본 논문은 알루미나의 초기 성형밀도가 소결후 소결밀도에 미치는 영향에 대한 것이다. 실험에서는 두가지의 Reactive alumina powder (ALCOA A-16, A-17)를 사용하였으며, 넓은 범위의 성형밀도를 얻기 위하여 낮은 성형압을 가할 수 있는 기계적으로 작동하는 press와, 높은 성형압을 가할 수 있는 유압식 press를 사용하여, 이론밀도의 35%에서 65% 범위의 시편들 (A-16 alumina powder)과 46%에서 66% 범위의 시편들 (A-17 alumina powder)을 준비하였다. 성형밀도를 Log (성형압)에 대해 plot해 A-16과 A-17 alumina powder들에 대한 Compaction mechanism이 추론되었다. 1350, 1450, 155$0^{\circ}C$에서 소결하여 밀도증가량 ($D_T$-$D_P$)을 상대 성형밀도($D_P$/$D_T$) 에 대해 plot해 Ford가 제안한 두 변수 사이의 포물선 관계가 잘 성립 함을 보였다.
고무나 우레탄과 같은 고 탄성력을 이용하여 튜브를 임의의 형상으로 성형하는 고 탄성체 성형방법은 타 공정에 비해 높은 치수 정밀도와 생산 공정의 단축, 에너지 절감 등을 기대할 수 있는 차세대 성형기술이라 할 수 있다. 본 연구에서는 탄성체에 대한 소재 물성시험과 특성평가를 통해 고 탄성체 성형에 적합한 소재를 선정하고 시험으로 얻어진 응력-변형률을 이용하여 비선형 재료상수를 결정하여 성형해석에 필요한 물성 데이터를 확보하였다. 또한, 랙튜브에 대한 유한요소해석을 통해 탄성체의 두께변화에 따른 공정변수의 영향을 검토하였다.
This study was conducted to investigate the organizational climate of the agricultural extension education agencies and its influence on their educators` attitude toward job in Korea. The specific objectives of the study were 1) to identify the educators` perception of the organizational climate in the agricultural extension education agencies, and 2) to determine whether or not the educators` perception of the organizational climate influnce on their attitude toward job. Organizational climate has bees defined by many scholars as the properties of the social psychological environment perceived by organization members. There are various theoretical interpretations offered by die scholas about the effect of organizational climate upon organization members` behavior. Through a series of the theoretical reviews, this study could draw more than twenty variables in four types of organizational climate which might be perceived by the educators of agricultural extension education agencies and might influence upon their attitude toward job. The data were collected mainly through questionnaires sent to the responsible officers for administering the questionnaires for all adult educators of 30 agricultural extension education agencies randomly sampled from the population of 190 agencies. After data cleaning, a total of 629 responded questionnaires were analyzed for the study. The statistical methods used in the study were percentile, correlation, one way analysis of variance and multiple regression analysis. The two major findings of the study were as follows : 1. The organizational climate of agricultural extension education agencies were classified into four types : 1) democratic-autonomous, 2) cooperative-friendly, 3) achievement-oriented, and 4) bureaucratic-authoritarian. Among these of organizational climates, the cooperative-friendly one was most positively but the bureaucratic-authoritarian one was least positively perceived by the educators. 2. The educators` potion of the organizational climate and their attitude toward job were significantly correlated. The educators` perception of the organizational climate explained 41 percent of the variance of their attitude toward job in a multiple regression analysis In particular, the perception of the achievement oriented type of the organizational climates alone explained 34 percent of the variance of the favorable attitude.
