006
  • This research makes a new attempt to apply the activated seawater by electrolysis in the development of two-stage wet scrubber system to control the exhaust gas of large marine diesel engines. First, with using only seawater that is naturally alkaline (pH typically around 8.1). the $SO_2\;and\;SO_3$ are absorbed by relatively high solubility compared to other components of exhaust pollutants, and PM (Particulate Matter) is removed through direct contact with sprayed seawater droplets. Besides, the electrolyzed alkaline seawater by electrolysis, which contains mainly NaOH together with alkali metal ions $(i.e.\;Na^+,\;Mg^{2+},\;Ca^{2+})$, is used as the absorption medium of NOx and $CO_2$. Especially, to increase NOx absorption rate into the alkaline seawater. nitric oxide (NO) is adequately oxidized to nitrogen dioxide $(NO_2)$ in the acidic seawater, which means both volume fractions are adjusted to identical proportion. The results found that the strong acidic seawater was a valid oxidizer from NO to $NO_2$ and the strong alkaline seawater was effective in $CO_2$ absorption In the scrubber test, the SOx reduction of nearly $100\%$ could be achieved and also led to a sufficientPM reduction. Hence, the author believes that applying seawater and its electrolyte would bring the marine air pollution control system to an economical measure. Additionally it is well known that NOx and SOx concentration has a considerable influence on the $N_2O$ emission of green house gas. Although the $N_2O$ concentration exhausted from diesel engines is not as high, the green house gas effect is around 300 times greater than an equivalent volume of $CO_2$. Therefore, we investigated the $N_2O$ removal efficiency with using the electrolyzed seawater too. Finally this research would also plan to treat the effluent by applying electro-dialysis and electro-flotation technique s in the future.

Ti-grafted SBA-15 촉매를 이용한 경유유분 중의 황화합물의 선택산화탈황 특성 (Characteristics of Oxidative Desulfurization(ODS) of Sulfur Compounds in Diesel Fuel over Ti-grafted SBA-15 Catalyst)

  • 조진수;정광은;채호정;김철웅;정순용;오성근
    • Korean Chemical Engineering Research
    • /
    • 제46권5호
    • /
    • pp.845-851
    • /
    • 2008
  • 티타늄이 그라프팅(grafting)된 SBA-15 촉매(Ti-grafted SBA-15)상에서 TBHP(tert-butylhydroperoxide)를 산화제로 사용하여 회분식 반응기에서 모델 황화합물 및 실제 디젤 유분(LCO; Light Cylcle Oil)의 선택산화탈황(ODS; Oxidative Desulfurization) 반응을 수행하였으며, 티타늄 함량, 산화제/황의 몰비, 반응온도의 효과 및 반응속도상수와 활성화 에너지를 조사하였다. 티타늄이 5 wt% 도입된 Ti-grafted SBA-15 촉매는 난분해성 황화합물인 디벤조티오펜(DBT; Dibenzothiophene)과 4, 6-디메틸디벤조티오펜(4, 6-Dimethyldibenzothiophene)의 설폰(sulfone) 화합물로의 산화반응 시 표준반응조건(TBHP/S=2.5, $80^{\circ}C$, 1 atm)에서 반응개시 후 20분 뒤 100% 전환되는 우수한 활성을 나타내었다. 실제 디젤유분인 LCO를 원료로 성능 시험을 한 결과 활성이 우수하게 나타났으며 Ti-grafted SBA-15 촉매는 LCO에 함유 되어 있는 난분해성 황화합물의 선택적 산화탈황촉매로써 응용 가능성을 보였다.

