• 한국정보전자통신기술학회논문지
• /
• 제10권2호
• /
• pp.161-167
• /
• 2017

본 논문에서는 효율적인 손목시계형 PPG 측정 장치의 구현에 관하여 연구하였다. PPG는 반사형 또는 투과형으로 측정이 가능하며, 일반적으로 손목시계의 형태의 PPG 측정 장치는 반사형으로 구현되기 때문에 동잡음에 취약하다는 단점이 있다. 또한 반사형의 경우 한쪽 손을 고정한 상태에서 다른 손을 사용하여 측정을 해야 하기 때문에 활동성에도 제약이 따른다. 본 논문에서는 기존에 개발된 장치에 클립형의 투과형 센서를 추가하여 손가락에 고정시킴으로써 측정 시 움직임을 최소화하도록 동잡음에 강건하도록 하였고, 한 손으로 측정이 가능할 뿐만 아니라 탈부착이 가능하도록 구현하여 활동성에 영향이 없도록 하였다. 제안된 장치는 측정된 신호를 실시간으로 전송이 가능하기 때문에 스마트 헬스케어 분야에 적합하며 제안된 장치의 성능을 판단하기 위해 기존의 장치와 같은 조건하에서의 측정된 신호를 비교 실험하였다. 실제 심박수 측정이 가능한 파형을 확인한 결과, 제안된 측정 장치는 기존의 장치에 비해 20%의 성능향상이 있음을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2011-2014
• /
• 2011

A "failure point informing device" is that if a accident of short or ground occurs in electric railway it inform us of the distance to accident point. SeoulMetro, KRRI, 2ISYS have developed this device and installed in line no.4 substation Iy-Chon, Sam-Gakgi to test its performance. A line resistance will be measured to test this device in November.

• 한국소음진동공학회논문집
• /
• 제23권2호
• /
• pp.160-166
• /
• 2013

This paper proposes a driver supportive device with haptic cue function which can be applicable for vehicles adopting manual transmission system to transmit gear-shifting information to a driver by kinesthetic forces. This haptic cue function is implemented on accelerator pedal by utilizing magnetorheological(MR) fluid and clutch mechanism. In order to achieve this goal, an MR clutch mechanism is devised to be capable of rotary motion of accelerator pedal. The proposed MR clutch is then optimally designed and manufactured under consideration of spatial limitation of vehicles. After transmission torque is experimentally evaluated according to field intensity. The manufactured MR clutch is integrated with accelerator pedal and electric motor to establish the haptic cue device. Control performances are experimentally evaluated via a simple feed-forward control algorithm.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.31-37
• /
• 2015

Recently, mobile phones have become necessary tools for everyday life. In this study, a device that can serve as a separation between a touch panel and an LCD module in a mobile phone was devised for mass repair processes at a smaill business. We used a wire cutting method to separate the bonding plate area between the modules. The device is composed of DC motors and stepping motors that can deliver a precise cutting motion. The motor control system is connected by individual control modules to a CAN network. The developed device showed excellent performance at high temperature conditions.

• 제어로봇시스템학회논문지
• /
• 제9권5호
• /
• pp.354-360
• /
• 2003

For the convenient use of high performance microprocessor in motor control, peripheral devices are needed for converting its control signals to compatible ones for motor drive. Customized devices are not plentiful far these purposes and their functions do not usually satisfied designers specification. The designers used to implement these functions on FPGA or CPLD using hardware description language. Then, in this case unessential programs are needed for control the peripherals. In this paper, a unified device model that links peripheral devices, including especially the pulse width modulation controller and the quadrature encoder interface device, to an interrupt controller is proposed. Advanced functions of peripherals could be achieved by this model and unessential programs can be simplified. Block diagrams and flowcharts are presented to illustrate the advanced functions. This unified device was designed using VHDL. The simulation results were presented to demonstrate the effectiveness of the proposed scheme.

• IEIE Transactions on Smart Processing and Computing
• /
• 제2권2호
• /
• pp.67-76
• /
• 2013

Under an imperfect channel estimation, a Device-to-Device (D2D) communication framework based on MIMO relay technology is presented. The model consists of a D2D pair equipped with M antennas and a relay equipped with N antennas as well as a cellular user equipped with M antennas. The outage probability under different relaying protocols (i.e. AF and DF protocol) with and without considering a direct link was derived. The actual and theoretical outage probability of the five links under different antenna numbers was emulated. The number of user antennas and channel estimation error was analyzed carefully to determine their impact on the outage probability of a system. The simulation verified the theory analyses and the results showed that MIMO relaying improves the D2D communication system performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.711-713
• /
• 2004

In the past time, the protection relay did only a protection function. Currently, its upgraded device i.e. IED(Intelligent Electric Device) has been designed to protect, control, and monitor the whole power system automatically. Also the device is desired to successfully measure important elements of the power system. This paper considers design method of a digital protection IED with a function of measuring various elements and a communication function. The protection IED is composed of the specific function modules that are signal process module, communication module, input/output module and main control module. A signal process module use a DSP processor for analysis of input signal. Main control module use a embedded processor, Xscale, that has an ARM Core. The communication protocol uses IEC61850 protocol that becomes standard in the future. The protection IED is able to process mass information with high-performance processor. As each function module is designed individually, the reliability of the device can be enhanced.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.368-371
• /
• 2008

Cellulose based Electroactive Paper (EAPap) has been developed as a new smart material due to its advantages of piezoelectricity, large displacement, low power consumption, low cost and flexibility. EAPap can be used fur a surface acoustic wave (SAW) device using the piezoelectric property of EAPap, resulting in the cost effective and flexible SAW device. In this paper, inter digit transducer (IDT) structure using lift-off technique with a finger gap of $10{\mu}m$ was used for micro fabrication of the cellulose EAPap SAW devices. The performance of IDT patterned SAW device was characterized by a Network Analyzer. The feasibility of cellulose EAPap as a potential acoustic device was presented and explained.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1946-1950
• /
• 2011

This paper deals with an input device without the touch. The existing touch screens have some problems such as the week durability by frequent contact and the high cost by complex hardware configuration. In this paper, a non-touch input device is proposed to overcome these problems. The proposed method uses a skin color generated by the HCbCr color model and a hand region obtained by the labeling technique. In Addition, the skeleton model is employed to improve the recognition performance of the hand motion. Finally, the experiment results show the applicability of the proposed method.

• Journal of information and communication convergence engineering
• /
• 제10권1호
• /
• pp.91-95
• /
• 2012

The photoplethysmography (PPG) signal measured from a mobile healthcare device contains various motion artifacts occurring from a patient’s movements. Recently, to reject the motion artifacts, the method of using an acceleration sensor was suggested, but such sensors are very expensive. Therefore, this study deals with a novel sensor device to replace the acceleration sensor, and evaluated the performance of the proposed sensor experimentally. In the results of the experiments, it is shown that the proposed sensor device can reconstruct the PPG signal despite the occurrence of motion artifacts, and also that the variation rate in heart rate analysis was 1.22%. According to the experimental results, the proposed method can be applied to design a low-cost device.