• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06a
• /
• pp.358-360
• /
• 2006

임베디드 장치나 모바일 같은 기기들은 자바 환경을 적용하기 위해 SUN사의 CLDC(Connected Limited Device Configuration)에서 정의하고 있는 KVM(K Virtual Machine)을 탑재하여 사용하게 된다. 자바의 GUI를 제공하기 위해서 CLDC는 MIDP(Mobile Information Device Profile)에서 명세하고 있는 GUI 표준 API를 사용하게 되는데, 이는 운영체제의 네이티브(Native) 함수와의 상호 연동에 의해 동작한다. 이에 본 논문에서는 실시간 운영체제인 $UbiFOS^{TM}$ 기반의 KVM GUI를 구현하는데 있어 그래픽 윈도우 시스템과 GUI API와의 상호 동작을 위한 네이티브 함수와 이벤트 처리에 대해 설계 및 구현한 내용을 기술한다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.45-50
• /
• 2008

Molecular flows inside a guide block in the OLED(organic luminescent emitting device) deposition process have been simulated using DSMC(direct simulation Monte Carlo) method. Because the organic materials are evaporated under vacuum, molecules flow at a high Knudsen number of the free molecular regime, where the continuum mechanics is not valid. A guide block is designed as a part of the linear cell source to transport the evaporated materials to a deposition chamber, When solving the flows, the inlet boundary condition is proved to affect significantly the whole flow pattern. Thus, it is proposed that the pressure should be specified at the inlet. From the analysis of the density distributions at the nozzle exit of the guide block, it is shown that the longer nozzle can emit molecules more straightly. Finally, a nondimensionalized mass flow profile is obtained by numerical experiments, where various nozzle widths and inlet pressures are tested.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.203-210
• /
• 2015

The ecological environment monitoring system configured with Sensor Node, Gateway, Service Platform, and Web Browser. In this paper, we designed gateway resource tree and service function to do handling in the ecological environment monitoring service. Gateway Service Function based on oneM2M Common Service Function, Gateway Resource Tree configured with Application Part handling Sensor Data and Gateway link handling. lastly Device Registration, Sensing, Control, Profile Management.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.6
• /
• pp.401-415
• /
• 1989

A simple but accurate analytical model for the lateral channel electric field in gate-offset structured Lightly Doped Drain MOSFET has been developed. Our model assumes Gaussian doping profile, rather than simple uniform doping, for the lightly doped region and our model can be applied to LDD structures where the junction depth of LDD is not identical to the heavily doped drain. The validity of our model has been proved by comparing our analytical results with two dimensional device simulations. Due to its simplicity, our model gives a better understanding of the mechanisms involved in reducing the electric field in the LDD MOSFET. The model shows clearly the dependencies of the lateral channel electric field on the drain and gate bias conditions and process, design parameters. Advantages of our analytical model over costly 2-D device simulations is to identify the effects of various parameters, such as oxide thickness, junction depth, gate/drain bias, the length and doping concentration of the lightly doped region, on the peak electric field that causes hot-electron pohenomena, individually. Our model can also find the optimum doping concentration of LDD which minimizes the peak electric field and hot-electron effects.

• Journal of Korean Institute of Industrial Engineers
• /
• v.18 no.1
• /
• pp.155-167
• /
• 1992

This paper presents an automatic setup planning system for turning operation of symmetric rotational parts. The proposed setup planning system determines workpiece holding method, number of setup, clamping surface, and workpiece holding device by using design data, part description database and part feature recognition information. The workpiece holding method is based on functional name and length/diameter ratio of the given part, and number of setup is determined by part profile type and its technological constraints. Clamping surface and workpiece holding device are determined by using information about the results of workpiece holding method and number of setup, and capacity of workpiece holding devices. A case study is performed to show the performance of the proposed system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.404-408
• /
• 2006

최근 임베디드 디바이스에 여러 가지 장점을 제공하는 자바기술은 필수적인 요소가 되었다. 임베디드 디바이스에 적용되는 자바기술은 J2ME 플랫폼이며, 이는 K 가상 머신(K Virtual Machine)의 핵심인 CLDC(Connected Limited Device Configuration)와 그래픽 유저 인터페이스, 네트워크 API, 사운드 API 등을 명세하고 있는 MIDP(Mobile Information Device Profile)로 구성되어 있다. 이 중 그래픽 유저 인터페이스와 네트워크, 사운드 부분은 구현 시 시스템에 의존적인 부분을 따로 구현해야 하는데, 이는 네이티브(native)함수로 구현할 수 있다. 본 논문에서는 J2ME 플랫폼에서 정의된 사운드 API 의 기능들을 분석하여 임베디드 시스템에 적합한 사운드 API 의 네이티브 함수를 구현하였다.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.45-51
• /
• 2021

The effect of the out-of-plane retardation (Rth) of a substrate film on the viewing-angle dependence of transmittance (TR) in a display device was investigated. When the polarization state of input light deviates from the transmission axis of the polarizer, Rth of the substrate film induces inhomogeneous viewing-angle dependence of TR. The inhomogeneity of TR gets worse for greater values of of Rth. The inhomogeneous TR profile can be eliminated by inserting compensation films, which convert the input polarization state to the linear polarization state parallel to the transmission axis of the polarizer.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.917-919
• /
• 2011

Recently, most network communication chips are powered; which causes power consumption a heavily constraint. Since, there are a lot of expectations on TPM to have a high performance in terms of authentication of its device. During the design process there is a need to estimate the security of the design but it always when the chip has already been manufactured. This paper designed a power consumption control monitor in TPM device which evaluate the voltage drop during processing of use. Therefore we will analyze the power consumption profile. The result shows that the voltage drop leads to vulnerability of the system to attackers during communication process.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.1024-1027
• /
• 2011

본 논문은 HD (High-definition) video, SD (Standard-definition) video, low quality video, handset video, 4 가지 Imaging Device 에 대한 프로파일 분석을 통해 비디오 프레임 상에 나타나는 위 변조를 검사하는 방법을 제안한다. High-definition video, Standard-definition video, low quality video, handset video 에 대한 분석을 하고 각 영상의 특이 점을 파악 하여 분류한 클래스에 대한 프로파일검사를 통해 EM Algorithm 을 이용하여 영상의 위 변조를 검사 하고 영상의 신뢰성을 높인다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2689-2696
• /
• 2015

Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.