• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.72-75
• /
• 2016

In this paper, we proposes a internal antenna for wireless DVI dongle device using the folded monopole structure. The proposed antenna uses a basic structure of spiral and monopole. The antenna optimized for parameters length, gap, width, and rectangle of folded monopole antenna using the spiral structure. To confirm the characteristics of the antenna parameters, HFSS from ANSYS Inc. was used for the analysis. We used an FR4 dielectric substrate with a dielectric constant of 4.4. The DVI dongle size of the proposed antenna is $50{\times}40{\times}1.6mm$, and the size of the antenna area is $10{\times}40mm$. There is a value of return loss less then -10dB in 2.4GHz and 5.8GHz, band and the maximum antenna gain is -4.13dBi. The utilization possibility of the wireless DVI Dongle antenna have a folded monopole with spiral shape could be confirmed according to compare and analyze the simulation and measurement data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.989-992
• /
• 2001

(Ba$\sub$0.6-x/Sr$\sub$0.4/Ca$\sub$x/)TiO$_3$(x=0.10, 0.15, 0.20) specimens were fabricated by the solid state reaction method and then the structural and dielectric properties as a function of the composition ratio and sintering temperature were studied. The BSCT(50/40/10) specimen sintered at 1500$^{\circ}C$ showed the highest average grain size(18.25 ${\mu}$m). The Curie temperature and dielectric constant at room temperature decreased with increasing Ca content. The dielectric constant and dielectric loss of the BSCT(50/40/10) specimen, sintered at 1450$^{\circ}C$, were about 4324 and 0.972% at 1KHz, respectively. Dielectric constant at room temperature decreased with increasing an applied field, tunability of the BSCT(50/40/10) sintered at 1300$^{\circ}C$ was 18%.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.4
• /
• pp.129-137
• /
• 1996

In this paper, we simulated a radiation pattern directivity of microstrip patch antenna for 9[GHz] using the computer. It is analyzed and compared the directivity of field characteristics at two different aspects. One is that of 1-dimension and 2-dimension array, the other is that of a linear and planar array antenna. We tried the constants for the simulation of teflon substrate, dielectric constant ${\varepsilon}r=2.50$, ground plane conductor thickness t=0.03556, substrate height h=0.72188, dielectric loss degree $tan{\delta}$=0.00085, characteristics impedence of line $Zo=50({\Omega})$. The major advantage of microstrip patch antenna is that the arrangement of antenna is associated with the directivity and effectiveness. We have been studied the difference of the radiation pattern of antenna with wave variety through computer simulation.

• ETRI Journal
• /
• v.41 no.3
• /
• pp.289-297
• /
• 2019

In this paper, a wideband, circularly polarized patch antenna is proposed that leverages the unidirectional resonant modes of a circular patch mounted on top of a grounded dielectric-ferrite substrate. The proposed antenna is fed via the proximity coupling method and several parasitically coupled patches are placed on a dielectric superstrate to enhance the impedance bandwidth of the antenna. The resonant modes of the structure rotate only in the clockwise or counter clockwise directions. In the frequency range where the effective permeability of the ferrite layer is negative, the resonance frequencies of these modes differ significantly, which produces a large axial ratio (AR) bandwidth. For the proposed antenna, the numerical results show the 10 dB impedance bandwidth to be around 44% and the 3 dB axial ratio bandwidth to be higher than 64%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.1-5
• /
• 2010

This paper deals with a method to measure the thickness of scale-layer, iron oxide formed on the surface of the rolling steel, using a dielectric lens antenna. The dielectric lens antenna has an independent characteristic with the frequency in the X-band and changes the spherical wave radiated from a horn antenna into a plane wave at the focusing point. Using this concept, we regard a scale-layer on the rolling steel as a dielectric-PEC(Perfect Electric Conductor) layer and apply a theoretical analysis of the normal-incident plane wave. To reduce the phase error arising from the use of the dielectric lens antenna, this paper utilizes a regression process algorithm. In comparison with the conventional iteration algorithm, the present algorithm led to a unique solution for the thickness of the scale-layer.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.6
• /
• pp.246-249
• /
• 2007

A triple-band antenna was developed and fabricated by LDS(Laser Direct Structuring) process. The effects of the plating rate and heat treatment condition were investigated and the gains of fabricated antennas were measured at various frequencies. The laser irradiated surface shows clearly that there are prominence and depression. It shows anchoring effect between a plating material and ablation surface. The plating rate was decreased when the plating material is exhausted in the solution. This solution needs to refreshed by the new aid solution. The copper plating thickness is decreased with the increase of heat treatment temperature in the same time but it does not change other condition. The gain of LDS antenna showed higher than the generally processed antenna. This result was related with practical use of the dimension and effective dielectric constant.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.983-993
• /
• 2001

This paper proposed a novel chip type ceramic dielectric antenna by using the advanced meander line technique that the radiational metals are formed on the face of ceramic dielectric(8$\times$4$\times$1.5 mm, alumina) and both faces of substrate(1.0 mm thickness, FR-4). The performance of the antenna model has a good agreements between measurements and computed results. Resultly, it has a 10 dB return-loss bandwidth(2.4∼2.4835 GHz) and 1.7 dBi measured radiation gain for Bluetooth application. The proposed antenna model can overcome the limited radiation of the small-sized antenna.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.539-544
• /
• 2017

In this paper, the broadband patch antenna for human counting systems is designed and fabricated using by the air dielectric substrate. Proposed antenna has a patch structure of the square structure with a 5 mm air layer and the vertical connection between the patch antenna and CPW feeding line is realized the stepped impedance structure. Optimized antenna through a 3D EM simulator is fabricated on a jig by manufacturing an antenna jig using a 3D printer with a size of 16.6 * 16.6 * 5 mm3. Proposed antenna is measured with the maximum gain of 5.71 dBi and the VSWR of below 2:1 at a frequency of 7.2 to 9.8 GHz. Also, a half power beam width characteristic of the antenna is measured $70^{\circ}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.297-309
• /
• 1997

In this paper, A small inverted F Antenna with 1.9 GHz frequency band is studied theoretically, characterized by numerical analysis with computer and fabricated in order to use in the proximity sensor. Because of small space for antenna in proximity sensor, .lambda. /4 length plate and dielectric material are used to reduce the size of antenna and broaden the bandwidth. Finite ground body's affection is compensated by dielectric top loading effect which strengthen front direction power about 4 dB. Fabricated antenna is measured and the result is that resonant frequency is 1900.05 MHz, VSWR is 1.02, bandwidth is 194 MHz and input impedance is 50.45-j0.108 [ .ohm. ].

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.832-837
• /
• 2006

Antennas were fabricated by physical(adhesive) and chemical(deposition+plating) method on organic-inorganic composite material. And antennas were measured dielectric constant and gain. Dielectric constant of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness and number of conduction material composition. But antennas were fabricated by chemical method was reached to 90 % of dielectric material. Gain of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness. But they were unrelated with conduction material composition. The other side antennas were fabricated by chemical method excelled more 0.8 dBic than antennas were fabricated by physical method in gain of antenna. Finally, chemical method can expect excellent product process because it can produce smaller size, higher gain and elimination of many handworks.