• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.909-917
• /
• 2007

Recently the trend of automobile industry is that IQS evaluation index against a sensitivity quality is increasing. To reduce rattle noise due to speaker sound at low frequencies, it is required the advanced investigation of a package tray panel and a door module panel. This paper optimized the design parameters of package tray panel according to the theoretical background about robust design and suggested the design guideline for resonance avoidance and the reduction of vibrational sensitivity considering the excitation frequency of woofer speaker. In addition, it is suggested the design guideline of a door module panel through the sensitivity analysis in case of the speaker excitation. Finally, the design factor analysis of the quality deviation of a mother-car will make it possible to guarantee the stable characteristics of vehicle vibration in the early stage of vehicle development. These improvements can lead to shortening the time needed to develop better vehicles.

• Tunnel and Underground Space
• /
• v.12 no.4
• /
• pp.268-276
• /
• 2002

In this study, a 3D coordinate measurement system equipped with a laser displacement meter for digitizing rock joint surface was established and the digitized data were used to calculate several roughness parameters. The parameters used in this study were micro avenge inclination $angle(i_{ave})$, average slope of joint $asperity(SL_{ ave})$, root mean square of $i-angle(i_{rms})$, standard deviation of height(SDH), standard deviation of $i-angle(SD_i)$, roughness profile $index(R_P)$, and fractal dimension(D). The relationships between the roughness parameters based on the digitzation of the surface profile were analyzed. Since the measured value varied according to the degree of reflection and the variation of colors at the measuring point, rock joint surface was painted in white to minimize the influence of the surface conditions. The comparison of the measured values and roughness parameters before and after painting revealed the better consequence from measurement on the painted surfaces. Also, effect of measuring interval was studied. As measured interval was increased, roughness parameters were exponentially decreased. The incremental sequence of degree of decrease was $SDH\; i_{ave},\; i_{rms},\; SD_i,\;and\; R_ p-1$. As a result of comparison of parameters from pin-type measurement system and laser type measurement system, all value of parameters were higher when laser-type measurement system was used, except SDH.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.673-682
• /
• 2007

Recently the trend of automobile industry is that IQS evaluation index against a sensitivity quality is increasing. To reduce rattle noise due to speaker sound at low frequencies, it is required the advanced technology analysis process of body structure. This paper optimized the design parameters of package tray panel according to the theoretical background about robust design and suggested the design guideline for resonance avoidance and the reduction of vibrational sensitivity considering the excitation frequency of woofer speaker. And this paper described the design process of a door module panel through the sensitivity analysis in case of the door speaker excitation. Finally, the analysis of the quality deviation using mother car is suggested to guarantee the stable characteristics of vehicle vibration in the early stage of vehicle development. These improvements can lead to shortening the time needed to develop better vehicles.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.39-49
• /
• 2020

This study empirically examines herd behavior for fast moving consumer goods (FMCG) sector stocks under varied market return conditions and the period during the global financial crisis and its aftermath. We examine the sample of stocks trading on the Nifty FMCG Index of the Indian equity market from January 2008 up to December 2018 using the dispersion measure of cross sectional absolute deviation and examine its relationship with the market return to explore herd phenomenon. Quantile regression estimate is used and the results of the study validate rational asset pricing models as the sector does not display herding. In contrast, anti-herd behavior at lower and median quantile values is observed. A possible reason can be the non-cyclical nature of the industry where investors rely more on the fundamentals rather than crowd chasing. We also findthe absence of herd phenomenon during the market asymmetries of bull and bear phases, extreme movements, the period of the global financial crisis, and afterward. We further examine herding under the impact of the information technology (IT) industry and conclude that significant return movements in IT sector impact dispersions in the FMCG industry. Also, there is a co-varying risk between the two sectors confirming the spillover in an integrated market.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.10
• /
• pp.480-486
• /
• 2005

This paper proposes a method to consider an aging failure probability and survival probability of power system components, though only aging failure probability has been considered in existing mean life calculation. The estimates of the mean and its standard deviation is calculated by using Weibull distribution, and each estimated parameters is obtained from Data Analytic Method (Type H Censoring). The parameter estimation using Data Analytic Method is simpler and faster than the traditional calculation method using gradient descent algorithm. This paper shows calculation procedure of the mean life and its standard deviation by the proposed method and illustrates that the estimated results are close enough to real historical data of combustion turbine generating units in Korean systems. Also, this paper shows the calculation procedures of a probabilistic failure prediction through a stochastic data analysis. Consequently, the proposed methods would be likely to permit that the new deregulated environment forces utilities to reduce overall costs while maintaining an are-related reliability index.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.2
• /
• pp.97-106
• /
• 1999

This paper proposes the structure and the algorithm of the Fuzzy-Neural Controller(FNNC) which is able to adapt itself to unknown plant and the change of circumstances at the Fuzzy Logic Controller(FLC) with the Neural Network. This Learning Fuzzy Logic Controller is made up of Fuzzy Logic controller in charge of a main role and Neural Network of an adaptation in variable circumstances. This construct optimal fuzzy controller applied to the 2-area load frequency control of power system, and then it would examine fitness about parameter variation of plant or variation of circumstances. And it proposes the optimal Scale factor method wsint three preformance functions( E, , U) of system dynamics of load frequency control with error back-propagation learning algorithm. Applying the controller to the model of load frequency control, it is shown that the FNNC method has better rapidity for load disturbance, reduces load frequency maximum deviation and tie line power flow deviation and minimizes reaching and settling time compared to the Optimal Fuzzy Logic Controller(OFLC) and the Optimal Control for optimzation of performance index in past control techniques.

