• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.163-177
• /
• 2020

Purpose: While it is very important to maintain facilities recently, the introduction and its application of high technology in the facility maintenance industry has increased. It is necessary for high technology to secure reliability through the verification and certification system of diagnostic equipment to have an effective impact in the field, but there is difference between the industry's perspective and realistic level of technology apart from social demand for the system of the system. This paper dealt with the introduction of a verification and certification system for rational facility diagnostic equipment with the opinion survey on managers about the current situation. Method: Survey is carried out targeting managers in the maintenance and construction regarding the necessity and urgency of introducing a verification and certification system to promote the introduction and its application of high technology of diagnostic equipment and facility inspection. Also, the introduction to a verification and certification system was reviewed for advanced facility diagnostic equipment through foreign research about similar systems and comparative analysis of similar systems related to the certification of 21 domestic equipment. Result: It showed that, regarding the application of high technology, it is necessary for most managers to introduce high technology such as drones, robots, etc., in the maintenance industry, and when high technology is introduced, it will have a considerable effect in the field. On the other hand, the current technology level in Korea is relatively low, so it turned out to take a certain amount of time for the application of technology. Also, it was found that the management of reliable facility diagnostic equipment will be possible through the introduction of the verification and certification system for facility diagnosis equipment. Meanwhile, the survey is conducted on similar systems about foreign and domestic diagnosis and measuring equipment, etc., but there is no system to verify and certify equipment applied with high technology directly to facility diagnosis maintenance. However, because Japan has a system of verifying the performance of diagnostic equipment and South Korea has 21 similar inspection and diagnostic equipment certification systems among 186 certification systems, it is considered to be possible to design systems which utilize them. Conclusion: According to the managers' opinion, it seems that the introduction of the system supporting the application of 4th industrial technology for the equipment and the use of the equipment with high reliability has sufficient validity. However, because our high technology level is undervalued compared to the urgency, the system for checking high technology facilities and certifying diagnostic equipment should be to be implemented in form of escalation considering technical use and verification level. Apart from the introduction of the verification and certification system, it is necessary for special investment, support and efforts to promote advanced facility diagnostic equipment.

• Journal of Information Processing Systems
• /
• v.2 no.3 s.4
• /
• pp.189-193
• /
• 2006

In this study we propose an automatic reading system for diagnostic DNA chips. We define a general specification for an automatic reading system and propose a possible implementation method. The proposed system performs the whole reading process automatically without any user intervention, covering image acquisition, image analysis, and report generation. We applied the system for the automatic report generation of a commercialized DNA chip for cervical cancer detection. The fluorescence image of the hybridization result was acquired with a $GenePix^{TM}$ scanner using its library running in HTML pages. The processing of the acquired image and the report generation were executed by a component object module programmed with Microsoft Visual C++ 6.0. To generate the report document, we made an HWP 2002 document template with marker strings that were supposed to be searched and replaced with the corresponding information such as patient information and diagnosis results. The proposed system generates the report document by reading the template and changing the marker strings with the resultant contents. The system is expected to facilitate the usage of a diagnostic DNA chip for mass screening by the automation of a conventional manual reading process, shortening its processing time, and quantifying the reading criteria.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.3
• /
• pp.665-682
• /
• 2005

The sample reuse bootstrap technique has been successful to attract both applied and theoretical statisticians since its origination. In recent years a good deal of attention has been focused on the applications of bootstrap methods in regression analysis. It is easier but more accurate computation methods heavily depend on high-speed computers and warrant tough mathematical justification for their validity. It is now evident that the presence of multiple unusual observations could make a great deal of damage to the inferential procedure. We suspect that bootstrap methods may not be free from this problem. We at first present few examples in favour of our suspicion and propose a new method diagnostic-before-bootstrap method for regression purpose. The usefulness of our newly proposed method is investigated through few well-known examples and a Monte Carlo simulation under a variety of error and leverage structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.2
• /
• pp.70-76
• /
• 1984

In this paper, a functional m-redundant system, which is m-fault tolerant, is defined based on the graph-theory. This system is designed to be t(t$\geq$m) fault-diagnosable by comparing its unit's outcomes without additive test functions, so, the system down for diagnosis is not needed. The diagnostic model for this system is presented. It is to avail the redundancy of the system effectively. It is shown that this model can be converted into Preparata's model. Thus, the diagnostic characteristics of a functional m-redundant system is analyzed by the method originated by Preparata et al.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.355-358
• /
• 2015

산업용 CRDI 엔진에서 센서의 정보를 분석하여 최적의 조건으로 엔진이 동작하도록 하기 위해 산업용 CRDI 시스템에 적합한 OBD-II 프로토콜을 설계하고 ECU의 센서 정보를 전문가 아닌 일반 사용자가 내용을 이해하기 쉽도록 사용자 중심의 진단기의 개발이 필요하다. 따라서, 본 연구에서는 자동차 고장진단 신호 및 센서 출력 신호를 유선시스템과 무선 시스템인 블루투스 모듈을 이용하여 실시간 통신이 제공 될 수 있는 OBD-II 진단기 S/W를 설계 및 구현하였다. 엔진이상으로 인한 사고의 예방이 가능하고, 최적의 조건으로 엔진이 동작하므로 과도한 배기가스 배출이나 불완전 연소가스 배출과 같은 대기환경오염을 예방할 수 있다.

