• Therapeutic Science for Rehabilitation
• /
• v.9 no.4
• /
• pp.107-120
• /
• 2020

Objective : The purpose of this study was to investigate the effectiveness and basis of rehabilitation intervention in patients with spinal cord injury by systematic review and meta-analysis of randomized controlled studies. Methods : Two researchers independently searched and selected a study published in an academic journal using a search term in an international thesis database. A total of 21 studies met the selection criteria, and qualitative evaluation of the study was conducted using the PEDro Scale. Meta-analysis was performed using Comprehensive Meta-Analysis 3.0 program. Results : A total of 713 subjects were included. The results of the meta-analysis showed a score of 0.406 (95.0% confidence interval: 0.221 ~ 0.591) for intervention using physical activity and 0.505 (95.0% confidence interval: 0.449 ~ 1.528) for electronic stimulation therapy, which showed medium effect; educational intervention had a 0.248 (95.0% confidence interval: 0.033 ~ 0.464), and mixed intervention 0.280 (95.0% confidence interval: 0.122 ~ 0.438). It was shown that the effect of small (small). There was a significant heterogeneity in the statistical heterogeneity test, and thus the random effects model was selected and analyzed. Conclusion : The results showed that rehabilitation interventions were effective for patients with spinal cord injury. During the rehabilitation of spinal cord injury patients, clinicians are expected to contribute to the development of programs to improve their lifestyles.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.394-399
• /
• 2013

The recalcitrant hairs which are accumulated in the U-trap equipped to prevent the stench from the drainage produce the phenomenon of blocking the flow of water through the home drainage pathway. The chemical dissolution solutions commercially manufactured are excessively poured into U-trap to solve this blocking problem. In this study, the specially designed instrument was developed for the experiments to cut and crush the hairs of which main component are the recalcitrant keratin proteins. The performance of the instrument for cutting and crushing hairs was investigated using experimental methods. The cutting and weighing method was used in order to obtain the average length of a large amount of hairs cut by instrument. This method is relatively simple to measure the weight of cutting hairs to obtain the average length of the fibers, the values of average length showed not greater tolerances. Also the average cutting number was defined to evaluate the performance of the cutting and crushing instruments designed for this study. We were able to apply these evaluation methods to provide the criteria to obtain the optimal structure of instrument and proper operation time in the given experimental conditions. These experimental methods and results will provide the good example to design and to analyze the various device that can be used for cutting the fibers. The cutting and crushing instrument developed in this study showed the effective abilities to cutting the hairs. The general using the cuttting and crushing instrument at every home would be helpful to prevent water environmental pollution.

• Journal of Korea Soil Environment Society
• /
• v.1 no.1
• /
• pp.89-102
• /
• 1996

An integrated model is presented to describe underground flow and mass transport, using a multicomponent multiphase approach. The comprehensive governing equation is derived considering mass and force balances of chemical species over four phases(water, oil, air, and soil) in a schematic elementary volume. Compact and systemati notations of relevant variables and equations are introduced to facilitate the inclusion of complex migration and transformation processes, and variable spatial dimensions. The resulting nonlinear system is solved by a multidimensional finite element code. The developed code with dynamic array allocation, is sufficiently flexible to work across a wide spectrum of computers, including an IBM ES 9000/900 vector facility, SP2 cluster machine, Unix workstations and PCs, for one-, two and three-dimensional problems. To reduce the computation time and storage requirements, the system equations are decoupled and solved using a banded global matrix solver, with the vector and parallel processing on the IBM 9000. To avoide the numerical oscillations of the nonlinear problems in the case of convective dominant transport, the techniques of upstream weighting, mass lumping, and elementary-wise parameter evaluation are applied. The instability and convergence criteria of the nonlinear problems are studied for the one-dimensional analogue of FEM and FDM. Modeling capacity is presented in the simulation of three dimensional composite multiphase TCE migration. Comprehesive simulation feature of the code is presented in a companion paper of this issue for the specific groundwater or flow and contamination problems.