DME 직접 합성공정 기술개발 (Development of Direct DME Synthesis Process)

  • 모용기;조원준;백영순
    • 한국가스학회지
    • /
    • 제14권3호
    • /
    • pp.41-45
    • /
    • 2010
  • DME(Dimethyl Ether)는 물리적 성질이 LPG와 유사하여 청정하면서 LPG와 잘 섞이고, 세탄가가 디젤연료와 유사하여 디젤을 대체할 수 있는 환경 친화적인 차세대 대체에너지이다. DME는 천연가스, CBM, biomass 등 다양한 원료로부터 제조할 수 있으며 탄소-탄소 직접결합이 없어 연소시 배기가스중에 검댕이나 황산화물이 없다. 한국가스공사에서 개발한 DME 공정은 크게 4개의 section으로 구분할 수 있다. 먼저 합성가스를 제조하는 syngas section 에서는 다양한 합성가스 비율을 제조할 수 있다. 이것은 tri-reforming을 완성하는 과정에서 합성가스 비율을 약 4.0~1.0의 범위로 조절할 수 있다. 두 번째로 $CO_2$ removal section에서 제거되는 $CO_2$는 약 92~99%로서 DME 합성반응기로 유입되는 $CO_2$의 최대 농도는 8%를 넘지 않아야 한다. 세 번째로 DME synthesis section에서 DME 합성 반응기의 반응온도는 높을수록 활성이 좋지만 촉매의 장기 활성을 위해서는 적정한 온도를 유지하는 것이 바람직하다. 마지막으로 DME purification section에서는 99.5%이상의 고순도의 DME를 정제할 수 있다.

계면활성제를 이용한 원위치 토양세정 기법 적용을 위한 기초 특성 연구 (A Study on the Basic Characteristics of In-situ Soil Flushing Using Surfactant)

  • 최상일;소정현;조장환
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제7권4호
    • /
    • pp.87-91
    • /
    • 2002
  • 유류로 오염된 부지에 토양세정기법을 적용하기 위하여 실험실 규모의 컬럼실험을 통하여 pilot규모 현장 적용을 위한 설계인자 및 최적 운전조건을 규명하고자 적정 세척제 종류와 농도, 배합비 및 세정용액 주입유량을 고찰하였다. 회분식실험 결과 $POE_{14}$와 SDS(1:1)를 1%로 적용한 혼합계면활성제의 효율이 가장 우수하였다. 그러나 예비실험 결과, 음이온계 계면활성제인 SDS는 생분해능 저해 경향이 다소 있는 것으로 나타나 같은 농도에서 효율이 거의 유사하며, 생분해능이 우수한 $POE_{5}$$POE_{14}$ 혼합계면활성제를 이용하여 실험하였다. 선정된 혼합계면활성제를 적용하여 디젤 오염토양 세척능력에 대하여 검토한 결과 세척제 농도 l%까지는 효율이 증가하다가 1% 이상의 농도에서는 다시 감소하는 경향을 나타내었다. 또한, 계면활성제 배합비를 1:1로 혼합하였을 경우 세척효율이 가장 우수하였다. 따라서 $POE_{5}$$POE_{14}$(1:1) l% 혼합계면활성제를 세척제로 선정하였다. 컬럼실험 결과, 주입 flux가 클수록 세정 제거된 총 유류의 양이 증가하였으며, 같은 pore velum히 세정용액 통과 시에는 flux가 작을수록 제거효율이 우수하였다.

디젤과 등유로 오염된 토양의 철광석으로 촉매화된 과수를 이용한 처리에 관한 연구 (A Study on Treatment of Soils Contaminated by Diesel and Kerosene Using Hydrogen Peroxide Catalyzed by Naturally Occurring Iron Minerals)