The following results were obtained from a series of studies to accumulate data to reduce the coefficient of friction for press dies by performing tribological tests before and after the UNSM treatment of SM45C. The UNSM-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those for untreated materials. When loads of 5 N, 7.5 N, and 10 N were applied to the untreated material of SM45C, the coefficient of friction was approximately 0.76-0.78. With the large specimen, a value of 0.72-0.78 was maintained at a load of 50 N despite the differences in the size of the wear specimen and working load. Tribological tests of large specimens of SM45C treated with UNSM under tribological conditions of 100 N and 50 N showed that the frictional coefficient and time constant stably converged between 0.7 and 0.8. The friction coefficients of the small specimens treated with UNSM showed values between 0.78 and 0.75 under 5 N, 7.5 N, and 10 N. The friction coefficients of the SM45C treated with UNSM were comparable to each other.
Micro-fluidic chip has been fabricated by lithography process on silicon or glass wafer, casting using PDMS, injection molding of thermoplastics or 3D printing, etc. Among these processes, 3D printing can fabricate micro-fluidic chip directly from the design without master or template for fluidic channel fabricated previously. Due to this direct printing, 3D printing provides very fast and economical method for prototyping micro-fluidic chip comparing to conventional fabrication process such as lithography, PDMS casting or injection molding. Although 3D printing is now used more extensively due to this fast and cheap process done automatically by single printing machine, there are some issues on accuracy or surface characteristics, etc. The accuracy of the shape and size of the micro-channel is limited by the resolution of the printing and printing direction or layering direction in case of SLM type of 3D printing using UV curable resin. In this study, the printing direction and thickness of each printing layer are investigated to see the effect on the size, shape and surface of the micro-channel. A set of micro-channels with different size was designed and arrayed orthogonal. Micro-fluidic chips are 3D printed in different directions to the micro-channel, orthogonal, parallel, or skewed. The shape of the cross-section of the micro-channel and the surface of the micro-channel are photographed using optical microscopy. From a series of experiments, an optimal printing direction and process conditions are investigated for 3D printing of micro-fluidic chip.
Guo, Li-Yan;Zhang, Shen;Suo, Zhen;Yang, Chang-Shuang;Zhao, Xia;Zhang, Guo-An;Hu, Die;Ji, Xing-Zhao;Zhai, Min
Asian Pacific Journal of Cancer Prevention
/
제16권7호
/
pp.2745-2749
/
2015
Objective: To study the PLCE1 gene rs2274223 polymorphism with regard to esophageal cancer and its interaction with diet, lifestyle, psychological and environmental factors in Southwest Shandong province. Materials and Methods: A case series study (case-case) was conducted. Questionnaire data were collected and 3 ml-5ml venous blood was drawn for DNA extraction among the qualified research subjects. PLCE1 gene polymorphism was detected after PCR amplification of DNA. SPSS 13.0 software was used for statistical analysis of the data. Results: The three genotypes A/A, A/G and G/G PLCE1 gene rs2274223 was 31, 16 and 4 cases, accounting for 60.8%, 31.4%, 0.08% respectively. The difference of three genotypes (AA/GA/GG) proportion between negative and positive family history of patients was statistically significant, ${\chi}^2=6.213$, p=0.045. There was no statistically significant relationship between PLCE1 gene rs2274223 polymorphism and smoking, drinking, ${\chi}^2=0.119$, p=0.998, and ${\chi}^2=1.727$, p=0.786. There was no linkage of the three rs2274223 PLCE1 gene genotypes (AA/GA/GG) proportion with eating fried, pickled, hot, mildew, overnight, smoked, excitant food, eat speed, salt taste or not (p>0.05). or with living environment pollution and nine risk factors of occupational exposure (p>0.05). There was no statistically significant difference in TS scores between different genotype of rs2274223 PLCE1 gene. Conclusions: The PLCE1 rs2274223 polymorphism has a relationship with family history of esophageal cancer, but does not have any significant association with age, gender, smoking, alcohol drinking, food hygiene, eating habits, living around the environment and occupation in cases.
