• Korean Journal of Remote Sensing
• /
• v.33 no.5_2
• /
• pp.721-732
• /
• 2017

With the increasing socio-economic importance of rice as a global staple food, several models have been developed for rice yield estimation by combining remote sensing data with carbon cycle modelling. In this study, we aimed to estimate rice yield in Korea using such an integrative model using satellite remote sensing data in combination with a biophysical crop growth model. Specifically, daily meteorological inputs derived from MODIS (Moderate Resolution imaging Spectroradiometer) and radar satellite products were used to run a light use efficiency based crop growth model, which is based on the MODIS gross primary production (GPP) algorithm. The modelled biomass was converted to rice yield using a harvest index model. We estimated rice yield from 2003 to 2014 at the county level and evaluated the modelled yield using the official rice yield and rice straw biomass statistics of Statistics Korea (KOSTAT). The estimated rice biomass, yield, and harvest index and their spatial distributions were investigated. Annual mean rice yield at the national level showed a good agreement with the yield statistics with the yield statistics, a mean error (ME) of +0.56% and a mean absolute error (MAE) of 5.73%. The estimated county level yield resulted in small ME (+0.10~+2.00%) and MAE (2.10~11.62%),respectively. Compared to the county-level yield statistics, the rice yield was over estimated in the counties in Gangwon province and under estimated in the urban and coastal counties in the south of Chungcheong province. Compared to the rice straw statistics, the estimated rice biomass showed similar error patterns with the yield estimates. The subpixel heterogeneity of the 1 km MODIS FPAR(Fraction of absorbed Photosynthetically Active Radiation) may have attributed to these errors. In addition, the growth and harvest index models can be further developed to take account of annually varying growth conditions and growth timings.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.73-85
• /
• 2013

Nowadays, in today's information society, the importance of the knowledge service using the information to creative value is getting higher day by day. In addition, depending on the development of IT technology, it is ease to collect and use information. Also, many companies actively use customer information to marketing in a variety of industries. Into the 21st century, companies have been actively using the culture arts to manage corporate image and marketing closely linked to their commercial interests. But, it is difficult that companies attract or maintain consumer's interest through their technology. For that reason, it is trend to perform cultural activities for tool of differentiation over many firms. Many firms used the customer's experience to new marketing strategy in order to effectively respond to competitive market. Accordingly, it is emerging rapidly that the necessity of personalized service to provide a new experience for people based on the personal profile information that contains the characteristics of the individual. Like this, personalized service using customer's individual profile information such as language, symbols, behavior, and emotions is very important today. Through this, we will be able to judge interaction between people and content and to maximize customer's experience and satisfaction. There are various relative works provide customer-centered service. Specially, emotion recognition research is emerging recently. Existing researches experienced emotion recognition using mostly bio-signal. Most of researches are voice and face studies that have great emotional changes. However, there are several difficulties to predict people's emotion caused by limitation of equipment and service environments. So, in this paper, we develop emotion prediction model based on vision-based interface to overcome existing limitations. Emotion recognition research based on people's gesture and posture has been processed by several researchers. This paper developed a model that recognizes people's emotional states through body gesture and posture using difference image method. And we found optimization validation model for four kinds of emotions' prediction. A proposed model purposed to automatically determine and predict 4 human emotions (Sadness, Surprise, Joy, and Disgust). To build up the model, event booth was installed in the KOCCA's lobby and we provided some proper stimulative movie to collect their body gesture and posture as the change of emotions. And then, we extracted body movements using difference image method. And we revised people data to build proposed model through neural network. The proposed model for emotion prediction used 3 type time-frame sets (20 frames, 30 frames, and 40 frames). And then, we adopted the model which has best performance compared with other models.' Before build three kinds of models, the entire 97 data set were divided into three data sets of learning, test, and validation set. The proposed model for emotion prediction was constructed using artificial neural network. In this paper, we used the back-propagation algorithm as a learning method, and set learning rate to 10%, momentum rate to 10%. The sigmoid function was used as the transform function. And we designed a three-layer perceptron neural network with one hidden layer and four output nodes. Based on the test data set, the learning for this research model was stopped when it reaches 50000 after reaching the minimum error in order to explore the point of learning. We finally processed each model's accuracy and found best model to predict each emotions. The result showed prediction accuracy 100% from sadness, and 96% from joy prediction in 20 frames set model. And 88% from surprise, and 98% from disgust in 30 frames set model. The findings of our research are expected to be useful to provide effective algorithm for personalized service in various industries such as advertisement, exhibition, performance, etc.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.175-190
• /
• 1994