• Journal of the Korean Geographical Society
• /
• v.48 no.2
• /
• pp.239-258
• /
• 2013

This study aims to examine that Jeollabuk-do 14 cities and counties's job creation policy would lead to a virtuous circle of the local economy through measuring the ratio of spatial mismatch. We suppose that the higher proportion of spatial mismatch in a city or county is, the lower multiplier effect contributes the local economy, especially in the income of residents and the influx of population. For the analysis, this study uses Korean Regional Employment Survey Micro-data and calculates the labor demand self-sufficiency(LDSS) rate of every local labor market for measuring the degree of spatial mismatch. Also we calculate the LDSS rate of employment status, industry, job classification and wage for testing the independency of local labor market. After analyzing, just Jeonju, Gunsan, Iksan, and Namwon could be regarded as independent local labor market where LDSS rates are above 75% in most criteria. But other local labor markets depend on outer labor supplies. For the development of regional economy, it is necessary to consider the creation of 'good jobs' that can induce the labor in parallel with the quantitative increase of employment.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.3
• /
• pp.57-69
• /
• 2021

Objective : The purpose of this study was to identify occupational therapy guidelines for patients with stroke according to the clinical guidelines, and to investigate the quality and characteristics of the identified guidelines. Methods : This involved a review of domestic and foreign rehabilitation treatment guidelines from 2008 to 2019. These guidelines were searched using, the search terms: 'stroke', 'guideline', 'practice guideline', 'recommendation', 'protocol compliance', 'practice guideline', and 'stroke guidelines'. Results : A total of 708 papers were identified from the search. Eight guidelines met the selection criteria and were included in this review. The selected guidelines were developed in Canada, Australia, the United States, the United Kingdom, and Korea. One of the eight guidelines was occupational therapy guidelines, and the other seven were rehabilitation guidelines. The guidelines were categorized into a total of 36 topics, including 28 guidelines for stroke rehabilitation in Australia, 24 guidelines for the British and American Heart Association, and 23 guidelines for stroke rehabilitation developed in Korea. Conclusion : In this study, the guidelines for occupational therapy for existing stroke patients were identified, and the quality and characteristics of the guidelines were compared. The results of this study will provide important basic data for the development of occupational therapy guidelines for stroke in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.4
• /
• pp.278-287
• /
• 2023

This study aims to analyze and evaluate the structural strength of a 53ft Liquefied Natural Gas (LNG) tank container according to International Organization for Standardization (ISO) 1496-3, amidst growing global demand for LNG transportation. The research was conducted in two main stages: structural analysis using Finite Element Analysis (FEA) under various load conditions, and structural strength tests following ISO 1496-3 test procedures. The structural analysis was performed considering different loading conditions to assess the structural safety of the tank container. Calculated stresses were compared with allowable stress under specified load conditions. The structural strength tests were conducted at Mokpo National University's Subsea Umbilical cable Riser Flowline R&D Center, which provided a suitable testing environment. The study found that calculated stresses met the allowable stress under specified load conditions, confirming the structural safety of the tank container. Additionally, the maximum deformation and permanent deformation satisfied the design criteria for all test cases, indicating the container's structural strength meets requirements. The research also contributed valuable data for future structural strength tests of similar products and facilitated the development of safe and efficient LNG transportation solutions by developing effective test procedures in accordance with ISO 1496-3 standards.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.476-484
• /
• 2017