• The Journal of Fisheries Business Administration
• /
• v.39 no.3
• /
• pp.25-47
• /
• 2008

The Fishing Communities (so-called Uchongae) in Korea was legally established in 1962. It has been gradually expanded by quantity, and we have total 1,969 communities in 2006. The major establishment purpose of Uchongae was put 2 functions. The first function is to make up the double industry structure in coastal region, and second function is to make economical condition for Uchongae. Nevertheless the Fishing Communities System in Korea was not successfully developed after first beginning. The Income gap have become heavily between fishing area and non - fishing area, including agricultural area. The income gap has been due to rapid industrialization and urbanization in Korea. And the income gap even have become heavily among Uchongaes. In this paper, It have been researched the degree of Income inequality among Uchongaes in Korea during 1986-2006. The income inequality degree was analyzed by Gini coefficient and Mean Log Deviation (MLD) using Lorenz Curve. According to analysis result, the Gini coefficient of Uchongaes in Korea has been about 2-times high from 0.0847 to 0.1770 during 20 years. And the MLD has been 5.4 times from 0.0125 to 0.0679 during same periods. This means to more wide the general Income Inequality among the Uchongaes in Korea. Especially, It means to more wide the gap of high ranking Uchongaes and low ranking Uchongaes that MLD index multiplier has been more high.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.106-114
• /
• 2019

Recently, the manufacturing process system in the industrial field has become more and more complex and has been influenced by many and various factors. Moreover, these factors have the dependent correlation rather than independent of each other. Therefore, the statistical analysis has been extended from the univariate method to the multivariate method. The process capability indices have been widely used as statistical tools to assess the manufacturing process performance. Especially, the multivariate process indices need to be enhanced with more useful information and extensive application in the recent industrial fields. The various multivariate process capability indices have been studying by many researchers in recent years. Hence, the purpose of the study is to compare the useful and various multivariate process capability indices through the simulation. Among them, we compare the useful models of several multivariate process capability indices such as $MC_{pm}$, $MC^+_{pm}$ and $MC_{pl}$. These multivariate process capability indices are incorporates both the process variation and the process deviation from target or consider the expected loss caused by the process deviation from target. Through the computational examples, we compare these process capability indices and discuss their usefulness and effectiveness.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.6
• /
• pp.374-381
• /
• 2000

This study was conducted to select sesame varieties with high cultural stabilities by comparing several parameters of agronomic traits under the different cultural environments. Of the six areas, Iksan and Jinju areas which showed positively larger environment index values were relatively adequate cultural conditions for sesame. At the comparison of cultural stability of agronomic traits by Eberhart and Russell regression model among sesame breeding lines, Suwon 169 showed more stable regression coefficient values to the number of capsules per plant, number of seeds per capsule and seed weight per plant, and Iksan 12 showed more stable regression coefficient values to culm length and weight per plant. At the comparison of cultural stability of yield per 10a, Suwon 169 and Iksan 12 among sesame breeding lines showed more stable respectively, deviation values of 0.99, 0.98 respectively, and more less regression deviation values of 0.074, 0.167 respectively. Therefore those breeding lines are comparatively higher stabilities to yield determining agronomic traits under the different cultural environments, and it was concluded that those two breeding lines had the possibility to recommend promising breeding lines in the future.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.3
• /
• pp.200-207
• /
• 2003

'||'||'||'&'||'||'||'quot;Overheating index'||'||'||'&'||'||'||'quot;, the normalized difference in incident solar energy between a target surface and a level surface, is helpful in estimating the spatial variation in daily maximum temperature at the landscape scale. It can be computed as the ratio of the 4-hour cumulative solar irradiance surplus or deficit from that over a level surface to the maximum possible deviation (15 MJ $m^{-2}$ ) during the midafternoon. Ecosystem models may, for simplicity, use an empirical proxy (exposure index) variable combining slope and aspect in place of the overheating index to account for the variation of midafternoon solar irradiance. A comparative study with real-world landscape data was carried out to evaluate the performance of exposure index in replacing the overheating index. Overheating indices for summer solstice, fall equinox and winter solstice were calculated at 573,650 grid cells constituting the land surface of Donggye-Myun, Sunchang County in Korea, based on a 10-m DEM. Exposure index was also calculated for the same area and fitted for the variation of overheating index to derive a 2$^{nd}$ -order linear regression equation. The coefficient of determination ($R^2$) was 0.50 on summer solstice, 0.56 on fall equinox, and 0.44 on winter solstice, respectively. These are much lower than the theoretically calculated $R^2$ values ranging from 0.7 in summer to 0.9 in autumn. According to our study, exposure index failed to accurately predict the cumulative solar irradiance over a complex terrain, hindering its application to daily maximum temperature estimation. We suggest direct calculation of the overheating index in preference to using the exposure index.