• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.597-602
• /
• 2016

In image guided surgery, a patient registration process is a critical process for the successful operation, which is required to use pre-operative images such as CT and MRI during operation. Though several patient registration methods have been studied, we concentrate on one method that utilizes 3D surface measurement data in this paper. First, a hand-held 3D surface measurement device measures the surface of the patient, and secondly this data is matched with CT or MRI data using optimization algorithms. However, generally used ICP algorithm is very slow without a proper initial location and also suffers from local minimum problem. Usually, this problem is solved by manually providing the proper initial location before performing ICP. But, it has a disadvantage that an experience user has to perform the method and also takes a long time. In this paper, we propose a method that can accurately find the proper initial location automatically. The proposed method finds the proper initial location for ICP by converting 3D data to 2D curvature images and performing image matching. Curvature features are robust to the rotation, translation, and even some deformation. Also, the proposed method is faster than traditional methods because it performs 2D image matching instead of 3D point cloud matching.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1538-1540
• /
• 1999

For the development of electro magnetic shielding materials by use of the conductive polymer, measuring technique related to their shielding effect should be well established. For this propose, several commercialized techniques based on different conception have been well compared in order to adopt appropriate method to our materials under development and then, flanged coaxial holder type fixture device has been fabricated and tested satisfied performance has been obtained showing over 90dB in dynamic range with accuracy of +/-2dB.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.419-422
• /
• 2004

In this paper, we propose a new metric called "dynamic gamma" to quantitatively evaluate the dynamic temporal response of an LC display device. The widely-used response time and corresponding 3-D bar graphs cannot fully describe the dynamic characteristics of an LC panel [1], and using response time to compare different LC panels and assessing the dynamic features of LC panels is difficult. On the other hand, the new metric MPRT mixes an LC panel's slow temporal response with its hold-type display effect. The proposed new metric, dynamic gamma, and corresponding 2-D plots, are arguably more suitable for quantitatively characterizing the dynamic characteristics of an LC panel, so comparing two LC panels becomes easy. Furthermore, dynamic gamma has the unique property that it can be used to quantify the limitations/capabilities and to assess the effectiveness of an overdrive mechanism for a particular LCD. In the paper, two LC panels using different technology are analyzed and compared using this new metric.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.2
• /
• pp.91-98
• /
• 2010

In this paper, we looked around an effective teaching plan base on the LabVIEW by utilizing the USB type DAQ device. Moreover, we have been learning the concept of control and instrumentation engineering through theory and practice classwork in the various field of engineering, come to automation engineering as well as electricity, electronic, telecommunication and computer science. In case of the best learning to understand the concept and operate the practice, we'd like to propose the application technique to make use of the PC based on LabVIEW software with USB type DAQ devices, better than to depend upon the expensive equipment as before. As a result, we hope that this technique to be considered easily accessible to understand anyone and expect distinguished applications.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.2
• /
• pp.215-223
• /
• 2022

Objective: This study was to resolve the limitations of the experimental environment and to solve the shortcomings of the method of measuring human gait characteristics using optical measuring instruments. Design: A cross-sectional study. Methods: Fifteen healthy adults without a history of orthopedic surgery on the lower extremities for the past 6 months were participated. They were analyzed gait variables using the smart guide and the 3D image analysis at the same time, and their results were compared. Visual-3D was used to calculate the analysis variables. Results: The reliability and validity of the data according to the two measuring instruments were found to be very high; gait speed(0.85), cycle time(0.99), stride time of both feet(0.98, 0.97) stride legnth of both feet(0.86, 0.88) stride per minute of both feet(0.99, 0.96), foot speed of both feet(0.90, 0.91), step time of both feet(0.77, 0.71), step per minute(0.72, 0.74), stance time of both feet(0.96, 0.97), swing time of both feet(0.93, 0.79), double step time(0.81), initial double step time(0.84) and terminal step time(0.76). Conclusions: In the case of the smart insole, which measures human gait variables using the pressure sensor and inertial sensor inserted in the insole, the reliability and validity of the measured data were found to be very high. It can be used as a device to replace 3D image analysis when measuring pathological gait.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.103-108
• /
• 2009