The purpose of this paper is to verify the structural integrity of a region with numerous penetration-holes in offshore structures such as semi-submersible rig and FPSO. In order to effectively check the yielding and buckling strength of plate members with penetration-holes, a screening analysis program was developed with the FE analysis tool to generate fine meshed model using the theoretical and analysis methods. When a hole is appeared in the plate structure members, the flow of stress is altered such that concentrations of stress form near the hole. Stress concentrations are of concern during both preliminary and detail design and need to be addressed from the perspectives of strength. To configure the geometrical shape, very fine meshed FE analysis is needed as the most accurate method. However, this method is practically impossible to apply for the strength verifications for all perforated plates. In this paper, screening analysis method was introduced to reduce analysis tasks prior to detailed FE analysis. This method is applied to not only the peak stress calculation combined stress concentration factor with nominal stress but also nominal equivalent stress calculation considering cutout effects. The areas investigated by very fine meshed analysis were to be chosen through screening analysis without any reinforcements for penetration-holes. If screening analysis results did not satisfy the acceptance criteria, direct FE analysis method as the 2nd step approach were applied with one of the coarse meshed model considering hole or with the very fine meshed model considering the hole shape and size. In order to effectively perform the local fine meshed analysis, automatic model generating program was developed based on the MSC/PATRAN which is pre-post FE analysis program. Buckling strength was also evaluated by Common Structure Rule (CSR) adopted by IACS as the stress obtained from very fine meshed FE analysis. Due to development of the screening analysis program and automatic FE modeling program, it was able to reduce the design periods and structural analysis costs.

• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1221-1234
• /
• 2013

The purpose of this study is to suggest the methodology for the computation of uplift pressure and discharge of the seepage flow under gravity dam. A 3-dimensional FDM model is developed for this purpose and this model can simulate the saturated Darcian flow in heterogeneous media. For the verification of the numeric model, test simulation has been executed and the mass balance has been checked. The error does not exceed 3%. Using the developed model, The uplift pressure and seepage flow discharge under gravity dam has been calculated. The uplift pressure shows the similar pattern, comparing with the result of flow-net method. As the length of grout curtain increases, the uplift pressure decreases linearly, but the seepage flow discharge shows the non-linear decreasing pattern. The coefficients of the formulas in the dam-design criteria have been analysed, and ${\alpha}=1/3$ corresponds to the value when the length of curtain grout is 70% of the aquifer height. The uplift pressure near the pressure relief drain has the big curvature vertically and horizontally. The developed model in this study can be used for the evaluation of the effects of seepage flow under gravity dam.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.3
• /
• pp.107-121
• /
• 2023

The assessment of perceived naturalness aims to elucidate the human perception and explain the interaction between natural environments and humans. The perception of ecological assets that exhibit distinct characteristics within a specific region can manifest in various representations. Based on the users' perceptions and interviews regarding ecological assets, this study assessed the perceived naturalness from a cultural services perspective. Specifically, the discussions on Ansan City's ecological assets and revolved around the inherent value of naturalness in dimensions, such as the necessity for conservation and the sustainable development of ecological assets, the perception of ecosystem benefits, the representativeness as a local asset, and usability. Subsequently, the Q method was employed to present 25 representative ecological assets to 25 users. As a result, user groups with different value systems for each question were identified, and hypothetical personas for cultural service enjoyment were distinguished. The most representative persona among the 25 users was identified as AWP (a type that values the conservation of aquatic ecosystems, prefers waterfront landscapes, and enjoys walking). Since perceived naturalness is conceptually similar to the "benefits perceived by users" in evaluating ecosystem services, it can provide more practical evaluation criteria for cultural services.

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.127-133
• /
• 2024

The elbow joint is made up of three different bones. X-rays or other radiological exams are commonly used to diagnose elbow injuries or disorders caused by physical activity and external forces. Previous research on the elbow joint reported a new examination method that meets the imaging evaluation criteria in the tilt position by Z-axis elevation of the forearm. Therefore, this study aims to design an optimized instrument and develop an aid applicable to other upper extremity exams. After completing the 2D drawing and 3D modeling design, the final design divided into four parts was fabricated with a 3D printer using ABS plastic and assembled. The developed examination aid consists of a four-stage Z-axis elevation tilt angle function (0°, 5°, 10°, and 15°) and can rotate and fixate 360° in 1-degree increments. It was designed to withstand a maximum equivalent stress of 56.107 Pa and a displacement of 1.6548e-5 mm through structural analysis to address loading issues caused by cumulative frequency of use and physical utilization. In addition to X-ray exams of the elbow joint, the developed aid can be used for shoulder function tests by rotating the humerus and also be applied to MRI and CT exams as it is made of non-metallic materials. It will contribute to the accuracy and efficiency of medical imaging diagnosis through clinical applications of various devices and medical imaging exams in the future.