• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.5
• /
• pp.52-62
• /
• 2022

A launch vehicle is a one of the biggest hardware among the products of human technology. For huge size launch vehicles, to transport to Launch Complex and to erect on launch pad precisely and safely is very critical issue. Therefore, a final assembly, transportation, erection and holding in vertical position in launch pad requires very precise operational technology, processes and related aggregates. Those operational concept has been developed to comply with the requirement of each launch vehicle and technology level at that time. In this paper, a progress of operational methodology in global launch vehicles are described. In addition, methodologies used on the KSLV-1 Naro and the KSLV-II Nuri launch vehicle are introduced.

• Journal of Magnetics
• /
• v.11 no.4
• /
• pp.156-159
• /
• 2006

We have studied the magnetic properties of the CuNi nanoparticles for three different sizes prepared by plasma and chemical techniques. The magnetization is enormously enhanced with decreasing the nanoparticle size. This enhanced magnetic moment shows almost inversely linear temperature dependence, which could be interpreted by the Langevin-type superparamagnetism. The field dependence exhibits ferromagnetic-like behavior with weak hysteresis, which could described in terms of uncompensated spin and/or surface anisotropy. In addition, the magnetic data suggest that the CuNi nanoparticles produced by the plasma method result in significantly less oxidized metallic nanoparticles than those prepared by other techniques.

• Journal of Magnetics
• /
• v.11 no.4
• /
• pp.160-163
• /
• 2006

We have prepared crystalline Ag nanoparticles with an average size of 4 nm in diameter by using an inductively coupled plasma reactor equipped with the liquid nitrogen cooling system. Our magnetic data show that the nano-sized effect of Ag nanoparticles on the magnetic properties is ferromagnetic, instead of a diamagnetic component of the Ag bulk and a superparamagnetic component of magnetic nanoparticles. We have also studied the magnetic properties of Ag-Cu nanocomposites with an opposite concentration profile between surface and core. These comparisons indicate that the ferromagnetic component strongly depends on the surface of Ag nanoparticles, while the paramagnetic component is strongly affected by the outer oxide layer, with the background of a diamagnetic component from the core of Ag.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.637-645
• /
• 2008

It is very hard to control the quality of coating work in shipbuilding process, because it is highly affected by several parameters such as space between object and nozzle tip, spray velocity, pressure, tip size, etc.. Even so a coating work in shipbuilding is done by workers' experience and skill as yet. It causes not only an excessive use of paints but also a decrease of productivity. In order to solve this problem, we developed a formula that predicts the film thickness and determined the proper coating pattern. Also we had done a series of experiments to verify the results of this study.

• Journal of the Korean Dietetic Association
• /
• v.10 no.3
• /
• pp.333-344
• /
• 2004

To investigate current status of the elderly meal service program, community centers nationwide were surveyed for congregate meal services. The survey was conducted during the month of December 2002 by mail using self-developed questionnaire on administration, staffs, funding, and meal service management. Only 95 out of 356 community centers (27%) answered and returned the questionnaires, and congregate meal menus were also collected from 20 centers for 492 days. Results were analyzed using SAS package program. In more than half of the elderly congregate meal service programs, following criteria were used in multiple form to allow participation; 65 years old or older, low income, or living alone. All centers served lunch, most of them free of charge, and 88.4% of them provided service 5 days a week. About 79% of the total cost occurred on the congregate meal service was supported by the government. Most of the menus served at congregate meal service were Korean style dish with rice. On the average, each meal provided 3 side dishes including kimchi, in addition to soup or stew. Only 19% of the centers have employed dietitian working for meal service programs; meal menus were prepared by social welfare workers or other non-dietetic personnels in more than 80% of the centers. Food purchasing and food hygiene control was also practiced mainly by social welfare workers or cooks. This study suggests that dietetic professionals are needed to better manage meal service programs for the elderly in both aspects, food hygiene and nutrition. Development of more nutritious menus and determination of appropriate serving sizes for the elderly meal service programs are necessary to meet the RDAs and dietary action guide for the elderly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.364-366
• /
• 2009