In order to get fundamental information for prediction of landslide hazard, both forest and site factors affecting slope stability were investigated in many areas of active landslides. Twelve descriptors were identified and quantified to develop the prediction model by multivariate statistical analysis. The main results obtained could be summarized as follows : The main factors influencing a large scale of landslide were shown in order of precipitation, age group of forest trees, altitude, soil texture, slope gradient, position of slope, vegetation, stream order, vertical slope, bed rock, soil depth and aspect. According to partial correlation coefficient, it was shown in order of age group of forest trees, precipitation, soil texture, bed rock, slope gradient, position of slope, altitude, vertical slope, stream order, vegetation, soil depth and aspect. The main factors influencing a landslide occurrence were shown in order of age group of forest trees, altitude, soil texture, slope gradient, precipitation, vertical slope, stream order, bed rock and soil depth. Two prediction models were developed by magnitude and frequency of landslide. Particularly, a prediction method by magnitude of landslide was changed the score for the convenience of use. If the total store of the various factors mark over 9.1636, it is evaluated as a very dangerous area. The mean score of landslide and non-landslide group was 0.1977 and -0.1977, and variance was 0.1100 and 0.1250, respectively. The boundary value between the two groups related to slope stability was -0.02, and its predicted rate of discrimination was 73%. In the score range of the degree of landslide hazard based on the boundary value of discrimination, class A was 0.3132 over, class B was 0.3132 to -0.1050, class C was -0.1050 to -0.4196, class D was -0.4195 below. The rank of landslide hazard could be divided into classes A, B, C and D by the boundary value. In the number of slope, class A was 68, class B was 115, class C was 65, and class D was 52. The rate of landslide occurrence in class A and class B was shown at the hige prediction of 83%. Therefore, dangerous areas selected by the prediction method of landslide could be mapped for land-use planning and criterion of disaster district. And also, it could be applied to an administration index for disaster prevention.

• The Mathematical Education
• /
• v.30 no.1
• /
• pp.1-19
• /
• 1991

This study intends to provide some desirable suggestions for the development of application oriented mathematics curriculum. More specific objects of this study is: 1. To identify the meaning of application and modelling in mathematics curriculm. 2. To illuminate the historical background of and trends in application and modelling in the mathematics curricula. 3. To consider the reasons for including application and modelling in the mathematics curriculum. 4. To find out some implication for developing application oriented mathematics curriculum. The meaning of application and modelling is clarified as follows: If an arbitrary area of extra-mathematical reality is submitted to any kind of treatment which invovles mathematical concepts, methods, results, topics, we shall speak of the process of applying mathemtaics to that area. For the result of the process we shall use the term an application of mathematics. Certain objects, relations between them, and structures belonging to the area under consideration are selected and translated into mathemtaical objects, relation and structures, which are said to represent the original ones. Now, the concept of mathematical model is defined as the collection of mathematical objcets, . relations, structures, and so on, irrespective of what area is being represented by the model and how. And the full process of constructing a mathematical model of a given area is called as modelling, or model-building. During the last few decades an enormous extension of the use of mathemtaics in other disciplines has occurred. Nowadays the concept of a mathematical model is often used and interest has turned to the dynamic interaction between the real world and mathematics, to the process translating a real situation into a mathematical model and vice versa. The continued growing importance of mathematics in everyday practice has not been reflected to the same extent in the teaching and learning of mathematics in school. In particular the world-wide 'New Maths Movement' of the 19608 actually caused a reduction of the importance of application and modelling in mathematics teaching. Eventually, in the 1970s, there was a reaction to the excessive formallism of 'New Maths', and a return in many countries to the importance of application and connections to the reality in mathematics teaching. However, the main emphasis was put on mathematical models. Applicaton and modelling should be part of the mathematics curriculum in order to: 1. Convince students, who lacks visible relevance to their present and future lives, that mathematical activities are worthwhile, and motivate their studies. 2. Assist the acqusition and understanding of mathematical ideas, concepts, methods, theories and provide illustrations and interpretations of them. 3. Prepare students for being able to practice application and modelling as private individuals or as citizens, at present or in the future. 4. Foster in students the ability to utilise mathematics in complex situations. Of these four reasons the first is rather defensive, serving to protect or strengthen the position of mathematics, whereas the last three imply a positive interest in application and modelling for their own sake or for their capacity to improve mathematics teaching. Suggestions, recomendations and implications for developing application oriented mathematics curriculum were made as follows: 1. Many applications and modelling case studies suitable for various levels should be investigated and published for the teacher. 2. Mathematics education both for general and vocational students should encompass application and modelling activities, of a constructive as well as analytical and critical nature. 3. Application and modelling activities should. be introduced in mathematics curriculum through the interdisciplinary integrated approach. 4. What are the central ideas of, and what are less-important topics of application-oriented curriculum should be studied and selected. 5. For any mathematics teacher, application and modelling should form part of pre- and in-service education.

