• Advances in nano research
• /
• v.10 no.1
• /
• pp.91-99
• /
• 2021

Silicene is an emerging two-dimensional (2D) semiconductor material which has been envisaged to be compatible with conventional silicon technology. This paper presents a theoretical study of uniformly doped silicene with aluminium (AlSi3) Field-Effect Transistor (FET) along with the benchmark of device performance metrics with other 2D materials. The simulations are carried out by employing nearest neighbour tight-binding approach and top-of-the-barrier ballistic nanotransistor model. Further investigations on the effects of the operating temperature and oxide thickness to the device performance metrics of AlSi3 FET are also discussed. The simulation results demonstrate that the proposed AlSi3 FET can achieve on-to-off current ratio up to the order of seven and subthreshold swing of 67.6 mV/dec within the ballistic performance limit at room temperature. The simulation results of AlSi3 FET are benchmarked with FETs based on other competitive 2D materials such as silicene, graphene, phosphorene and molybdenum disulphide.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.67-73
• /
• 2010

In this study, a camber angle generating mechanism for rear suspension is suggested. An experimental device is implemented and tested. A full vehicle model with camber angle generating device by using ADAMS/Car is modeled. Rear left wheel and rear right wheel have 5 different camber angles in the simulations, respectively. Step steer and pulse steer simulations are carried out for investigating the effects of vehicle handling performance due to camber angle control of rear suspension. According to the results, the camber angle of rear suspension affects the vehicle handling performance during both simulations. Therefore, when the vehicle makes the right turn or left turn, left and right wheel should have the proper orientation for improving the handling performance, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.23-29
• /
• 2011

In this study, a camber angle generating mechanism for front and rear suspension is suggested. An experimental device is implemented and tested. A full vehicle model with camber angle generating device by using ADAMS/Car is modeled. Step steer simulations are carried out for investigating the effects of vehicle handling performance due to camber angle change of front and rear wheel. According to results, the camber angle of rear suspension affects the vehicle handling performance during both simulations. Therefore, when the vehicle makes the right turn or left turn, left and right wheel of front and rear suspension should have the proper orientation for improving the handling performance, respectively.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.3
• /
• pp.100-106
• /
• 2009

As an effort to prevent environmental problems caused by ozone depletion and global warming, alternative refrigerants are being developed, and one of the candidates is carbon dioxide. To overcome slightly low efficiency of $CO_2$ refrigeration system, air-conditioning cycle using an ejector was suggested. Ejector compensates throttling loss in an expansion device by reducing compression work. In this study, the ejector refrigeration cycle using $CO_2$ as a refrigerant is investigated to understand the effect of the mixing section diameter and refrigerant charge amount on the performance. If mixing section diameter is too large or too small, either cases show low performance. The optimum refrigerant charge amount which gives the best performance is found for standard operating conditions. The air-conditioning cycle was analyzed for several operating conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.194-197
• /
• 2006

One novel electrode-architecture has been adapted to fabricate transparent OTFTs. The device has more than 70% transmittance, yet reminds high performance. Furthermore, we also use transfer line method to prove that the device performance enhancement indeed contributes from the reduction of the contact resistances. It is anticipated that the transparent OTFTs would be very suitable to be the driving circuits for liquid crystal displays (LCDs).

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.36-38
• /
• 2000

An optoelectronic database filter chip for high performance database computers and applications is proposed. The proposed device is designed to perform the selection and projection operations of relational database operation on-the-fly in page-parallel manner to increase the overall performance of a database system. The device utilizes CMOS smart pixel array consists of detector and combinational logic circuit to perform the selection and projection operation.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.115-122
• /
• 2001

An impact-type seed-metering device was developed for the planting of rice-pellets. In this study, new design of pellet-metering device focused on simplicity and precision seeding for the planting of rice-seed pellets. In addition of seed-metering device, several devices were also developed such as seed-guiding device, seed-supplying tube and furrow opener for precision pellet planting. Field test was conducted to estimate the planting performance of the developed metering device. As a cam rotates, the impact bar of the metering device pushes a rice-seed pellet so that the seed can be discharged from the seed-supplying tube in the impact-type seed-metering device. Results of the tests showed that mean seeding spacing was 12cm at the traveling speed of 1.0m/s, corresponding to a target spacing for planting of rice-seed pellets. Also, both miss-seeded rate and damaged-seed rate were less than 2.0%, indicating acceptable levels for the precision planting. The developed mechanism of the impact-type metering device can be directly applied to the design of metering devices for the precision pellet planting of other crops.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.237-241
• /
• 2005

We present a device model for organic light emitting diodes(OLEDs) which includes charge injection, transport, recombination, and space charge effects in the organic materials. The model can describe both injection limited and space charge limited current flow and the transition between them. Calculated device current, light output, and quantum and power efficiency are presented for different cases of material and device parameters and demonstrate the improvements in device performance in bilayer devices. These results are interpreted using the calculated spatial variation of the electric field, charge density and recombination rate density in the device. We find that efficient OLEDs are possible for a proper choice of organic materials and contact parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.118.1-118
• /
• 2002

Recent trends in internet access to the device network require that information be provided from anywhere in the enterprise. One then needs to integrate both device network protocol and data network protocol to realize Virtual Device Network (VDN). Interoperability between devices and equipments is essential to enhance the quality and the performance of VDN. LonWorks technology is incorporated as device network protocol for interoperability. VDN integrating both device network and data network has varying time delay. Inherent varying time delay of VDN can significantly degrade the reliability of Distributed Control System. This study investigates the transmission characteristics of VDN and s...

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1553-1558
• /
• 2000

The development of recent computer and communication technology has changed Automation System using communication network, and the new USB substituted with Serial Communication is already developed and now popular. In this paper, High speed data transfer system design using USB interface and communication application simulated for the situation is introduced. Base on USB, we can use additive function efficiently coped with former field device. The 'Winsock Connection USB Ternimal,' designed for hardware simulation, control the field device connected by USB, and provide the way for remote control of field device by Telnet connection through TCP/IP. That theorem can guarantee controlling direct input dta of user, and acuate function of field device using USB Packet Transmission. As a result of amy research, this communication application system identified good operation of field device with those of former field device. Another result of the experiment of hardware operation, we obtained accomplishment that the sufficient bandwidth guarantee of USB has high speed and high performance, and reduce the occupancy of system.