• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.12
• /
• pp.665-679
• /
• 2002

The fault diameter of a graph G is the maximum of lengths of the shortest paths between all two vertices when there are $\chi$(G) - 1 or less faulty vertices, where $\chi$(G) is connectivity of G. In this paper, we analyze the fault diameter of recursive circulant $G(2^m,2^k)$ with $k{\geq}3$. Let $ dia_{m.k}$ denote the diameter of $G(2^m,2^k)$. We show that if $2{\leq}m,2{\leq}k, the fault diameter of $G(2{\leq}m,2{\leq}k)$ is equal to $2^m-2$, and if m=k+1, it is equal to $2^k-1$. It is also shown that for m>k+1, the fault diameter is equal to di a_$m{\neq}1$(mod 2k); otherwise, it is less than or equal to$dia_{m.k+2}$.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.1
• /
• pp.56-60
• /
• 2005

Human chorionic gonadotrophin (hCG) and unconjugated estriol (uE3) were added to AFP to make what is commonly known as the Triple test. The Triple test combines results from these three tests and has been a standard screening procedure for several years. Recent studies have demonstrated the usefulness of adding inhibin-A to Down's syndrome risk assessment. The Quad test adds dimeric Inhibin-A (DIA) to the three other markers and uses the same computer program to calculate risk factors. Testing was performed between 14 and 21 weeks of gestation. Sample size were 648 samples and period of study was from 1, July, 2004 to 30, September, 2004. Used analytical methods for AFP, hCG and uE3 were radioimmunoassay (RIA) and dimeric inhibin A was enzyme-linked immunosorbent assay (ELISA). Adding dimeric inhibin-A as a fourth marker to the standard triple test increases the detection rate from 62 % to 75 % with a false-positive rate of 5%. The DIA based Quad test has been shown to be the most effective second trimester screening test for Down's syndrome suitable for routine use. Increased DIA values are observed during normal pregnancy where a bimodal pattern response is seen. Values increase during the first trimester, decline after 14 weeks, and re-ascend between 17-25 weeks. Values for DIA may be additionally elevated during a Down's syndrome pregnancy. Dimeric inhibin A is a glycoprotein hormone made by the ovary and placenta. DIA levels are twice as high in Down's syndrome pregnancies. AFP, hCG, and uE3 levels vary with gestational age, and incorrect gestational dating will influence results. DIA levels do not vary substantially with gestational age, resulting in greater screening accuracy. Although the Quad test is an improvement over the Triple test, it is important to underscore the fact that a positive test on both should be done. Most women who initially screen positive will be found to be carrying normal babies when amniocentesis and definitive diagnostic chromosome analysis are done.

• Korean Management Science Review
• /
• v.19 no.1
• /
• pp.117-128
• /
• 2002

In this Paper we investigate the performance of the five efficiency estimation methods which include the stochastic frontier model estimated by maximum likelihood (SFML), the stochastic frontier model estimated by corrected ordinary least squares (SFCOLS), the data envelopment analysis (DIA) model, the combined estimation of SFML and DEA (SFML + DEA), and the combined estimation of SFCOLS arid DIA (SFCOLS+ DEA) using Monte Carlo analysis. The results include: 1) SFML provides most accurate efficiency estimates for the sample sloe 150 or over,2) SFML+DEAor SFCOLS + DIA Perform better for the cases with sample sloe 25, 50, and low random errors, 3) SFCOLS performs better for the close with sample sloe 25, 50, and very high random errors.

• Molecules and Cells
• /
• v.38 no.12
• /
• pp.1086-1095
• /
• 2015

The psychrophilic organism Colwellia psychrerythraea strain 34H produces extracellular polysaccharide substances to tolerate cold environments. Sedoheptulose 7-phosphate isomerase (GmhA) is essential for producing $\small{D}$-glycero-$\small{D}$-mannoheptose 7-phosphate, a key mediator in the lipopolysaccharide biosynthetic pathway. We determined the crystal structure of GmhA from C. psychrerythraea strain 34H (CpsGmhA, UniProtKB code: Q47VU0) at a resolution of $2.8{\AA}$. The tetrameric structure is similar to that of homologous GmhA structures. Interestingly, one of the catalytic residues, glutamate, which has been reported to be critical for the activity of other homologous GmhA enzymes, is replaced by a glutamine residue in the CpsGmhA protein. We also found differences in the conformations of several other catalytic residues. Extensive structural and sequence analyses reveal that CpsGmhA shows high similarity to Escherichia coli DnaA initiatorassociating protein A (DiaA). Therefore, the CpsGmhA structure reported here may provide insight into the structural and functional correlations between GmhA and DiaA among specific microorganisms.