• Journal of Intelligence and Information Systems
• /
• v.18 no.4
• /
• pp.97-116
• /
• 2012

Conceptual modeling is an important step for successful system development. It helps system designers and business practitioners share the same view on domain knowledge. If the work is successful, a result of conceptual modeling can be beneficial in increasing productivity and reducing failures. However, the value of conceptual modeling is unlikely to be evaluated uniformly because we are lack of agreement on how to elicit concepts and how to represent those with conceptual modeling constructs. Especially, designing relationships between components, also known as part-whole relationships, have been regarded as complicated work. The recent study, "Representing Part-Whole Relations in Conceptual Modeling : An Empirical Evaluation" (Shanks et al., 2008), published in MIS Quarterly, can be regarded as one of positive efforts. Not only the study is one of few attempts of trying to clarify how to select modeling alternatives in part-whole design, but also it shows results based on an empirical experiment. Shanks et al. argue that there are two modeling alternatives to represent part-whole relationships : an implicit representation and an explicit one. By conducting an experiment, they insist that the explicit representation increases the value of a conceptual model. Moreover, Shanks et al. justify their findings by citing the BWW ontology. Recently, the study from Shanks et al. faces criticism. Allen and March (2012) argue that Shanks et al.'s experiment is lack of validity and reliability since the experimental setting suffers from error-prone and self-defensive design. They point out that the experiment is intentionally fabricated to support the idea, as such that using concrete UML concepts results in positive results in understanding models. Additionally, Allen and March add that the experiment failed to consider boundary conditions; thus reducing credibility. Shanks and Weber (2012) contradict flatly the argument suggested by Allen and March (2012). To defend, they posit the BWW ontology is righteously applied in supporting the research. Moreover, the experiment, they insist, can be fairly acceptable. Therefore, Shanks and Weber argue that Allen and March distort the true value of Shanks et al. by pointing out minor limitations. In this study, we try to investigate the dispute around Shanks et al. in order to answer to the following question : "What is the proper value of the study conducted by Shanks et al.?" More profoundly, we question whether or not using the BWW ontology can be the only viable option of exploring better conceptual modeling methods and procedures. To understand key issues around the dispute, first we reviewed previous studies relating to the BWW ontology. We critically reviewed both of Shanks and Weber and Allen and March. With those findings, we further discuss theories on part-whole (or part-of) relationships that are rarely treated in the dispute. As a result, we found three additional evidences that are not sufficiently covered by the dispute. The main focus of the dispute is on the errors of experimental methods: Shanks et al. did not use Bunge's Ontology properly; the refutation of a paradigm shift is lack of concrete, logical rationale; the conceptualization on part-whole relations should be reformed. Conclusively, Allen and March indicate properly issues that weaken the value of Shanks et al. In general, their criticism is reasonable; however, they do not provide sufficient answers how to anchor future studies on part-whole relationships. We argue that the use of the BWW ontology should be rigorously evaluated by its original philosophical rationales surrounding part-whole existence. Moreover, conceptual modeling on the part-whole phenomena should be investigated with more plentiful lens of alternative theories. The criticism on Shanks et al. should not be regarded as a contradiction on evaluating modeling methods of alternative part-whole representations. To the contrary, it should be viewed as a call for research on usable and useful approaches to increase value of conceptual modeling.