The consumption of foods rich in TDF should not be associated with impaired mineral absorp-tion and long-term mineral status. In surveys of populations consuming high amounts of TDF e.g Third World populations and vegetarinas gross deficiencies in mineral nutrition have not been noted. If mineral status is low among these groups it is most likely caused by the inadequacy or imbalance of the diet and not by the TDF. The key word is interaction which should be inte-rpreted in dietary imbalances that produce nut-rient deficiencies. There are no strong data to support the concept that TDF inhibits mineral absorption through a binding chelation mechanism. Limited data sug-gest that positively charged groups on polymers such as chitosan and cholestyramine will decrease iron absorption in humans and animals. Because TDF does not contain positively charged groups future research should be directed at the possible role of protein consumed along with TDF and the combination of effects on mineral nutrition Phytic acid is acknowledged as a potent chela-tor of zinc. However its association with zinc and its propensity to lower Zn bioavaiability may enhance the absorption of other elements notably copper and iron. The importance of interactions among nutrients including TDF will gain addi-tional attention in the scientific community. Soluble and insoluble dietary fiber function di-fferently in the intestine. Insoluble fibers accele-rate movement through the intestine. Soluble die-tary fibers appear to regulated blood concentra-tions of glucose and cholesterol albeit by some unknown mechanism. In creased viscosity produ-ced by the SDF in the intestine may provide an explanation of how this class of polymers affects plasma glucose cholesterol and other nutrients. Employing a double-perfusion technique in the rat we demonstrated that viscosity produced by SDF will delay transfer of zinc into the circulatory system. This delayed absorption should not be interpreted as decreased utilization. A great deal of additional research is required to prove the importance of luminaly viscosity produced by SDF on slowing nutrient absorption or regulating bllod nutrient homeostasis. Increased intake of TDF in the total human diet appears desirable. A dietary intake of 35g/day should not be considered to have a negative effect on mineral absorption. It is important to educate people that an intake of more than 35g TDF/day may cause an imbalance in the diet that can adve-rsely affect mineral utilization. Acknowledgments. Appreciation is given to Dr. George V. Vahouny(deceased) who was intense a great competitor in and out of science and who gave the author inspiration Portions of this work were supported by the University of Missouri Ag-ricultural Station and by a grant from the Univer-rch Support Grant RR 07053 from the National Institutes of Health. Contribution of the Missouri Agriculatural Experiments Station Journal Series No. 10747.
본 논문에서는 IEEE 802.11n 표준과 같은 근거리 무선통신망 응용을 위한 10비트 100MS/s 27.2mW $0.8mm^2$ 0.18um CMOS ADC를 제안한다. 제안하는 ADC는 고속 동작에 적합한 3단 파이프라인 구조를 기반으로 제작되었으며 각단에 공통적으로 사용되는 증폭기, 프리앰프 및 저항열을 최대한 효율적으로 공유함으로써 전력 소모 및 면적을 최소화하였다. 첫 번째 MDAC과 두 번째 MDAC에는 스위치 저항과 메모리 효과가 없는 증폭기 공유기법을 사용하였고, 세 개의 4비트 flash ADC에는 단 하나의 저항열만을 사용하는 동시에 두 번째 flash ADC와 세 번째 flash ADC에는 프리앰프를 공유하여 전력 소모와 면적을 최소화하였다. 보간 기법을 사용하여 요구되는 프리앰프의 수를 반으로 줄였으며, 프리앰프의 공유 및 보간 기법으로 인한 영향을 최소화하기 위해 낮은 킥-백 잡음을 갖는 비교기를 추가로 제안하였다. 제안하는 시제품 ADC는 0.18um 1P6M CMOS 공정으로 제작되었으며, 측정된 DNL 및 INL은 10비트 해상도에서 각각 최대 0.83LSB와 1.52LSB의 수준을 보이며, 동적 성능으로는 100MS/s의 동작 속도에서 각각 52.1dB의 SNDR과 67.6dB의 SFDR을 갖는다. 시제품 ADC의 칩 면적은 $0.8mm^2$이며 전력 소모는 1.8V 전원 전압을 인가하였을 때 100MS/s에서 27.2mW이다.
