• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.42-50
• /
• 2007

This paper presents design methods for dual-frequency(2.4/5.8GHz) active receiving antennas. The proposed active receiving antennas are designed to interconnect the output port of a wideband antenna to the input port of an active device of High Electron Mobility Transistor directly and to receive RF signals of 2.4GHz and 5.2GHz simultaneously where the impedance matching conditions are optimized by adjusting the length of $1/20{\lambda}_0$(@5.8GHz) CPW transmission line in the planar antenna The bandwidth of implemented dual-frequency active receiving antennas is measured in the range of 2.0GHz to 3.1GHz and 5.25GHz to 5.9GHz. Gains are measured of 17.0dB at 2.4GHz and 15.0dB at 5.2GHz. The measured noise figure is 1.5dB at operating frequencies.

• Journal of Digital Contents Society
• /
• v.8 no.2
• /
• pp.245-253
• /
• 2007

Recently, the use and application of computer graphics in the mobile and ubiquitous environment are growing. Real-time rendering and modeling for computer graphics are due to system performance, there're lots of limitation in lower system such as PDA and cell phone etc. Therefore, we suggested the intelligent Serving Rendering Middleware which is to provide adaptation service of computer graphics contents fit to user's environment real-time whatever environment the users are in. The Service Rendering Middleware needs multi-level configurations and applications, so, in this paper we propose multi-level algorithm to decide adaptation levels are deal with separately according to device performance.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.5
• /
• pp.211-217
• /
• 2001

In this paper, we have developed the 6 DOF force display system to be based on the single PC. The system is composed of the force display device, the force reflecting rendering algorithm and the high-speed controller. The previous systems had a problem, that must adopt high performance workstation or 2-PC in order to control the graphics speedily and stably. In this paper, it is possible to improve the problem as to develop its exclusive controller and new rendering algorithm. The proposed new rendering algorithm is based on the Proxy algorithm, which can convert information of the position, the velocity, and the haptic information into the force-data. Especially, as to use the proxy algorithm, we can construct dynamical virtual-environment with the elasticity, the viscosity, the mass, and the friction force. As the result of the experiment, we found that our system has much superior characteristics than some other haptic interfaces, because it can control of 30,000 polygon model constructed virtual object with 1[kHz] haptic interrupt cycle and 20[Hz] graphic interrupt cycle in the single PC based system.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.83-93
• /
• 2008

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. Current direct seeding machines for rice in Korea drill irregularly under various operating conditions. This study was conducted to develope a precision seeder which enables the accurate, even-spaced in row placement of rice seeds at uniform depths of 3-4 cm on dry paddy. Design, construction and performance evaluation of the precision seeder were carried out. The tractor rear-mounted type 8-rows precision seeder which performs seeding in addition to fertilizing, ditching, and rotary tilling works on dry paddy was developed. Main components of the seeder were ditcher and leveller, rotary tiller, powered roller type furrow opener, seeding device, powered roller type furrow covering and firming device, hydraulic unit, seeding speed control system, power transmission system, hitch and frame. Ditching, furrow opening, and seed covering and firming performances were good and seeding depths of 2-4 cm could be maintained. Planting accuracies and planting precisions were within 13.6%, and 31.2%, respectively, for planting space of 15 cm, and seeding velocity of 0.5 m/s. These mean variations of average planting space were within 2.1 cm, and 90% of seeds in a hill were seeded within 4.7 cm of hill length, respectively. Error ratios between setting planting space and measured average planting space were shown within 6.7%. Therefore the seeder showed good planting performance up to seeding velocity of 0.5 m/s in field tests. And field capacity of the seeder was about 0.28 ha/hour.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.89-94
• /
• 2021

The mechanical reliability of flexible devices has become a major concern on their commercialization, where the importance of reliable bonding is highlighted. In terms of component materials' properties, it is important to consider thermal damage of polymer substrates that occupy large area of the flexible device. Therefore, room temperature bonding process is highly advantageous for implementing flexible device assemblies with mechanical reliability. Conventional epoxy resins for the bonding still require curing at high temperatures. Even after the curing procedure, the bonding joint loses flexibility and exhibits poor fatigue durability. To solve this problems, low-temperature and adhesive-free bonding are required. In this work, we develop a room temperature bonding process for polymer substrates using carbon nanotube heated by microwave irradiations. After depositing multiple-wall carbon nanotubes (MWNTs) on PET polymer substrates, they are heated locally with by microwave while the entire bonding specimen maintains room temperature and the heating induces mechanical entanglement of CNT-PET. The room temperature bonding was conducted for a PET/CNT/PET specimen at 600 watt of microwave power for 10 seconds. Thickness of the CNT bonding joint was very thin that it obtains flexibility as well. In order to evaluate the mechanical reliability of the joint specimen, we performed lap shear test, three-point bending test, and dynamic bending test, and confirmed excellent joint strength, flexibility, and bending durability from each test.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.181-186
• /
• 2008

