• Korean Journal of Clinical Pharmacy
• /
• v.22 no.1
• /
• pp.30-40
• /
• 2012

In Korea, elderly population aged 65 and older are about 5.0% and 10.7% in 1990 and 2009, respectively. Since elderly people may experience physiologic changes with aging and their pharmacodynamic and pharmcokinetic parameters also have been undergone changes, several adverse drug reactions can occur more frequently than young people. Especially, neuropsychiatric adverse drug reactions such as delirium and drowsiness endanger elderly patients more. The purpose of this study is to evaluate the outpatient prescriptions using drug causing delirium and drowsiness in elderly patients aged 65 and older. We retrospectively reviewed prescriptions for elderly patients collected from four community pharmacies from January 2nd to February 1st, 2010. One pharmacy was located closed to a general hospital, and others were located closed to a internal medicine or an ENT clinic. The each number of the collected prescriptions was followings; Group A (n=496) from internal medicine department of a general hospital; Group B (n=44) from ENT department of general hospital; Group C (n=144) from internal medicine clinic; Group D (n=110) from ENT clinic. In result, in Group A, the average number of prescribed drugs causing delirium or drowsiness per Rx was 2.38 In Group B, the average number of prescribed drugs causing delirium or drowsiness per Rx was 2.09 In Group C, the average number of prescribed drugs causing delirium or drowsiness per Rx was 2.51. In Group D, the average number of prescribed drugs causing delirium or drowsiness per Rx was 2.72. Especially, in Group D, the percentage of prescription that drugs causing delirium or drowsiness per Rx prescribed more than 3 is 52.73% In all the 4 groups, over the 60% of drugs causing delirium and/or drowsiness per prescription of elderly patients were prescribed. It means elderly patients take 2 drugs causing delirium and/or drowsiness among 3 drugs, which is very serious. Frequently prescribed drugs causing delirium and/or drowsiness were followings; GI agents, antitussives & expectorants, histamine H1 antagonist, analgesics, antibiotics. Among these drugs, GI agents was high raking in all the 4 groups, and pharmacists should caution elderly patients when counseling. In the internal medicine groups (Group A,C), drugs concerning chronic diseases were prescribed frequently. In conclusion, pharmacist's role is important. Pharmacists are well informed of the drugs causing delirium or drowsiness and it is important to explain about ADRs slowly and easily to the elderly patients that receive drugs causing delirium or drowsiness. And institutional device is needed. For example, when doctors prescribe drugs for the elderly patients, message is needed that supply some informations about drugs causing delirium or drowsiness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.298-298
• /
• 2014

Quantum dot infrared photodetectors (QDIPs) based on Stranski-Krastanov (SK) quantum dots (QDs) have been widely explored for improved device performance using various designs of heterostructures. However, one of the biggest limitations of this approach is the "pancake" shape of the dot, with a base of 20-30 nm and a height of 4-6 nm. This limits the 3D confinement in the quantum dot and reduces the ratio of normal incidence absorption to the off-axis absorption. One of the alternative growth modes to the formation of SK QDs is a sub-monolayer (SML) deposition technique, which can achieve a much higher density, smaller size, better uniformity, and has no wetting layer as compared to the SK growth mode. Due to the advantages of SML-QDs, the SML-QDIP design has attractive features such as increased normal incidence absorption, strong in-plane quantum confinement, and narrow spectral wavelength detection as compared with SK-DWELL. In this study, we report on the improved device performance of InAs/InGaAs SML-QDIP with different composition of $Al_xGa1-_xAs$ barrier. Two SML-QDIPs (x=0.07 for sample A and x=0.20 for sample B) are grown with the 4 stacks 0.3 ML InAs. It is investigated that sample A with a confinement-enhanced (CE) $Al_{0.22}Ga_{0.78}As$ barrier had a single peak at $7.8{\mu}m$ at 77 K. However, sample B with an $Al_{0.20}Ga_{0.80}As$ barrier had three peaks at (${\sim}3.5{\mu}m$, ${\sim}5{\mu}m$, ${\sim}7{\mu}m$) due to various quantum confined transitions. The measured peak responsivities (see Fig) are ~0.45 A/W (sample A, at $7.8{\mu}m$, $V_b=-0.4V$ bias) and ~1.3 A/W (sample B, at $7{\mu}m$, $V_b=-1.5V$ bias). At 77 K, sample A and B had a detectivity of $1.2{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-0.4V$ bias) and $5.4{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-1.5V$ bias), respectively. It is obvious that the higher $D^*$ of sample B (than sample A) is mainly due to the low dark current and high responsivity.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.163-168
• /
• 2010

This paper presents the practical implementation of an over-temperature protection system for power semiconductor devices. In the proposed system, temperature variation is provided with just using $R_{ds(on)}$ characteristics of power MOSFET, while extra device such as a temperature sensor or an over-temperature detection transistor is needed to monitor the temperature in the conventional method. The proposed protection technique is experimentally tested on IRF840 power MOSFET. The PIC microcontroller PIC16F877A is used for the implementation of the proposed protection algorithm. The built-in 10-bit A/D converter is utilized for detecting voltage variance between a drain and a source of IRF840. The induced temperature-resistance relationship based on the measured drain-source voltage, supplies a gate signal to the power MOSFET. If detected temperature's voltage exceeds any a protection temperature's voltage, the microcontroller removes the trigger signal from the power MOSFET. These test results showed satisfactory performances of the proposed protection system in term of accuracy within 1.5%.

