• 한국전기전자재료학회논문지
• /
• 제18권5호
• /
• pp.457-463
• /
• 2005

This paper presents a method for analyzing irregular shaped power distribution networks. The irregular shaped metal-dielectric-metal plane is split into several piece of rectangular segments to calculate the impedance of the irregular shaped plane. Impedance matrix for each rectangular segments is calculated using the Mobius transform method to reduce the calculation time. Then the segmentation and do-segmentation method is applied to the piece of rectangular segments. Applied to the 6 inch by 5 inch size irregular shaped board, the proposed method shows 10 times faster than the electromagnetic or circuit analysis method.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.261-264
• /
• 2009

We present a three-dimensional (3D) particle focusing channel using the positive dielectrophoresis (pDEP) guided by a dielectric structure between two planar electrodes. The dielectric structure between two planar electrodes induces the maximum electric field at the center of the microchannel, and particles are focused to the center of the microchannel by pDEP as they flow from the single sample injection port. Compared to the previous 3D particle focusing methods, the present device achieves the simple and effective particle focusing function without any additional fluidic ports and top electrodes. In the experimental study, approximately 90 % focusing efficiency were achieved within the focusing length of 2mm, on both x-z plane (top-view) and y-z plane (side-view) for $2{\mu}m$-diameter polystyrene (PS) bead at the applied voltage over 15 Vp-p (square wave) and at the flow rate below 0.01 ${\mu}l$/min. The present 3D particle focusing channel results in a simple particle focusing method suitable for use in integrated microbiochemical analysis system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1598-1600
• /
• 1998

When dielectric surface electric field exceed any electric field strength on air, corona discharge is occurred from the dielectric surface. This paper presents corona discharge phenomena on the dielectric in high field were studied under application of ${\pm}DC$ voltage, constitute of the point to plane 20mm gap. The results obtained in experimental are summarized as follow :(1) Corona pulse is appeared periodically after first corona pulse is occurred and the number of corona pulse increases with the instantaneous applied voltage but peak value is not changed greatly.(2)Applied voltage to beccrite and characteristics and peak value of current are almost a straight line. That kind of tendency accorded with characteristics of beccrite resistance.(3)In case of Positive corona, Positive streamers, were progressed greatly to plane electrodes but In case of negative corona, negative streamers smaller than that of Positive corona.

• 한국전자파학회논문지
• /
• 제12권3호
• /
• pp.425-431
• /
• 2001

비유전율 ${\epsilon}_{r}$=36인 유전체를 이용한 무선 LAN용 개구 결합 마이크로스트립 원통형 유전체 공진 안테나(DRA)를 설계하고 제작하였다. 우선 급전 소자는 마이크로스트립 전송선로 이론을 이용하여 급전 선로 길이, 선로 폭, 슬롯 길이, 슬롯 폿과 스터브 길이을 계산하였다. 방사 소자는 원통형 유전체 cavity 이론을 이용하여 설계하였다. 제작된 원통형 DRA의 공진주파수는 2.449 GHz이고 VSWR, 반사 손실과 대역폭은 각각 1.009, -47dB 와 70MHz이다. 방사 패턴의 전후방비는 13dB이고 E면과 H 면의 3dB 빔폭은 각각 1$10^{\circ}$과 90$^{\circ}$이다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.306-310
• /
• 2002

본 논문에서는 기존의 혼 안테나에 Dielectric rod를 삽입하는 구조를 사용하였다. 입력구조는 Rectangular Waveguide Feed에 Cone을 접목시키는 형태로 구현되었으며 기존의 E-Plane taper구조보다 특성이 양호하며 소형화를 구현해냈다. 제작된 안테나의 중심주파수는 37GHz이며 정재파비 특성 또한 양호하다. 여러 Feeding 구조 중 Bandwidth를 좀더 확장할 수 있는 구조에 초점을 맞추어 대역폭은 13%이상을 구현했으며 시뮬레이션 툴은 Ansoft HFSS V7.0으로 최적화한 후 제작 및 측정하였다. 또한 사용된 Dielectric rod의 제질은 Teflon(ETFE, $\varepsilon$$_{r}$=2.03)을 사용하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.211-214
• /
• 1999

Periodical surfaces with the sawtooth profile are studied on their backscattering by the TE plane wave incident. The backscattering is calculated by the mode-matching method. The surfaces are perfect conductor and are covered with dielectric materials to make a flat surface. It is observed that a cover filled with multiple dielectric layers can be used to reduce the backscattering at an arbitrary incident angle.

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.8-14
• /
• 1992

The radiation pattern of a rectangular-grid array antenna consisted of rectangular waveguides is represented by multiplication of its element and array factors. Calculated radiation patterns for excitation of TES110T mode inside the waveguides suffer from the blindness at a particular direction on E-plane. Numerical simulations show that the blindness can be removed by inserting dielectric plug inside the waveguides or covering dielectric sheath in front of the waveguides.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권6호
• /
• pp.251-254
• /
• 2005

Animpedancecalculationmethodfortheirregularshapedpowerdistributionnetworksispresented.Theirregularshapedmetal-dielectric-metalboardissplitintothreepieceofsegmentstocalculatetheimpedancebetweenthetwoseparatedpointsontheboard.Transmission-matrixdescriptioncorrespondingtotheunitcolumnofboardandtheconnectionofunitcolumnboardareintroduced.Thenthetransmission-matrixfortheeachsegmentiscalculatedandreducedtothe2-portsimpedancematrix.Theproposedalgorithmisveryfastcomparingtheexistingmethods.Appliedtothe6inchby5inchsizeirregularshapedboard,theproposedmethodshows15timesfasterthantheelectromagneticorcircuitanalysismethod.

• 전자공학회논문지A
• /
• 제29A권11호
• /
• pp.57-61
• /
• 1992

In this paper, the shielding characteristics of a cylindrical multilayered dielectric are analyzed. In order to evaluate shielding effects, we consider the case that plane waves are incident upon an infinitely long cylindrical multilayered dielectric which surrounds a conductor core. For perfect and lossy dielectric distributions, total induced currents at the conductor surface are computed. It was found from those results that electromagnetic characteristics of the multilayered dielectric are largely dependent on dielectric distribution.

• 한국전자파학회논문지
• /
• 제21권2호
• /
• pp.170-178
• /
• 2010

논문에서는 전원부에서 노이즈가 발생되어 신호선에 노이즈가 유기될 때, 유전체의 손실 특성이 노이즈에 미치는 영향에 관해서 연구를 하였다. 이를 분석하기 위해 Full-wave 시뮬레이터인 Ansoft사의 HFSS(High Frequency Structure Simulation)와 CST사의 MWS(MicroWave Studio)의 계산 결과와 측정 결과를 비교하여 신뢰성을 확보하였고, 실제 사용되고 있는 4가지의 상용 기판에 대한 유기되는 노이즈를 해석하였다. 또한, TLM(Transmission Line Method)를 이용해서 전원면의 회로 모델 구성 시 기판의 유전체 손실을 반영할 수 있는 Debye 모델을 적용하여 주파수에 대한 임피던스를 분석할 수 있는 모델을 적용 측정 결과와 3 GHz까지 일치하는 모델을 얻었다.