  • 최진호;김상대;문세기;공성호
    • 공업화학
    • /
    • 제10권1호
    • /
    • pp.24-29
    • /
    • 1999
  • 천연 토양 속에 많이 존재하는 철광석인 goethite, magnetite와 과산화수소수를 이용해 펜톤 유사 반응(Fenton-like oxidation)을 유도하여 디젤과 등유가 같은 중량 비율로 오염된 silica sand를 회분식 시스템으로 처리하여 보았다. 과산화수소수의 pH(3, 7) 농도(0%, 1%, 7%, 15%, 35%), 초기 오염물의 농도(0.2, 0.5, 1.0 g-오염물/kg-모래), 그리고 철광석(iron minerals)의 양(0, 1, 5 wt % magnetite 또는 goethite)을 달리하여 반응조건들을 조사하였다. Silica sand-철광석-$H_2O_2$ system에서의 오염물의 분해는 잔존 Total Petroleum Hydrocarbon(TPH)의 농도를 분석하여 확인하였다. 최적 실험 pH는 3이었고, 철광석이 철공급원으로 사용된 경우가 $FeSO_4$ 용액이 철공급원으로 사용된 경우보다 과수의 소모가 적어서 더 효율적이었다. 초기 오염물의 농도 1.0 g-오염물/kg-모래(5 wt % magnetite)에 과산화수소수의 농도를 0%, 1%, 7%, 15%, 그리고 35%로 달리하여 본 결과 8일후 각각 0%, 24.5%, 44%, 50%, 그리고 70%의 TPH 감소를 보였다. 같은 오염물 농도하에서 15%의 과산화수소를 사용하고, 철광석의 양이 0, 1, 5, 10 wt %로 변화되었을 경우, 오염물의 제거량은 magnetite의 사용시 각각 0%, 33.5%, 50%, 60%, goethite의 사용시는 각각 0%, 29%, 41%, 53%이었다. Magnetite system은 iron(II)과 iron(III)이 공존하며, 미량의 철성분이 용해되므로 goethite system보다 오염물의 분해가 더 많이 일어나는 것으로 보인다. 그러나 용해된 철성분은 철광석 표면에 침전물의 형태로 쌓이게 되어 철광석 표면의 전자교환능력을 감소시키고 과산화수소수를 quenching시키는 것으로 사려된다. 그리하여 goethite system에서 과산화수소수가 적게 소모되어 magnetite system보다 나은 처리효율을 가지는 것으로 나타났다. 토양을 shaker를 이용하여 혼합시킨 결과 오염물의 제거량이 magnetite의 경우 41%, goethite의 경우 30%만큼 증가하였다. 이 연구의 결과를 통하여 볼 때 천연토양속에는 magnetite와 goethite같은 철광석이 함유되어 있으므로 별도의 철성분 첨가없이 과산화수소수의 처리만으로도 석유로 오염된 토양의 in-situ 또는 ex-situ한 처리가 가능할 것으로 보인다.

  • PDF

Enhanced Bioslurping system을 이용한 유류오염 토양의 복원 (Enhanced Bioslurping System for Remediation of Petroleum Contaminated Soils)

  • 김대은;서승원;김민경;공성호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권2호
    • /
    • pp.35-43
    • /
    • 2005
  • 토양의 유류오염복원에 가장 널리 사용되어지는 Bioslurping system은 Pump and Treatment (P&T), Soil Vapor Extraction (SVE), 그리고 Bioventing (BV) 공정을 복합한 지중(in-situ) 복원기술이라 할 수 있다 그러나 Bioslurping system은 비휘발성 유기물질, 난분해성 유기물질을 처리에 어려움을 가지고 있어 이를 보완할 수 있는 Modified Fenton 반응을 이용한 Hybrid process system의 동시처리 가능성을 실험하였다. 디젤로 오염된 사질토양복 원에 있어서 SVE 공정에 의한 복원과정에서 디젤 제거율이 진공압에 비례하여 증가하였으나 토양에 강하게 흡착된 디젤 성분중의 비휘발성 물질처리에는 한계가 있음을 나타내었다. 또한 지표면과 지하에서 제거 효율의 차이를 나타냄으로서 지표면 또는 추출정과 거리가 멀어질수록 SVE 공정의 효율이 감소하는 것을 확인하였으며 이는 원통형반 응기에서 공기의 흐름이 반구형태로 유도되는 것에 기인한다고 판단된다. Modified Fenton 반응과의 생물학적 화학적 Co-oxidation을 이용한 디젤의 처리의 경우에는 Modified Fenton 반응의 효율이 낮게 나타나 0.1% (wt) 과산화수소가 존재함에 있어서도 92.8%의 높은 디젤분해능을 나타냄으로서 과산화수소가 유류분해 미생물에 산소원으로 사용될 수 있는 것은 확인하였으나 Co-oxidation의 가능성이 현저하게 떨어지는 것으로 보인다. Modified Fenton 반응에서 철 착체물로서 NTA를 사용했을 때가 EDTA를 사용했을 때보다 더 높은 효율을 갖는 것과 괴산화수소의 농도가 높아지면서 Modified Fenton 반응의 효율도 증가하는 것을 확인하였다. 대표적인 방향족, 지방족 화합물 (aromatic, aliphatic compound)인 toluene, hexadecane을 오염원으로 한 Modified Fenton 반응에서 상대적으로 지방 족 화합물의 상대적 안정성으로 인하여 그 효율이 방향족 화합물에 비해 크게 감소하는 것으로 나타났다. 또한 디젤을 오염물로 사용하였을 경우, 최소 10% 이상의 과산화수소에서 그 효율을 나타내어 Bioslurping system에 의한 처리 후 토양에 잔존하는 디젤의 Modified Fenton 반응 공정을 이용한 복원기술의 복합화 가능성을 확인하였다.

