• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.31-36
• /
• 2014

In this paper, self-resonant characteristics of transformers were analyzed in accordance with changes of characteristics regarding to the stray capacitance, the volume of winding and the winding ratio were organized by formulas. Generally, the stray capacitance is considered as an unnecessary factor in processing transformers design as well as one of the inherent characteristics. In particular, these characteristics can be appeared clearly in the high frequency driving and Electrical resonance occurs in transformer, according to coupling with a magnetic factor at a particular frequency. In the case of high-voltage output applications, such as medical equipments, It is required to output high-voltage gain. Therefor, If Self-Resonant Characteristic is applied to High-Voltage transformer design, Not only the transformer and circuit but also related the system size can be reduced. So we propose it as one of additional high voltage transformer design methods.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3453-3458
• /
• 2011

The $Mg_xZn_{1-x}O$ thin films with the various content ratio ranging from 0 to 0.4 were prepared by sol-gel spincoating method. To investigate the effects of content ratio on the structural and optical properties of the $Mg_xZn_{1-x}O$ thin films, scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) were carried out. With increase in the content ratio, the grain size of the $Mg_xZn_{1-x}O$ thin films was increased, however, at the content ratio above 0.2, MgO particles with cubic structure were formed on the surface of the $Mg_xZn_{1-x}O$ thin films, indicating that the Mg content exceeded its solubility limit in the thin films. The residual stress of the $Mg_xZn_{1-x}O$ thin films is increased with increase in the Mg mole fraction. In the PL investigations, the bandgap and the activation energy of the $Mg_xZn_{1-x}O$ thin films was increased with the Mg mole fraction.

• Journal of Energy Engineering
• /
• v.19 no.1
• /
• pp.16-20
• /
• 2010

In present work, tin-carbon mixtures by using carbon from pyrolyzed coffee seeds were synthesized. Synthesis methods includes simple mixing and chemical mixing. X-ray diffraction pattern indicated carbon and tin mixture peaks and scanning electron microscope images showed particles size of $12{\sim}85\;{\mu}m$ and shape. Charge discharge test were carried out. Tin-carbon mixture by chemical mixing indicated higher discharge capacity of 191 mAh/g than commercial carbon black(105 mAh/g) for 15cycles. Tin-carbon mixture by simple mixing indicated similar performance to carbon black.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.1
• /
• pp.62-69
• /
• 2008

This study was conducted in order to recommend forest-based wildlife protection areas in Chung-nam Province using several basic habitat conditions. The conditions used in this study were the forest patch size with the potential to keep wildlife animals safe, the distance from water sources, and the availability of food for wildlife. The fractal dimension index was also used to find the edge line dynamics, which can influence on habitat conditions for edge species. The natural conservation management indices including a forest map (indicating the level of forest age), a slope map, and an elevation map were used to find the forest patches with enough space for wildlife to live on. Water resources and their buffer areas were considered as factors to protect the space as an ecological corridor. Deciduous trees and trees mixed with deciduous trees and conifers were chosen to provide wildlife animals their food. In total, 525 forest patches were chosen and recommended for the wildlife protection area. Five of these forest patches were recommended as wildlife protection areas managed by the provincial government. The other 520 forest patches were recommended to protect local wildlife animals and be managed by each county or city. These forest patches were located around the Geum-buk and Geum-nam mountains, and the forest patches are important resources as habitats to keep wildlife in the area. An ecological network consists of these separate forest patches with the ecological integration. A fractal dimension index was used to divide forest patches into several categories in order to find how patches are shaped. The forest patches with longer edges or more irregular shapes have a much higher possibility of being inhabited by various types of edge species. Through comparison of the wildlife protection areas recommended in this study to the current wildlife protection areas, we recognized that the current wildlife protection areas need boundary adjustments in order for wildlife animals to survive by themselves with water sources and food.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.3
• /
• pp.662-672
• /
• 2009

Obesity has increased dramatically increased in recent days. It has resulted in obesity-associated diseases and metabolic syndromes including hyperlipidemia, diabetes and cardiovascular diseases. Our study was investigated to determine the antiobese effects of mixed 2 medicinal herbs (AR+AC) in rats fed high-fat diet with an abundance of carbohydrates. Two groups of male Sprague-Dawley rats were fed different diets during 8 weeks: normal diet containing 5% corn oil (w/w), high-fat diet containing 10% (w/w) lard plus 5% (w/w) corn oil (HF). And High-fat diet group was treated with saline or 100 mg/kg ARAC or 300 mg/kg ARAC (PO). Antiobese effect was evaluated by measuring the changes of body weight, adipose tissues weight. Also we examined levels of leptin, adiponectin and lipid profiles in serum. Finally we compared morphological change in adipocytes and hepatocytes between HF and ARAC group. Mixed combination of 2 medicinal herbs, but not alone, caused significant decrease in body weight, organ weight (liver, epididymal fat, and BAT) compared with control HF group. The ARAC group had markedly lower serum levels of adiponectin when compared with HF group. Also the epididymal white adipocyte size of ARAC group were diminished comparing to the HF group. These results suggest that the possibility of ARAC combination, as an antiobese formula, by suppression of body weight gain and increased lipid profiles.