2,5-Di-(2'-hydroxyethoxy)-4'-nitrostilbene (3) was prepared and polycondensed with terephthaloyl chloride, adipoyl chloride, and sebacoyl chloride to yield novel T-type polyesters (4-6) containing the NLO-chromophores dioxynitrostilbenyl groups, which constituted parts of the polymer backbones. Polymers 4-6 are soluble in common organic solvents such as acetone and N,N-dimethylformamide. They showed thermal stability up to 260 oC in thermogravimetric analysis with glass-transition temperatures obtained from differential scanning calorimetry in the range 90-95 oC. The second harmonic generation (SHG) coefficients (d33) of poled polymer films at the 1064 nm fundamental wavelength were around 1.42 ´ 10-9 esu. The dipole alignment exhibited high thermal stability up to 5 oC higher than glass-transition temperature (Tg), and there was no SHG decay below 100 oC due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.2
• /
• pp.68-71
• /
• 2012

The electrospinning technique is a revolutionary template-catalyst-free method that can generate 1D nanostructure with the tunability and the potential for the mass production. This approach received a great deal of attention due to its ability to give direct pathways for electrical current and has been utilized in various electronic applications. However, the delamination of inorganic electrospun film has prevented the intense utilization due to the thermal expansion/contraction during the calcination. In this study, we propose an electrical grounding method for transparent conducting oxide and electrospun nanowires to enhance the adhesion after the calcination. Then, we examined the potential of the technique on ZnO based dye-sensitized solar cells.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.760-762
• /
• 2000

Hybrid type LPM can be widely applied in the precise position controlled devic because precise linear motion can be directly obtained by the simple control circuit without backlash in the rotary-type stepping motor. Also, LPM can increase the Position resolution, which was limited by mechanical manufacturing limit and characteristic of magnetic material. using micro-step drive method to decrease the noise and vibration further. Especially, Double-side LPM may be replaced the solenoid as the valve driving device without difficulty and give full play to control the valve accurately. Hence, In this paper, magnetic circuit of double-side LPM was confirmed and static thrust force curve according to the relative displacement between stator and mover, was analyzed by the two dimensional finite element method. From this results, we can suppose the excitation current to be controlled optimally.

• Journal of Navigation and Port Research
• /
• v.43 no.5
• /
• pp.281-288
• /
• 2019

In this paper, we implemented a mobile application of location-based augmented reality that combines self-sensing technology and various safety information using technological advancements of the smartphone. Vessel navigation is a suitable area for augmented reality because it requires accurate knowledge of the distance and location of destinations, danger zones, AtoN, and adjacent vessels. Current smartphone applications only provide 2D images and location information. Such applications do not include information about the surrounding environment, and as a result, they can only function using their own sensing information and surrounding information into a location-based augmented reality. If you provide a variety of sensor information embedded in the smartphone to 'BadaGO', the implemented application through this study, 'BadaGO' can provide safe navigation information to the user device in real time with a variety of its own formed information. The user has a high practicality and applicability of a small ship that is supplied with safe navigation information in a changing marine environment only by providing information through the application on the smartphone.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.149-150
• /
• 2006

A ZnO nanowire-based FET is fabricated m this study on a flexible substrate of PES. For the flat and bent flexible substrates, the current ($I_D$) versus drain-source bias voltage ($V_{DS}$) and $I_D$ versus gate voltage ($V_G$) results are compared. The flat band was Ion/Ioff ratio of ${\sim}10^7$, a transconductance of 179 nS and a mobility of ~10.104 cm2/Vs at $V_{DS}$ =1 V. Also bent to a radius curvature of 0.15cm and experienced by an approximately strain of 0.77 % are exhibited an Ion/Ioff ratio of ${\sim}10^7$, a transconductance of ~179 nS and a mobility of ${\sim}10.10 cm^2/Vs$ at $V_{DS}$ = 1V. The electrical characteristics of the FET are not changed very much. although the large strain is given on the device m the bent state.