• East Asian mathematical journal
• /
• v.39 no.5
• /
• pp.523-528
• /
• 2023

Let S_n = [S(i, j)]_1≤i,j≤n and S^*_n = [S(i + j, j)]_1≤i,j≤n where S(i, j) is the Stirling number of the second kind. Choi and Jo [On the determinants of the square-type Stirling matrix and Bell matrix, Int. J. Math. Math. Sci. 2021] obtained the diagonal entries of matrix U in the LU-factorization of S^*_n for calculating the determinant of S^*_n, where L = S_n. In this paper, we compute the all entries of U in the LU-factorization of matrix S^*_n. This implies the identities related to Stirling numbers of both kinds.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.37-48
• /
• 1984

The yield-line analysis is used for earring out the limit analysis of reinforced concrete slabs which are for example like those of vertical walls of tanks subjected to the loads of hydrostatical type. It is considered both isotropic and orthotropic reinforcement using the coefficient of orthotropy with different edge conditions. The yield-line analysis is carried out by using the vertical work method and four collapse mechanisms including the fan mechanisms which is more realistic than over diagonal mechanisms is considered. It is found that the fan mechanisms are more complicated than ever simple diagonal mechanisms which have used for the orthotropically reinforced concrete slabs subjected to hydrostatic pressures. Especially Horton's study is extended in this study, and they are formulated to the constrained multi-variables nonlinear optimization problems, which are solved by the Rosen-Brock Hillclimb Procedure Program and are more critical.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.662-668
• /
• 2013

Mobile communication systems have been adopting link adaptive transmission schemes such as adaptive modulation and coding (AMC) and hybrid-ARQ (HARQ). Incremental redundancy (IR) HARQ scheme is known to be highly efficient in terms of throughput and power consumption and can be a good solution for mobile communication systems. In this paper, we propose an IR-HARQ scheme based on dual-diagonal parity-type block LDPC codes in which we define a transmission priority of coded bits and propose the sub-packet construction rule. We present the throughput performance of IR-HARQ with various modulation and coding and multi-antenna modes. Consequently, the proposed scheme provides the improvement of system throughput by elaborate link adaptation with CQI information.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• Computers and Concrete
• /
• v.33 no.3
• /
• pp.251-264
• /
• 2024

The present study pertains to the effects of variations in the location and size of drilled web openings on the behavior of fixed-fixed reinforced concrete (RC) beams. For this purpose, a reference bending beam with a transverse opening in each half span was tested to failure. Later, the same beam was modeled and analyzed with the help of finite element software using ABAQUS. Upon achieving close agreement between the experimental and numerical results, the location and size of the web opening were altered to uncover the effects of these factors on the shear strength and load-deflection behavior of RC beams. The experimental failure mode of the tested beam and the numerical results were also verified by theoretical calculations. In numerical analysis, when compared to the reference (D0) specimen, if the distance of the opening center from the support is 0 or h or 2h, reduction in load-bearing capacity of 1.5%-22.8% or 2.0%-11.3% or is 4.1%-40.7%. In other words, both the numerical analyses and theoretical calculations indicated that the beam behavior shifted from shear-controlled to flexure-controlled as the openings approached the supports. Furthermore, the deformation capacities, energy absorption values, and the ductilities of the beams with different opening diameters also increased with the decreasing distance of the opening from supports. Web compression failure was shown to be the predominant mode of failure of beams with large diameters due to the lack of sufficient material in the diagonal compression strut of the beam. The present study indicated that transverse openings with diameters, not exceeding about 1/3 of the entire beam depth, do not cause the premature shear failure of RC beams. Finally, shear damage should be prevented by placing special reinforcements in the areas where such gaps are opened.

