• 한국재료학회지
• /
• 제12권12호
• /
• pp.941-946
• /
• 2002

Both Cu and Cu-oxide nanopowders have great potential as conductive paste, solid lubricant, effective catalysts and super conducting materials because of their unique properties compared with those of commercial micro-sized ones. In this study, Cu and Cu-oxide nanopowders were prepared by Pulsed Wire Evaporation (PWE) method which has been very useful for producing nanometer-sized metal, alloy and ceramic powders. In this process, the metal wire is explosively converted into ultrafine particles under high electric pulse current (between $10^4$ and $10^{ 6}$ $A/mm^2$) within a micro second time. To prevent full oxidations of Cu powder, the surface of powder has been slightly passivated with thin CuO layer. X-ray diffraction analysis has shown that pure Cu nanopowders were obtained at $N_2$ atmosphere. As the oxygen partial pressure increased in $N_2$ atmosphere, the gradual phase transformation occurred from Cu to $Cu_2$O and finally CuO nanopowders. The spherical Cu nanopowders had a uniform size distribution of about 100nm in diameter. The Cu-oxide nanopowders were less than 70nm with sphere-like shape and their mean particle size was 54nm. Smaller size of Cu-oxide nanopowders compared with that of the Cu nanopowders results from the secondary explosion of Cu nanopowders at oxygen atmosphere. Thin passivated oxygen layer on the Cu surface has been proved by XPS and HRPD.

• 한국어병학회지
• /
• 제21권3호
• /
• pp.271-278
• /
• 2008

The epidemiological study was performed to survey the prevalence of 5 bacterial, 6 viral and 5 parasitic disease of cultured olive flounder, Paralichthys olivaceus in Pohang, Ulsan∙Gijang, Keoje and Wando area of Korea from February to December, 2007. The disease frequency of size groups were as follows; Among the 1,218 fish samples, less than 10 cm (67.6%), 11~20 cm (70.2%), 21~30 cm (73.4%), 31~40 cm (77.6%), above 41 cm (88.2%). The highest detection rates of pathogens were recorded in samples from August and Ulsan. The detection rates of parasites, bacteria or viruses were 43.2%, 38.8% and 24.4%, respectively. The distribution of specific diseases showed that detection rates of diseases occurring the most frequently during the study period were Trichodina (33.1%), viral nervous necrosis virus (16.0%), Vibrio (9.7%), Scutica (10.1%), Ichthyobodo (5.7%).

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.13-17
• /
• 2016

It is highlighted that increasing the adsorbent surface area on volumetric basis is very important in providing an easy access for gas molecules. Fine particles around $3{\mu}m$ of soft-burned dolomite kiln dust (SB-DKD) were hydrated to wet slurry samples by ball mill process and then placed in a chamber to use spray dryer method. Spherical granules with particle size distribution of $50{\sim}60{\mu}m$ were prepared under the experimental condition with or without addition of a pore-forming agent. The relationship between bead size of the pore-forming agent and size of SB-DKD particles is the most significant factor in preparation of spherical granules with a high porosity. Whereas addition of smaller beads than SB-DKD resulted in almost no change in the surface porosity of spherical granules, addition of larger beads than SB-DKD contributed to obtaining of the particles with both 15 times larger average pore volume and 1 order of magnitude larger porosity. It is considered that spherical granules with improved $N_2$ gas adsorption ability may also be utilized for other atmospheric gas adsorption.

• Korean Chemical Engineering Research
• /
• 제60권2호
• /
• pp.295-299
• /
• 2022

본 논문에서는 범퍼 스키드 플레이트 및 아웃사이드미러 하우징 부품에 적용되는 polypropylene (PP)와 acrylonitrile styrene acrylate (ASA) 소재를 활용하여 무도장 메탈릭 소재 구현에 대해 연구하였다. 금속 효과를 극대화하기 위해 알루미늄 입자의 종류, 크기, 함량을 최적화하였고 웰드 라인을 은폐하기 위해 종횡비가 상이한 하이브리드 알루미늄 입자를 사용하였다. 또한 부품 표면에 발생되는 플로우 마크를 개선하기 위해 유동성을 제어하였으며 사출 해석을 수행하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.937-939
• /
• 2007

Carbon nanotubes (CNTs) have used as an electron field emitter of the field emission display (FED) due to their characteristics of high-electron emission, rapid response and low power consumption. However, to commercialize the FED with CNT emitter, some fundamental problems regarding life time and emission efficiency have to be solved. In this study, we investigated the $TiO_2$ coated CNT as a field emitter. $TiO_2$ nanoparticles can coated on CNT surface by chemical solution method. $TiO_2$ nanoparticles had uniform size with the average size of about 2.4 nm to 3.1 nm. Field emission performance of CNT coated with $TiO_2$ nanoparticles was evaluated and discussed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.537-541
• /
• 2001

