• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10B
• /
• pp.660-668
• /
• 2005

Recently, the Internet-based communication method has been adopted as an open networking solution in the field of remote control and data acquisition. In the current Internet, most networking applications are developed according to the client-server approach. In this paper, we propose an innovative Device Configuration Protocol (DCP) that exchanges the traditional role between client and server to provide a uniform device interface over the Internet for various field devices. The proposed protocol is implemented as an application-level protocol running on top of the standard TCP/IP protocols. Also, the DCP protocol is extended with real-time processing to work with the FlowLabel of IPv6 for QoS (Quality of Service) support. The simulation results show that the real-time packets can be processed prior to the given deadline regardless of throughput, as compared to the normal packets.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.56-65
• /
• 2009

The single device that is combined more than one communication systems in shared band is called collocated system. In this paper, the collocated system is made by combination of Wi-Fi and WiMAX system. Performance of the collocated system is analysed by using two communication model, Collaborative and Non-Collaborative. To minimize the mutual interference between Wi-Fi and WiMAX system in collocated system, the circulator-based collocated system is proposed and analysed it's performance characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1532-1541
• /
• 2015

D2D(Device-to-Device) communication is a promising technology to improve the system capacity and spectral efficiency. By sharing the same radio resources with cellular user equipments, D2D communications can significantly enhance the overall spectral efficiency. However, it may cause interference between D2D link and cellular link. So, careful resource allocation and interference coordination between them are very important and need to be properly handled. This paper proposes a radio resource allocation scheme that decreases interference through the use of area grouping and D2D pair grouping. Simulations results are provided to verify the performance improvement of the proposed scheme in terms of the number of assigned resource blocks and computational complexity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.996-997
• /
• 2010

This paper is designed for disinfection and sterilization devices, devices based on the monitoring operation to detect the internal fault diagnosis and design a disinfection device Sterilization device monitored the internal state of the TCP / IP-based communications using Ethernet can be managed remotely, the system presented.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.606-613
• /
• 2012

In a smart grid environment, data for the usage and control of power are transmitted over an Internet protocol (IP)-based network. This data contains very sensitive information about the user or energy service provider (ESP); hence, measures must be taken to prevent data manipulation. Mutual authentication between devices, which can prevent impersonation attacks by verifying the counterpart's identity, is a necessary process for secure communication. However, it is difficult to apply existing signature-based authentication in a smart grid system because smart meters, a component of such systems, are resource-constrained devices. In this paper, we consider a smart meter and propose an efficient mutual authentication protocol. The proposed protocol uses a matrix-based homomorphic hash that can decrease the amount of computations in a smart meter. To prove this, we analyze the protocol's security and performance.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.379-380
• /
• 2006

As a result of growth sensor-enabled mobile devices such as PDA, cellular phone and other computing devices, in recent years, users can utilize the diverse digital contents everywhere and anytime. However, the interfaces of mobile applications are often unnatural due to limited resources and miniaturized input/output. Especially, users may feel this problem in some applications such as the mobile game. Therefore, Novel interaction forms have been developed in order to complement the poor user interface of the mobile device and to increase the interest for the mobile game. In this paper, we describe the demonstration of the gesture and posture input supported by an accelerometer. The application example we created are AM-Fishing game on the mobile device that employs the accelerometer as the main interaction modality. The demos show the usability for the gesture and posture interaction.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.6-11
• /
• 2015

The ESD(electrostatic discharge) protection performance of PPS(PMOS pass structure) embedded N-type silicon controlled rectifier(NSCR_PPS) device with different GPNS(Gate to Primary $N^+$ Diffusion Space) structure was discussed for high voltage I/O applications. A conventional NSCR_PPS standard device with FPW(Full P-Well) structure and non-CPS(Counter Pocket Source) implant shows typical SCR-like characteristics with low on-resistance(Ron), low snapback holding voltage(Vh) and low thermal breakdown voltage(Vtb), which may cause latch-up problem during normal operation. However, our proposed NSCR_PPS devices with modified PPW(Partial P-Well) structure and optimal CPS implant demonstrate the improved ESD protection performance as a function of GPNS variation. GPNS was a important parameter, which is satisfied design window of ESD protection device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.372-379
• /
• 2014

When a hand-held device with limited battery transmits and receives data using short-range wireless communication systems, such as WLAN(Wireless Local Area Network) or high speed WPAN(Wireless Personal Area Network), instead of mobile communication systems, the device is able to reduce the power consumption due to the reduced transmission distance. However, if there are many WLAN or high speed WPAN systems around the device, non-negligible power may be consumed by receiving and decoding the packets which have nothing to do with the device. In this paper, we propose a scheme reducing the power consumption by including physical-layer ID in WLAN or WPAN packets and avoiding unnecessary packet receptions. Also, we describe a method to determine the optimum number of physical-layer IDs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1841-1854
• /
• 1993

In this paper, the packet voice protocol for the transmission of voice signal onto ethernet is implemented in a personal computer (PC). The packet voice protocol used is a modified one from CCITT G.764 packetized voice protocol. The hardware system to facilitate the voice communication onto ethernet is divided into telephone interface, speech processing, PC interface and controllers. The software structure of the protocol is designed according to the OSI seven layer architecture and is divided into three routines : ethernet device driver, telephone interface, and processing routine of the packet voice protocol. Experiments through ethernet with telephone interface show that this packet voice communication achieves satisfactory quality when the network traffic is light.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2117-2123
• /
• 2008

This paper describes the portal system architecture of large consumers for ESP(Energy Service Provider) to provide customers with various value added services such as monitoring and controlling a wide variety of electric devices in consumer's premises for optimal energy management from both consumer side and ESP side, and the prototype implementation of 2 kinds of value added services. The architecture is composed of the device portal which gathers the information from electric devices and controls them and the consumer portal which can make ESP operate the optimal energy management with two-way communications. The demand side management and energy management functions was chosen and implemented for the prototype system as value added services. The prototype was designed to create, manage, and trace the events about services between ESP and customers.