• The Research Journal of the Costume Culture
• /
• v.19 no.3
• /
• pp.460-472
• /
• 2011

This paper developed motifs through the use of images of masks with which the Korean innate consciousness of aesthetics is expressed. The motifs were applied to fashion items. This paper investigated the concept, origin and types of traditional masks through the existing literature. Using the computer graphic programs of Illustrator and Photoshop CS2, three basic motifs were set from the images of the nobleman, Bune of Hahoi Tal and Byeongsan Tal. Each motif was extended into two motifs by changing shape and color. For the basic motif design, this study sought to express contemporary images, suitably for each fashion item, while maintaining the basic shape of the masks and their traditional images. In addition, this study set the concept of the design so that could be accepted by various age groups. For the design of handkerchiefs, a rotating array, involving enlargement, reduction, repetition, and the gradation of motifs, as well as a diagonal symmetric array, and all-over patterns were developed. The T-shirt design created here was divided into a half-sleeve box type, a round neckline sleeveless type, a V-neckline close-fitting sleeveless type, and a V-neckline close-fitting cap sleeve type. For the design of necklaces, OLED or LED, which are considered as a future display type, was used. Additionally, the production of an entertainment styled new atmosphere is proposed.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.44-50
• /
• 2019

In rack-type warehouses, it is difficult to extinguish fires effectively using sprinkler systems because high fire load commodities are stacked vertically and densely. In this study, an actual size rack structure was constructed and the effectiveness of the fire extinguished by the sprinkler system was confirmed through fire tests according to the type and arrangement of the sprinkler head in the rack structure. Through this study, to effectively suppress fires in rack-type warehouses, it is necessary to use sprinkler heads with a volume of more than 115 LPM and sprinkler heads need to be installed at the diagonal corner positions of the commodities of each rack.

• Journal of the Korean housing association
• /
• v.25 no.3
• /
• pp.165-179
• /
• 2014

The purpose of this study was to draw application elements of housing interior design according to user-oriented sensibility types. The sensibility evaluation experiments were conducted to target the general user 118 people using the sensibility evaluation tool for housing interior space. The results of the analysis were as: To produce the 'cozy' space, the colors and materials giving soft and natural feeling should be used. For the 'practical' space, type of ceiling and window that give the visually open feeling, the user-oriented furniture arrangement that allows using the space efficiently. For the 'cheerful' space, the simple and natural effects should be produced by using closed space that stable. For the 'traditional' space, the natural fishing material having rough texture should be used. For the 'unique' space, the space contained the dynamic feeling by the diagonal or vertical line and the graphic expression in the wall. For the 'congenial' emotional space, basic is the symmetric, stable and simple space. On the other hand, for the material, small size, natural texture or typical and soft materials should be used. For the 'sensuous' space, the dynamic and vertical sense of space should be expressed by the type of ceiling. The most important elements for the space of 'gorgeous' sensibility, is the color.

• Earthquakes and Structures
• /
• v.7 no.4
• /
• pp.553-570
• /
• 2014

In this study, nonlinear dynamic analyses were performed in order to evaluate and compare the structural response of different type of moment resisting frame buildings equipped with conventional braces (CBs) and buckling restrained braces (BRBs) subjected to near-field ground motions. For this, the case study frames, namely, ordinary moment-resisting frame (OMRF) and special moment-resisting frame (SMRF) having two equal bays of 6 m and a total height of 20 m were utilized. Then, CBs and BRBs were inserted in the bays of the existing frames. As a brace pattern, diagonal type with different configurations were used for the braced frame structures. For the earthquake excitation, artificial pulses equivalent to Northridge and Kobe earthquake records were taken into account. The results in terms of the inter-story drift index, global damage index, base shear, top shear, damage index, and plastification were discussed. The analysis of the results indicated a considerable improvement in the structural performance of the existing frames with the inclusion of conventional and especially buckling-restrained braces.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.5
• /
• pp.421-427
• /
• 2014

In this paper, the kinestatic control algorithm using a six-axis compliant device is presented. Unlike the traditional control methods using a force/torque sensor with very limited compliance, this method employs a compliant device to provide sufficient compliance between an industrial robot and a rigid environment. This kinestatic control method is used to simply control the position of an industrial robot with twists of compensation, which can be decomposed into twists of compliance and twists of freedom. A simple design method of a six-axis parallel-type compliant device with a diagonal stiffness matrix is presented. A compliant device prototype and kinestatic control hardware system and programming were developed. The effectiveness of the kinestatic control algorithm was verified through two kinds of kinestatic control experiments.