• Language and Information
• /
• v.19 no.1
• /
• pp.75-101
• /
• 2015

This study investigated the distribution of subject properties in Korean. Based on the previous studies on so-called 'subjecthood diagnostics' in Korean Multiple Subject Constructions (MSCs), the current study investigates how different subject properties are distributed in single subject constructions (Non-MSCs) and MSCs. Focusing on two distinct subject properties - obligatory control (OC) of PRO and coordinated deletion (CD) - an empirical syntactic experiment was designed to test how these two subjecthood diagnostics behave in the Non-MSC and MSC environments. Seventy Korean native speakers were tested over magnitude estimation task, composed of 80 Korean sentences representing different subject properties in single or multiple subject constructions. Overall results showed (i) both OC and CD can be used as subjecthood diagnostic tests in the Non-MSC environments, but (ii) that only OC can be used as a subjecthood diagnostic test in the MSC environments.

• IE interfaces
• /
• v.3 no.2
• /
• pp.1-11
• /
• 1990

In this study, we will present a knowledge-based consulting system, called THYCONS, for diagnosing thyroid disorders. It has been developed to make the knowledge and expertise of the human expert more widely available, therefore achieving a high-quality diagnosis. Frames will be used to represent the medical knowledge of thyroid disorders, and several rules are attached in each slot of a frame. The uncertainty of diagnostic processes is manipulated by the subjective Bayesian method under the assumption that the pieces of evidence are conditionally independent. Searching for the group of diagnostic tests to be carried out and their optimum sequences will be established in order to infer a more correct diagnosis on the basis of maximum information gain with cost and time restrictions. Additionally. differential diagnosis will be carried out based on the information gained.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.294-296
• /
• 1988

The tomographic imaging that employs ultrasonic echos has achieved outstanding advances in recent years, and today, ultrasonic diagnostic equipment has become the tool that is absolutely indispensible for clinical operations. Meanwhile, the feasility of measuring blood flow in the heart and vessels by the use of Doppler effect in ultrasonic waves is a well known fact. With respect to the method of blood flow measurment, there are two kinds which employ continous wave and pulse wave doppler system. In this paper, we describe the measurment of Blood flow-turbulence using general purpose Digital Signal Processing Board which had been implemented for the purpose of real-time spectrum analyser. Blood flow-turbulence means the blood-flow behavior. And it's value proportional to the spectrum variance. Therefore mean frequency of blood signal and variance provide useful diagnostic information. We have applied to the major arteries and vein, obtained the information about the time dependent blood-flow behavior.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.4
• /
• pp.347-352
• /
• 2005

PD(Partial discharges) are small electrical sparks that occur within the electric insulation of cables, transformers and windings on motors. PD analysis is a proactive diagnostic approach that uses PD measurements to evaluate the integrity of this equipment. Recently, several diagnostic algorithms for classifying the type of PD and locating the defect position have been developed. In this work, a new PD recognition system is proposed, which utilizes approximate coefficients of wavelet transform as a feature vector, furthermore, introduces bank of Elman networks to recognize the various PD phenomena. In order to verify the performance of the proposed scheme, it is applied to the simulated PD data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.459-462
• /
• 2013

CRDI 시스템에서의 ECU는 센서의 정보를 분석하여 최적의 조건으로 엔진이 동작하도록 한다. 이러한 ECU의 프로그램 부분과 데이터 부분은 제작자에서만 변경할 수 있어 엔진을 진단하는 진단기의 경우 전문가가 아니면 사용하거나 내용을 이해하기가 쉽지 않다. 본 연구에서는 산업용 차량의 엔진 데이터 값을 OBD-II표준을 사용하여 입력받아 사용자 중심의 진단기를 PC 및 모바일용으로 개발하였다. 본 연구의 진단기는 운전자 중심의 진단 서비스를 제공하며, 자동차 고장진단 신호 및 센서 출력 신호를 유선시스템과 무선 시스템인 블루투스 모듈을 이용하여 실시간 통신이 제공되도록 함으로써 엔진이상으로 인한 사고의 예방이 가능하고, 최적의 조건으로 엔진이 동작하므로 과도한 배기가스 배출이나 불완전 연소가스 배출과 같은 대기환경오염을 예방할 수 있어 최근 대두되고 있는 에코산업에도 이바지 할 수 있을 것이다.