• Journal of Korea Game Society
• /
• v.15 no.3
• /
• pp.7-18
• /
• 2015

This research examined the effects of user experience in driving simulation game between using general monitor and 3D virtual reality device, Oculus Rift DK2. We compared the difference of user experience such as presence, flow and arousal by gaming environment. We also tested the effects of virtual reality on driving attitude, emotional pleasure and satisfaction. 100 beginner drivers with a driver's license participated in the experiment of two modes of gaming environment. As a result, all the three user experiences were proved to be significantly higher in VR game play than general monitor game. Also driving attitude, emotional pleasure and satisfaction showed a significant difference in virtual reality. This study makes a theoretical and practical contribution to the application of the next virtual reality game with a special function.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.100-105
• /
• 2009

A watermarking for copyright protection of digital contents for broadcasting have to be made for a real-time system. In this paper, we propose a real-time video watermarking chip and system which is hardware based watermark embedding system of SD/HD video. Our chip is implemented by FPGA which is STRATIX device from ALTERA, and our system is implemented by GS1560A and GS1532 devices from GENNUM for HD/SD video signal processing. There was little visual artifact due to watermarking in subjective quality evaluation between the original video and the watermarked one. Embedded watermark was all extracted after a robustness test called natural video attacks such as A/D conversion and MPEG compression. Our implemented watermarking hardware system can be useful in movie production and broadcasting companies that requires real-time based copyright protection system.

• Imaging Science in Dentistry
• /
• v.51 no.1
• /
• pp.27-34
• /
• 2021

Purpose: This study was performed to compare the ability of limited- and large-volume cone-beam computed tomography (CBCT) to display isthmuses in the apical root canals of mandibular molars. Materials and Methods: Forty human mandibular first molars with isthmuses in the apical 3 mm of mesial roots were scanned by micro-computed tomography (micro-CT), and their thickness, area, and length were recorded. The samples were examined using 2 CBCT systems, using the smallest voxels and field of view available for each device. The Mann-Whitney, Friedman, and Dunn multiple comparison tests were performed (α=0.05). Results: The 3D Accuitomo 170 and i-Cat devices detected 77.5% and 75.0% of isthmuses, respectively (P>0.05). For length measurements, there were significant differences between micro-CT and both 3D Accuitomo 170 and i-Cat(P<0.05). Conclusion: Both CBCT systems performed similarly and did not detect isthmuses in the apical third in some cases. CBCT still does not equal the performance of micro-CT in isthmus detection, but it is nonetheless a valuable tool in endodontic practice.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1217-1222
• /
• 2004

This paper describes the development of tele-robotic interface for the hot-line maintenance robot system. One of main issues in designing human-robot interface for the hot-line maintenance robot system is to plan the control procedure for each part of the robotic system. Another issue is that the actual degree of freedom (DOF) in the hot-line maintenance robot system is much greater than that of available control devices such as joysticks and gloves in the remote-cabin. For this purpose, a virtual simulator, which includes the virtual hot-line maintenance robot system and the environment, is developed in the 3D environment using CAD data. It is assumed that the control operation is done in the remote cabin and the overall work process is observed using the main-camera with 2 DOFs. For the input device, two joysticks, one pedal, two data gloves, and a Head Mounted Display (HMD) with tracker sensor were used. The interface is developed for each control mode. Designed human-interface system is operated using high-level control commands which are intuitive and easy to understand without any special training.

• Corrosion Science and Technology
• /
• v.19 no.5
• /
• pp.239-249
• /
• 2020

The characteristics of cavitation-erosion damage with changes in the amplitude of 5052-O aluminum alloy for ships were investigated in a seawater environment. In the cavitation-erosion experiment, the cavitation environment was created using a vibration-generating device with a piezo-electric effect. The amplitudes of 5 ㎛, 10 ㎛, and 30 ㎛ were created by changing the geometric shape of the cavitation horn. The resistance characteristics of cavitation-erosion damage were evaluated by weight loss and pitting area. The damaged surface was analyzed using scanning electron microscopy (SEM) and 3D optical microscopy. As the amplitude increased, the amount of damage and the area of the damaged surface increased, and the damage was concentrated at the center and edge of the specimen. The pit was created after the initial incubation period with increasing experimental time, and then the pits were merged to grow and propagate into craters, and eventually, the surface was detached and damaged. The cavitation-erosion damage after 30 minutes with amplitude of 10 ㎛ and 30 ㎛ was 1.48 and 2.21 times compared to 5 ㎛, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1763-1768
• /
• 2016

This paper presents the electrical characteristics of the gallium nitride (GaN) current aperture vertical electron transistor (CAVET) by using two-dimensional (2-D) technology computer-aided design (TCAD) simulations. The CAVETs are considered as the alternative device due to their high breakdown voltage and high integration density in the high-power applications. The optimized design for the CAVET focused on the electrical performances according to the different gate-source length ($L_{GS}$) and aperture length ($L_{AP}$). We analyze DC and RF parameters inducing on-state current ($I_{on}$), threshold voltage ($V_t$), breakdown voltage ($V_B$), transconductance ($g_m$), gate capacitance ($C_{gg}$), cut-off frequency ($f_T$), and maximum oscillation frequency ($f_{max}$).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.103-110
• /
• 2016

A performance analysis program of a disk type fluidic valve was developed to predict a chamber pressure and a response time. A parametric study of this device was performed by using scattering plot method. A sensitivity of Mach number at a nozzle outlet showed the highest value about a outlet diameter of nozzle. An inlet flow rate is the most important parameter to design the fluidic valve because it has high sensitivity value both a outlet velocity and a response time.