• Journal of the Korean Geographical Society
• /
• v.29 no.3
• /
• pp.233-252
• /
• 1994

One of major advantages of Lumped model is its ability to simulate extended flows. A further advantage is that it requires only conventional, readily available hydrological data (rainfall, evaporation and runoff). These two advantages commend the use of this type of model for the analysis of the hydrological effects of landuse change. Experimental Catchment(K11) of Kimakia site in Kenga experienced three phases of landuse change for sixteen and half years. The Institute of Hydrology offered the hydrological data from the catchment for this research. On basis of Blackie's(l972) 9-parameter model, a new model(R1131) was reorganized in consideration of the following aspects to reflect the hydrological characteristics of the catchment: 1) The evapotranspiration necessary for the landuse hydrology, 2) high permeable soils, 3) small catchment, 4) input option for initial soil moisture deficit, and 5) othel modules for water budget analysis. The new model is constructed as a 11-parameter, 3-storage, 1-input option model. Using a number of initial conditions, the model was optimized to the data of three landuse phases. The model efficiencies were 96.78%, 97.20%, 94.62% and the errors of total flow were -1.78%, -3.36%, -5.32%. The bias of the optimized models were tested by several techniques, The extended flows were simulated in the prediction mode using the optimized model and the data set of the whole series of experimental periods. They are used to analyse the change of daily high and low-flow caused by landuse change. The relative water use ratio of the clearing and seedling phase was 60.21%, but that of the next two phases were 81.23% and 83.78% respectively. The annual peak flows of second and third phase at a 1.5-year return period were decreased by 31.3% and 31.2% compared to that of the first phase. The annual peak flow at a 50-year return period in the second phase was an increase of only 4.8%, and that in the third phase was an increase of 12.9%. The annual minimum flow at a 1.5-year return period was decreased by 34.2% in the second phase, and 34.3% in the third phase. The changes in the annual minimum flows were decreased for the larger return periods; a 20.2% decrease in the second phase and 20.9% decrease in the third phase at a 50-year return period. From the results above, two aspects could be concluded. Firstly, the flow regime in Catchment K11 was changed due to the landuse conversion from the clearing and seedling phade to the intermediate stage of pine plantation. But, The flow regime was little affected after the pine trees reached a certain height. Secondly, the effects of the pine plantation on the daily high- and low-flow were reduced with the increase in flood size and the severity of drought.

• Journal of Intelligence and Information Systems
• /
• v.29 no.3
• /
• pp.145-165
• /
• 2023

Recommendation system plays a significant role on relieving difficulties of selecting information among rapidly increasing amount of information caused by the development of the Internet and on efficiently displaying information that fits individual personal interest. In particular, without the help of recommendation system, E-commerce and OTT companies cannot overcome the long-tail phenomenon, a phenomenon in which only popular products are consumed, as the number of products and contents are rapidly increasing. Therefore, the research on recommendation systems is being actively conducted to overcome the phenomenon and to provide information or contents that are aligned with users' individual interests, in order to induce customers to consume various products or contents. Usually, collaborative filtering which utilizes users' historical behavioral data shows better performance than contents-based filtering which utilizes users' preferred contents. However, collaborative filtering can suffer from cold-start problem which occurs when there is lack of users' historical behavioral data. In this paper, hybrid music recommendation system, which can solve cold-start problem, is proposed based on the playlist data of Melon music streaming service that is given by Kakao Arena for music playlist continuation competition. The goal of this research is to use music tracks, that are included in the playlists, and metadata of music tracks and playlists in order to predict other music tracks when the half or whole of the tracks are masked. Therefore, two different recommendation procedures were conducted depending on the two different situations. When music tracks are included in the playlist, LightFM is used in order to utilize the music track list of the playlists and metadata of each music tracks. Then, the result of Item2Vec model, which uses vector embeddings of music tracks, tags and titles for recommendation, is combined with the result of LightFM model to create final recommendation list. When there are no music tracks available in the playlists but only playlists' tags and titles are available, recommendation was made by finding similar playlists based on playlists vectors which was made by the aggregation of FastText pre-trained embedding vectors of tags and titles of each playlists. As a result, not only cold-start problem can be resolved, but also achieved better performance than ALS, BPR and Item2Vec by using the metadata of both music tracks and playlists. In addition, it was found that the LightFM model, which uses only artist information as an item feature, shows the best performance compared to other LightFM models which use other item features of music tracks.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.899-908
• /
• 2004