노후 특수·화물 차량 PM/NOx 저감을 위한 SDPF 촉매 및 코팅 기술 연구 (A Study on Selective Catalytic Reduction on Diesel Particulate Filter Catalyst and Coating Technology the Removal of Particulate Matters and NOx for Old Special Cargo Vehicles)

  • 정관형;서필원;오형석;김종국;강소연;강정호;김현준;신병선
    • 공업화학
    • /
    • 제32권6호
    • /
    • pp.695-699
    • /
    • 2021
  • 본 연구에서는, 노후된 엔진을 사용하는 트럭 및 특수차량에서 배출되는 NOx 및 PM을 동시에 제거하기 위해 SDPF 후처리 시스템 연구를 수행하였다. 우선, SDPF의 SCR 촉매를 선정하기 위해서, V/TiO2와 Cu-zeolite 촉매의 de-NOx 성능을 비교하였으며, SCR 촉매특성분석은 BET, XRD 및 NH3-TPD를 통해 분석하였다. 촉매 활성시험 결과, Cu-zeolite 촉매가 가장 우수한 내열성을 보여주었다. 최적의 SDPF 코팅을 위해서, 목표로 설정된 입자 크기에 맞추어 슬러리를 제조하였다. SCR 코팅량에 따른 SDPF의 코팅안정성과 배압 결과, SDPF 촉매를 로딩량별로 A, B, C 샘플을 제작하여 코팅안정성과 배압 및 de-NOx 성능을 비교한 결과 B 샘플에서에서 가장 우수한 결과를 보였다. 최적 SDPF 후처리시스템에 대해 엔진동력계 시험을 실시하였으며, 시험결과 Eu-5 규제를 만족하였다.

차량 운전자의 공기오염물질 잠재적 노출 및 차량용 공기청정기에 의한 제어 (Potential Exposure to Air Pollutants for Driver and Its Control Using Commercial Air Cleaning Device Inside Vehicle)

  • 김대원;김문현;양원호
    • 한국환경보건학회지
    • /
    • 제30권5호
    • /
    • pp.481-486
    • /
    • 2004
  • Vehicle occupant exposure to air pollutants has been a subject of concern in recent years because of higher levels of air pollutants inside gasoline or diesel-using vehicle, comparing to the surrounding atmosphere. Contrary to previous studies, fuel of vehicles operated in this study was liquefied petroleum gas (LPG). This study examined the potential exposure and removal efficiency of selected volatile organic compounds (VOCs), nitrogen dioxide ($NO_2$) and respirable suspended particle (RSP) by commercial air cleaning device inside vehicle under different ventilation conditions. Vehicle concentrations inside of benzene, toluene, m,p-xylene, $NO_2$ and RSP were lower under the low ventilation condition. This was indicated that outdoor air pollutants could affect the vehicle air quality inside in case metropolitan cities such as Daegu. The urban vehicle concentrations inside of benzene, toluene, m,p-xylene, $NO_2$ and RSP with air cleaning device were higher than those without air cleaning device. This means that the use of air cleaning device equipped with activated carbon filter, which was used in this study, in the interior of vehicles could be expected to reduce the vehicle occupants exposure to air pollutants effectively. In batch type reactor of laboratory scale, removal efficiencies of air cleaning device used were $97.0\%,\;95.7\%,\;94.6\%\;and\;85.5\%$ respectively in benzene, toluene, m,p-xylene and $NO_2$.