Purpose: Although there are many reports on the development of paranasal sinuses, few studies were performed with respect to the frontal sinus with 3D CT, especially in Korean children. In this study, we evaluated the normal development of frontal sinus in Korean children with 3D CT imaging. Methods: A total of 301 patients under the age of 20 were reviewed retrospectively. Maximal AP (anteroposterior) length, height and width were measured with the aid of computer device. The volume of frontal sinus was also evaluated. Results: At the age of more than 4, the pneumatization of frontal sinus was detected. Frontal sinus developed continuously and was observed in almost every children at the age of more than 17. The AP length, height, width and volume of frontal sinus were enlarged continuously until the age of 20. And the maximal growth of frontal sinus was observed at puberty. The width and volume of frontal sinus showed high correlation coefficient (r=0.8) relative to height or AP distance. Conclusion: The results of this study may be helpful in the comprehension of normal development of frontal sinus in Korean children.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.7
• /
• pp.470-480
• /
• 2015

As the railway noise guideline of the Ministry of Environment after 2017 is strictly enforced, the noise level at stationary condition of urban railway is demanding the reduction about 2 dB(A). And the noise level at running condition is reduced by 6 dB(A) at 80 km/h. Therefore, the devices that causes noise shall arrange for the improvement plan of noise reduction for each device. In this paper, we carried out a technical review of the driving gear used to drive the vehicle from a variety of noise-induced equipment of a urban railway. Analyze the causes of the current noise levels and noise cause about the driving gear used in current urban railway and this study analyzes the noise level and noise cause the drive gear being used in the current urban railway. Finally, in this paper proposes a scheme for reducing the noise that can be designed to reduce the noise with considering the noise cause analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.6
• /
• pp.572-581
• /
• 2001

A heat pipe heat sink device which is to evacuate maximum heat of about 1800W from a powersemiconductor was designed and manufactured One set of cooling device os composed of an Aluminum block (130${\times}$160${\times}$35mm) 4 PFC heat pipes $(d_0 22.23mm)$ and 126 Aluminium fins (250${\times}$58${\times}$0.8mm) Experimental data obtained at a power of 1~2kW revealed that the total thermal resistance of the device varied 0.02~0.018$^{\circ}C$/W along with increasing air velocity from 2m/s to 3 m/s. The result represented a good satisfaction of requirement condition to maintain temperature rise of semiconductor lowe that $40^{\circ}C$ at 1800W and air velocity of 3 m/s Some important resistance such as convective resistances at both fins and heat pipes showed good agreement between mathematical predictions and measurement data.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.88-92
• /
• 2020

Thermal effects in bulk and SOI FinFETs are briefly reviewed herein. Different techniques to measure these thermal effects are studied in detail. Self-heating effects show a strong dependency on geometrical parameters of the device, thereby affecting the reliability and performance of FinFETs. Mobility degradation leads to 7% higher current in bulk FinFETs than in SOI FinFETs. The lower thermal conductivity of SiO₂ and higher current densities due to a reduction in device dimensions are the potential reasons behind this degradation. A comparison of both bulk and SOI FinFETs shows that the thermal effects are more dominant in bulk FinFETs as they dissipate more heat because of their lower lattice temperature. However, these thermal effects can be minimized by integrating 2D materials along with high thermal conductive dielectrics into the FinFET device structure.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.761-768
• /
• 1995

Double layered BaTiO3 thin films with high dielectric constant as well as good insulating property were prepared for the application to low voltage driving thin film electroluminescent (TFEL) device. BaTiO3 thin films were formed by rf-magnetron sputtering technique. Amorphous and polycrystalline BaTiO3 thin films were deposited at the substrate temperatures of room temperature and 55$0^{\circ}C$, respectively. Two kinds of films prepared under these conditions showed high resistivity and high dielectric constant. The figure of merit (=$\varepsilon$r$\times$Eb.d) of polycrystalline BaTiO3 thin film was very high (8.43$\mu$C/$\textrm{cm}^2$). The polycrystalline BaTiO3 showed a substantial amount of leakage current (I), under the high electric field above 0.5 MV/cm. The double layered BaTiO3 thin film, i.e., amorphous BaTiO3 layer coated polycrystalline BaTiO3 thin film, was prepared by the new stacking method and showed very good dielectric and insulating properties. It showed a high dielectric constant fo 95 and leakage current density of 25 nA/$\textrm{cm}^2$ (0.3MV/cm) with the figure of merit of 20$\mu$C/$\textrm{cm}^2$. The leakage current density in the double layered BaTiO3 was much smaller than that in polycrystalline BaTiO3 under the high electric field. The saturated brightness of the devices using double layered BaTiO3 was about 220cd/$m^2$. Threshold voltage of TFEL devices fabricated on double layered BaTiO3 decreased by 50V compared to the EL devices fabricated on amorphous BaTiO3.