The rise of income and introduction of 5 day a week working system give korean people opportunities to enjoy their leisure time. And many korean people have much interest in oceanic sports such as yachting and also oceanic leisure equipments. With the popularization and development of the equipments, the scope of oceanic activities has been expanding in Korea just as in the advanced oceanic countries. However, The current conditions for the sports in Korea are not advanced and even worse than underdeveloped countries. In order to develop the underdeveloped resources of Korean marina, we need to customize the marina models of advanced nations to serve the specific needs and circumstances of Korea As such we have carried out a comparative analysis of how Austrailia, Newzealand, Singapore, japan and Malaysia operate their marina, reaching the following conclusions. Firstly, in marina operations, in order to protect personal property rights and to preserve the environment, we must operate membership and non-membership, profit and non-profit schemes separately, yet without regulating the dress code entering or leaving the club house. Secondly, in order to accumulate greater value added, new sporting events should be hosted each year. There is also the need for an active use of volunteers, the generation of greater interest in yacht tourism, and the simplification of CIQ procedures for foreign yachts as well as the provision of language services. Thirdly, a permanent yacht school should be established, and classes should be taught by qualified instructors. Beginners, intermediary, and advanced learner classes should be managed separately with special emphasis on the dinghy yacht program for children. Fourthly, arrival and departure at the moorings must be regulated autonomically, and there must be systematic measures for the marina to be able, in part, to compensate for loss and damages to equipment, security and surveillance after usage fees have been paid for. Fifthly, marine safety personnel must be formed in accordance with Korea's current circumstances from civilian organizations in order to be used actively in benchmarking, rescue operations, and oceanic searches at times of disaster at sea.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.4
• /
• pp.77-88
• /
• 2008

There has been growing demands to manage the water quality of west coastal region due to the large scale urbanization along the coastal zone, the possibility of application of TMDL(Total Maximum Daily Loadings) to Han river, and the natural disaster such as oil spill incident in Taean, Chungnam. However, no system has been developed for such purposes. In this background, the demand of GIS based effective water quality management has been increased to monitor water quality environment and propose best management alternatives for Han river and Kyeonggi bay. This study mainly focused on the development of integrated water quality management system for Han river bas in and its estuary are a connected to Kyeonggi bay to support integrated water quality management and its plan. Integration was made based on GIS by spatial linking between water quality attributes and location information. A GIS DB was built to estimate the amount of generated and discharged water pollutants according to TMDL technical guide and it included input data to use two different water quality models--W ASP7 for Han river and EFDC for coastal area--to forecast water quality and to suggest BMP(Best management Practices). The results of BOD, TN, and TP from WASP7 were used as the input to run EFDC. Based on the study results, some critical areas which have relatively higher pollutant loadings were identified, and it was also identified that the locations discharging water pollutant loadings to river and seasonal factor affected water quality. And the relationship of water quality between river and its estuary area was quantitatively verified. The results showed that GIS based integrated system could be used as a tool for estimating status-quo of water quality and proposing economically effective BMPs to mitigate water pollution. Further studies need to be made for improving system's capabilities such as adding decision making function as well as cost-benefit analysis, etc. Also, the concrete methodology for water quality management using the system need to be developed.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.99-106
• /
• 2002

Researches on integration of design and construction information from earlier era focused on the conceptual data models. Development and prevalent use of commercial database management system led many researchers to design database schemas for enlightening of relationship between non-graphic data items. Although these researches became the foundation fur the proceeding researches. they did not utilize the graphic data providable from CAD system which is already widely used. 4D CAD concept suggests a way of integrating graphic data with schedule data. Although this integration provided a new possibility for integration, there exists a limitation in data dependency on a specific application. This research suggests a new approach on integration for design and construction information, 'Product Model Centered Integration Methodology'. This methodology achieves integration by preliminary research on existing methodology using 4D CAD concept. and by development and application of new integration methodology, 'Product Model Centered Integration Methodology'. 'Design Component' can be converted into digital format by object based CAD system. 'Unified Object-based Graphic Modeling' shows how to model graphic product model using CAD system. Possibility of reusing design information in latter stage depends on the ways of creating CAD model, so modeling guidelines and specifications are suggested. Then prototype system for integration management, and exchange are presented, using 'Product Frameworker', and 'Product Database' which also supports multiple-viewpoints. 'Product Data Model' is designed, and main data workflows are represented using 'Activity Diagram', one of UML diagrams. These can be used for writing programming codes and developing prototype in order to automatically create activity items in actual schedule management system. Through validation processes, 'Product Model Centered Integration Methodology' is suggested as the new approach for integration of design and construction information.