For the development of reformation material of soft ground using the LD slag, the relation to the particle condition of LD slag and the pH behavior of slag dissolution water, extraction properties of slag, and origination of white water were investigated. When the LD slag is mixed with sea water, the pH of solution ranged between 9.47 and 10.0. On the other hand, when mixed with distilled water, the pH was about 10.4 to 12.1. For the as-received slag and the aged slag in sea water, a pH of 11.5 to 12.0 was observed when the particle size was less than 0.5mm. For the reoxidized slag in seawater, the pH of the solution was lower than 9.5 when the particle size was bigger than 0.075mm. For the aged slag and reoxidized slag, the pH of the solution remained constant when the addition ratio of sea water to the slag was higher than 500 times. The main elements dissolved from the slag were Ca and Mg ions. When the pH went over 9.0, the white water started to font which was caused by the CaCO$_3$and Mg(OH)$_2$.

• Molecules and Cells
• /
• 제41권2호
• /
• pp.103-109
• /
• 2018

Calcium ions are involved in the regulation of diverse cellular processes. Fourteen genes encoding calcium binding proteins have been identified in Dictyostelium. CBP7, one of the 14 CBPs, is composed of 169 amino acids and contains four EF-hand motifs. Here, we investigated the roles of CBP7 in the development and cell migration of Dictyostelium cells and found that high levels of CBP7 exerted a negative effect on cells aggregation during development, possibly by inhibiting chemoattractant-directed cell migration. While cells lacking CBP7 exhibited normal development and chemotaxis similar that of wild-type cells, CBP7 overexpressing cells completely lost their chemotactic abilities to move toward increasing cAMP concentrations. This resulted in inhibition of cellular aggregation, a process required for forming multicellular organisms during development. Low levels of cytosolic free calcium were observed in CBP7 overexpressing cells, which was likely the underlying cause of their lack of chemotaxis. Our results demonstrate that CBP7 plays an important role in cell spreading and cell-substrate adhesion. cbp7 null cells showed decreased cell size and cell-substrate adhesion. The present study contributes to further understanding the role of calcium signaling in regulation of cell migration and development.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2256-2258
• /
• 2005

우리는 기존의 현장몰드방식의 TMJ(Tape Molded Joint)와 부품조립방식 의 PJ(Prefabricated Joint) 보다 조립시간과 숙련도가 덜 필요한 고무몰드접속함을 탄성 및 우수한 절연특성을 가진 silicone 고무를 사용하여 조립공정과 절연특성, 탄성특성, 계면특성, 열적 특성 등을 연구하여 개발에 성공하였다. 고무 몰드 접속함은 실리콘 재료의 우수한 탄성에 의해 동일 케이블의 다양한 size에 적용이 가능하다.

• ETRI Journal
• /
• 제42권4호
• /
• pp.491-504
• /
• 2020

We present AB9, a neural processor for inference acceleration. AB9 consists of a systolic tensor core (STC) neural network accelerator designed to accelerate artificial intelligence applications by exploiting the data reuse and parallelism characteristics inherent in neural networks while providing fast access to large on-chip memory. Complementing the hardware is an intuitive and user-friendly development environment that includes a simulator and an implementation flow that provides a high degree of programmability with a short development time. Along with a 40-TFLOP STC that includes 32k arithmetic units and over 36 MB of on-chip SRAM, our baseline implementation of AB9 consists of a 1-GHz quad-core setup with other various industry-standard peripheral intellectual properties. The acceleration performance and power efficiency were evaluated using YOLOv2, and the results show that AB9 has superior performance and power efficiency to that of a general-purpose graphics processing unit implementation. AB9 has been taped out in the TSMC 28-nm process with a chip size of 17 × 23 ㎟. Delivery is expected later this year.

• 농촌계획
• /
• 제21권4호
• /
• pp.167-175
• /
• 2015

The aim of this study is to establish resident-participative primary design of integrated rural development project with master planner by setting principals of open competition and transparent decision-making about village-to-village or business-to-business unit enterprise in Onui area, Hong-seong Gun. For effective processing, software projects such as residents education and rural landscape planning are simultaneously conducted for enhancing project understanding and comprehensive development plan including related post project. Above all, competition teams for individual project were organized to establish the resident-participative primary design using survey tables of residents demand. In 6 months resident-participative processing of primary design, continuous education and visiting to advanced area are conducted in team unit. Strengthened ability of team unit can be used in management and maintenance after project development. To do this, residents with the same opinions gathered as one competition team and identified business plans such as village asset, business location, size, program, and method for land securing. Favorable decision-making process by residents who are audience in project presentation of competition team has conducted. After selecting competition teams, continuos consulting are operated for establishing operation and management for developed or remodeled facilities through repetitive education and visiting advanced area. In this process, unit project suggested by competition team are completed. Preliminary selection was conducted by experts who were entrusted by residents. After residents agreement of project main stream such as major facilities and location, final detailed cost of projects are work out. Suggested process in this study which choose the final project by residents would improve residents' voluntary participation in integrated rural development project through open competition in establishing primary design.