본 논문에서는 3개의 유전체층 위의 변하는 저항율을 가진 저항띠 격자구조에 의한 E 분극 전자파 산란 문제 들은 Fourier-Galerkin 모멘트 법을 이용하여 저항띠의 변하는 저항율과 3개의 유전체층의 비유전율 및 두께에 대한 효과를 알기 위해 해석하였다. 유도되는 표면전류는 차수 $\alpha$=0과 $\beta$=1의 값을 가지는 직교다항식의 일종인 Jacobi-polynomial ${P^{(\chi,\beta)}}_p$(.)의 급수로 전개하였으며, 저항띠의 변하는 저항율은 한쪽 모서리에서는 0이고 다른 쪽 모서리로 가면서 유한한 값으로 선형적으로 변하는 것으로 가정하였다. 정규화된 반사 및 투과전력은 저항띠의 변하는 저항율과 유전체 층들의 비유전율 및 두께를 변화시켜 얻었다. 급변점들은 전파모드와 감쇠모드사이 에서 고차모드가 모드 전환펠 때 관측되었으며, 전반적으로 국부적인 최소점들은 유전체 충들의 비유전율이 증가함에 따라 격자주기가 작아지는 값에서 발생하였다. 변하는 저하율에 따른 정규화된 반사전력 및 투과전력의 패턴은 균일 저하율 및 완전도체 경우와 매우 다르다는 것이 주목된다. 본 논문의 제안된 방법은 변하는 저항율, 균일 저항율및 완전도체 띠들의 경우에 대한 산란문제들을 해결할 수 있다.
오늘날 유럽 국가들을 중심으로 경관이 정치, 행정, 학문, 시민사회 등을 망라하는 모든 분야에서 환경만큼 중요한 화두로 사람들의 입에 자주 오르내리고 있다. 그 동안 한국에서는 이러한 국제적 조류에 부응하기 위하여 각 학문 분야나 행정 분야별로 나름대로 경관 개념을 다양한 정책에 반영하려고 노력해 오고 있다. 그럼에도 불구하고 아직까지는 그 성과가 만족할 만한 수준에 있지 않은 실정이다. 이러한 실정을 감안하여 본고는 먼저 경관이 가지는 복합적 가치와 복수적 의미를 유럽의 연구 결과를 토대로 검토해 보았다. 그런 다음 아직까지 경관에 대한 관심이 상대적으로 저조한 한국이 앞으로 추구해 나가야 하는 국토경관의 정책과 연구의 미래 방향을 모색해 보았다. 경관은 지금까지 상황에 따라 다양한 의미로 정의되어 왔을 만큼 지극히 복합적인 개념을 가진 대상이므로 전체론(Holism)의 관점에서 이해되어야 한다. 경관을 연구하는 학문 분야들은 학제 간 또는 다학문적 협력에 그치지 말고 학문의 경계를 초월하는 종합적 접근방법을 공동으로 개발하여 적용해야 한다. 유럽의 경우와 같이, 한국에서도 경관의 질과 다양성의 악화와 퇴보가 사람들의 일상생활의 질에 대하여 부정적 영향을 끼친다는 사실을 법률을 통하여 인정할 필요가 있다. 농촌경관의 급변으로 사라져 가는 자연유산과 문화유산의 보존이 농촌이 노령화를 지나 공동화(空洞化) 되기 이전에 연구와 정책의 중요한 과제가 되어야 한다. 그러기 위해서는 전체론적 관점에서 학문의 경계를 초월하는 방법론을 토대로 경관 특성을 평가하고 그 유형을 분류하는 사업을 시급히 착수해야 할 것이다. 경관에 관한 업무를 취급하는 공무원은 물론이고 정치가, 일반 국민, 학교 학생 등을 상대로 하는 경관에 대한 교육이 시급히 요구된다. 또한 정부는 국가적 차원의 경관 정책을 총체적으로 수립해야 하는 한편 공간계획(Spatial Planning)이나 법률과 같은 분야에 경관 개념이 전반적으로 침투되도록 노력해야 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.