We successfully fabricated flexible electronic paper display (EPD) by using toner particles on plastic (PC) substrate. It has high resolution (WVGA : 800 ${\times}$ 480) and 7 inch diagonal viewable image size. The response time was about 0.25 msec at 90 V, a contrast ratio of about 2, a driving voltage of 60 V which we successfully demonstrated to display several images at.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.3
• /
• pp.336-343
• /
• 2015

One of various main jobs in the design of a new tactical vehicle is to develop the lightest chassis parts satisfying the required durability target. In this study, the analytic methods to reduce the size and weight of a lower control arm and chassis frame of a Korean light tactical vehicle are presented. Topology optimization by ATOM (Abaqus Topology Optimization Module) is applied to find the optimal design of the suspension arm with volume and displacement constraints satisfied. In case of chassis frame, the light-weight optimization process associated with design sensitivity method is developed using Isight and ABAQUS. By these analytic methods we can provide design engineers with guides to where and how much the design changes should be made.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.213-219
• /
• 2017

Objective: The present study identified the minimum legible text size by an experiment for eight combinations of background and text colors, which will be used in designing visual information on group-view display (GVD). Background: Information on minimum legible text size is needed to design the visual information presented on GVD in a radioactive waste control room. Method: The experiment was conducted for 22 male participants (age: mean = 37, SD = 6.7; visual acuity: over 0.8) who were recruited by considering demographic characteristics of current control room operators. Eight combinations of background and text colors were considered and the minimum legible text size was determined for each combination by applying the method of limits, one of psychophysical methods. Results: The minimum legible text size was significantly different in accordance with the combination of background and text colors. Statistical analysis results showed that luminance contrast and color contrast between background and text influenced the minimum legible text sizes. Conclusion: This study concluded that the minimum legible text size is 8 minute of arc for various combinations of background and text colors. Application: The minimum legible text size identified in the present study can be utilized in designing visual information on GVD at the main control room in a radioactive waste facility.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.109-119
• /
• 2003

o In order to start SIP Project .Marketing (& ASIC team) should present biz planning, schedule, device/SIP specs., in SIP TFT prior to request SIP development for package development project. .In order to prevent (PCB) revision, test, burn-in, & quality strategy should be fixed by SIP TFT (PE/Test, QA) prior to request for PKG development. .Target product price/cost, package/ test cost should be delivered and reviewed. o Minimum Information for PCB Design, Package Size, and Cost .(Required) package form factor: size, height, type (BGA, QFP), Pin count/pitch .(Estimated) each die size including scribe lane .(Estimated) pad inform. : count, pitch, configuration(in-line/staggered), (open) size .(Estimated) each device (I/O & Core) power (especially for DRAM embedded SIP) .SIP Block diagram, and net-list using excel sheet format o Why is the initial evaluation important\ulcorner .The higher logic power resulted in spec. over of DRAM Tjmax. This caused business drop longrightarrow Thermal simulation of some SIP product is essential in the beginning stage of SIP business planning (or design) stage. (i.e., DRAM embedded SIP) .When SIP is developed using discrete packages, the I/O driver Capa. of each device may be so high for SIP. Since I/O driver capa. was optimized to discrete package and set board environment, this resulted in severe noise problem in SIP. longrightarrow In this case, the electrical performance of product (including PKG) should have been considered (simulated) in the beginning stage of business planning (or design).

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.3
• /
• pp.254-260
• /
• 2002

In this study, two types of mobile robotic systems using NDT (Non-destructive testing) method are developed for automatic diagnosis of the boiler tubes and large size pipelines. The developed mobile robots crawl the outer surface of the tubes or pipelines and detect in-pipe defects such as pinholes, cracks and thickness reduction by corrosion and/or erosion using EMAT (Electro-magnetic Acoustic Transducer). Automation of fault detection by means of mobile robotic systems for these large-scale structures helps to prevent significant troubles without danger of human beings under harmful environment.