• Journal of Community Nutrition
• /
• v.4 no.1
• /
• pp.29-37
• /
• 2002

This study was designed to assess diet and health-related factors of older adults in Korea. Subjects females were 2,660 adults aged 50 and over living in Korea. Males were 847 persons and were 1813 persons. The mean weight and height for males and females were 63.8 $\pm$ 0.3kg / 164.0 $\pm$ 0.2cm and 57.0 $\pm$ 0.2kg /150.6 $\pm$ 0.1cm respectively. BMI (body mass index), body fat, and percent fat were significantly greater in females than in males. The muscle mass and body water were significantly greater in males than in females. Twenty-one percent of total subjects lived alone and 26% with spouse only. Most of the subject's self-reported income was in middle level (65%) or low level (24%). Proportion of subjects who answered 'very poor' or 'poor' on perceived health status was higher in older group. The 50-64 years old group was facing more stress than 65yr and over group. Among male subjects,38.4% were current-smokers and 22.0% were ex-smokers. But only 6.5% of female subjects were current-smokers. Males turned out to have better dietary habits-meal frequency per day, mealtime regularity, regular meal size and balanced eating-than females (p < 0.001). This study revealed that the diet and health-related factors affect nutritional status and chronic diseases of the elderly. For better management and evaluation of health status of the elderly, more effective nutritional assessment tools should be developed.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.283-289
• /
• 2018

Agricultural gear reducers are used in a variety of agricultural machinery designs such as in agricultural tractors and transport cars, and even greenhouses. For greenhouses, a gear reducer is used to control windows on the side and the roof. Gear reducers for agricultural applications are designed using the empirical method because of the lack of a standard for experimentation. Simulation is necessary for the optimal design of an agricultural gear reducer. There are many advantages to this optimization such as low-cost maintenance, reduced size, and weight. In this study, bending and contact safety factor simulation for the gear reducer of a greenhouse was conducted by decreasing the face widths of helical gear shaft 2 and shaft 3 from 30.8 and 30 mm, respectively, at an interval of 4 mm. The bending and contact safety factors were calculated using AGMA standard. Simulation results showed that bending and contact safety factors decreased rapidly when the face width of the helical gear on shaft 2 was 30 mm and the face width of helical gear on shaft 3 decreased from 30.8 mm to 26.8 mm, suggesting that it would be safe to reduce the face width of the helical gear on shaft 3 to 26.8 mm. The reduction of the face width also reduced the weight of the agricultural gear. This study suggests that the agricultural gear reducer safety factor decreases as the face width decreases.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.515-520
• /
• 2007

Recently, the treat of sludge is usually progressed by ocean disposal. But it will be totally banned by content of its heavy metal according to London Dumping Convention, gradually. The stable way of treat of sewage sludge should be examined urgently. To solve the problem, recently, there are efficient and environment-oriented method. One of them is to produce absorbent through the activation. This study produces absorbent through steam activation. As basic experiment, optimum activation condition for preparation of good absorbent is researched through study of the fellowing variables : steam flow rate, activated temperature, activation time. As the result of this with standard on iodine adsorptivity, it is chosen, that steam flow rate "30 mL/hr", activation temperature $"500^{\circ}C"$, activation time "60 minutes". At the time, iodine adsorptivity and yield shown that 228.4 mg/g, 77.23%. And also, by using nitrogen adsorption, SEM and EDS are confirmed that pore development, specific surface area, mean pore size, chemical component and content. Pore developed by steam activation is also confirmed that it is micropore.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.506-512
• /
• 2018

Unmanned aerial vehicles(UAVs) operating in the military for various purposes are designed to transmit information collected according to the purpose to GCS(Ground Control System), and to transmit/receive the vehicle's operational control and status information using wireless communication(or datalink). Currently, the military UAV systems in operation in Korea use unique communication methods, protocols, and message structures for each system. Among these, the Division UAV is designed to transmit fixed size TM/TC data repeatedly and the Corps UAV is designed to transmit aperiodic TM/TC data to the variable length of the message-based. In this paper, we analyze the TM/TC data protocol of existing military UAV systems and present data protocol design method which is considered to be more efficient in wireless communication environment applied to equipment under development. And we will discuss issues to be considered for standardization of technology for ensuring interoperability with many UAVs or newly introduced UAV systems.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.820-824
• /
• 2014

TiNOx multi-layer thin films on aluminum substrates were prepared by DC reactive magnetron sputtering method. 4 multi-layers of $TiO_2$/TiNOx(LMVF)/TiNOx(HMVF)/Ti/substrate have been prepared with ratio of Ar and ($N_2+O_2$) gas mixture. $TiO_2$ of top layer is anti-reflection layer on double TiNOx(LMVF)/TiNOx(HMVF) layers and Ti metal of infrared reflection layer. In this study, the crystallinity and surface properties of TiNOx thin films were estimated by X-ray diffraction(XRD) and field emission scanning electron microscopy(FE-SEM), respectively. The grain size of TiNOx thin films shows to increase with increasing sputtering power. The composition of thin films has been investigated using electron probe microanalysis(EPMA). The optical properties with wavelength spectrum were recorded by UV-Vis-NIR spectrophotometry at a range of 200~1,500 nm. The TiNOx multi-layer films show the excellent optical performance beyond 9% of reflectance in those ranges wavelength.