• Parasites, Hosts and Diseases
• /
• v.43 no.1 s.133
• /
• pp.15-18
• /
• 2005

The diagnosis of human hydatidosis is primarily made using radiological and serological methods. Radiological methods are generally of low specificity and serological methods lack sensitivity, especially for pulmonary disease. In this study the capabilities of a new rapid test, the hydatid antigen dot immunobinding assay (HA-DIA), which was developed for the diagnosis of pulmonary hydatidosis, were studied and compared with another immunodiagnostic method, indirect hemagglutination (IHA). The study subjects included 18 patients, 9 women, 9 men; range 7 to 63 years; mean 30 years, with surgically proven pulmonary hydatidosis, a control group comprised of 14 patients; viral respiratory infections (1), cirrhosis (2), connective tissue disease (2), taeniasis (3), and 6 healthy donors. We found that the HA-DIA test had a sensitivity of $67\%$ and specificity of $100\%$, and that the IHA test had a sensitivity of $50\%$ and specificity of $100\%$. We conclude that HA-DIA is a simple, rapid, low cost assay that does not require instrumentation and has a higher sensitivity than IHA for the diagnosis of pulmonary hydatidosis.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.8
• /
• pp.538-544
• /
• 2010

An experimental investigation is presented to study the effect nozzle spacing, jet to plate spacing and Reynolds number on the local heat transfer to normally upward impinging submerged circular water jets on a flat heated surface. Nozzle arrays are a single jet(nozzle dia. = 8 mm), a row of 3 jets(nozzle dia. = 4.6 mm, nozzle spacing = 37.5 mm) and a row of 5 jets(nozzle dia. = 3.6 mm, nozzle spacing = 25 mm), and jet to plate spacing ranging from 16∼80 mm(H/D = 2∼10) is tested. Reynolds number based on single jet exit condition is varied 30000∼70000($V_o$ = 3∼7 m/s). Except for the condition of H/D = 10, the average Nusselt number of multi-jet is higher than that of single jet. For H/D = 2, average Nusselt number is increased by 50.3∼82.5% for a row of 3 jets and by 52.9∼65.2% on a row of 5 jets when compared to the average Nusselt number on the single jet.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.648-654
• /
• 2009

In this paper, a method called bilateral diagonal 2DLDA is proposed for face recognition. Two methods called Dia2DPCA and Dia2DLDA were suggested to reserve the correlations between the variations in the rows and columns of diagonal images. However, these methods work in the row direction of these images. A row-directional projection matrix can be obtained by calculating the between-class and within-class covariance matrices making an allowance for the column variation of alternative diagonal face images. In addition, column-directional projection matrix can be obtained by calculating the between-class and within-class covariance matrices making an allowance for the row variation in diagonal images. A bilateral projection scheme was applied using left and right multiplying projection matrices. As a result, the dimension of the feature matrix and computation time can be reduced. Experiments carried out on an ORL face database show that the proposed method with three different distance measures, namely, Frobenius, Yang and AMD, is more accurate than some methods, such as 2DPCA, B2DPCA, 2DLDA, etc.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.60-75
• /
• 2006

The MPEG-21 Multimedia Framework initiative aims to support a wide range of networks and devices in the delivery and consumption of multimedia resources. One of the primary goals of MPEG-21 is universal multimedia access (UMA) through Digital Item Adaptation (DIA), which supports multimedia streaming to heterogeneous devices ensurung the same readability and seamlessness. We pioneer power saving of luminal devices with MPEG-21 DIA, so that the MPEG-21 DIA can also be used to support power saving, even though the framework is not primarily designed for power reduction and only limited power awareness is defined by DIA. We introduce several power-saving techniques conforming to MPEG-21 DIA specifications and show the dependency relation among introduced techniques. We achieve energy savings of up to $66\%$ in hand-held multimedia devices with minor QoS (quality of service) degradation.

• Journal of Broadcast Engineering
• /
• v.12 no.4
• /
• pp.342-349
• /
• 2007

In general multi-view system, all the view sequences acquired at the server are transmitted to the client. However, this kind of system requires high processing power of the server as well as the client, thus it is posing a difficulty in practical applications. To overcome this problem, a relatively simple method is to transmit only two view-sequences requested by the client in order to deliver a stereoscopic video. In this system, effective communication between the server and the client is one of important aspects. Therefore, we propose an efficient multi-view system that transmits two view-sequences according to user's request. The view selection process is integrated into MPEG-21 DIA (Digital Item Adaptation) so that our system is compatible to MPEG-21 multimedia framework. Furthermore, multi-view descriptors related to multi-view camera and systems are newly introduced. The syntax of the descriptions and their elements is represented in XML (extensible Markup Language) schema. Intermediate view reconstruction (IVR) is used to reduce such discomfort with excessive disparity. Furthermore, IVR is useful for smooth transition between two stereoscopic view sequences. Finally, through the implementation of testbed, we can show the valuables and possibilities of our system.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.4
• /
• pp.289-307
• /
• 2010

We developed a photometric pipeline to be used for a wide field survey. This pipeline employs the difference image analysis (DIA) method appropriate for the photometry of star dense field such as the Galactic bulge. To verify the performance of pipeline, the observed dataset of the open cluster M11 was re-processed. One hundred seventy eight variable stars were newly discovered by analyzing the light curves of which photometric accuracy was improved through the DIA. The total number of variable stars in the M11 observation region is 335, including 157 variable stars discovered by previous studies. We present the catalogue and light curves for the 178 variable stars. This study shows that the photometric pipeline using the DIA is very useful in the detection of variable stars in a cluster.