• 정보처리학회논문지D
• /
• 제10D권7호
• /
• pp.1127-1136
• /
• 2003

소프트웨어 개발 초기에 개발비용, 소요 인력과 기간을 추정하는 것은 소프트웨어공학 분야의 주요한 요소이며, 어려운 문제이다. 소프트웨어 개발 소요 인력을 추정하기 위한 대부분의 모델들은 소프트웨어 요구사항 명세서로부터 측정된 기능점수를 이용하였다. 본 논문은 기능점수에 기반하여 프로젝트에 대한 가장 실제적이고 생산적인 팀 규모와 개발기간을 선택하는 지침으로 사용될 수 있는 정보를 제공하기 위해 생산성 척도와 비용 척도를 도입하였다. 소프트웨어 개발과 유지보수를 수행한 300개 프로젝트 데이터 집합을 2개의 서브 그룹인 개발 프로젝트와 유지보수 프로젝트로 분류하였다. 생산성과 비용 측도 기준에 의해 분석한 결과 작은 팀 규모와 최소한의 개발기간이 소요되었을 때, 프로젝트가 성공적으로 수행됨을 보였다. 또한, 연구 결과에 근거하여 기능점수 규모에 따른 개발팀의 규모와 개발기간을 추정할 수 있는 모델을 제안하였다. 본 제안 모델은 소프트웨어 규모에 따라 필요한 개발팀의 규모와 개발기간 평가 기준을 제공한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권2호
• /
• pp.100-105
• /
• 2004

The influencing factors on the OPC (optical proximity correction) results are quantitatively analyzed using OPCed L/S patterns. ${\sigma}$ values of proximity variations are measured to be 9.3 nm and 15.2 nm for PR-A and PR-B, respectively. The effect of post exposure bake condition is assessed. 16.2 nm and 13.8 nm of variations are observed. Proximity variations of 11.6 nm and 15.2 nm are measured by changing the illumination condition. In order not to seriously deteriorate the OPC, these factors should be fixed after the OPC rules are extracted. Proximity variations of 11.4, 13.9, and 15.2 nm are observed for the mask mean-to-targets of 0, 2 and 4 nm, respectively. The decrease the OPC grid size from 1 nm to 0.5 nm enhances the correction resolution and the OCV is reduced from 14.6 nm to 11.4 nm. The enhancement amount of proximity variations are 9.2 nm corresponding to 39% improvement. The critical dimension (CD) uniformity improvement for adopting the small grid size is confirmed by measuring the CD uniformity on real SRAM pattern. CD uniformities are measured 9.9 nm and 8.7 nm for grid size of 1 nm and 0.5 nm, respectively. 22% improvement of the CD uniformity is achieved. The decrease of OPC grid size is shown to improve not only the proximity correction, but also the uniformity.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.170-174
• /
• 2009

$BaTiO_3$ powder was synthesized by the solid-state reaction of fine $BaTiO_3$ and $TiO_2$ raw materials. Fine grinding media of 50 and 300 microns were used for obtaining fine particulate mixture of $BaTiO_3$ and $TiO_2$ with high homogeneity. Effect of the size of grinding media on the synthesis mechanism of $BaTiO_3$ was discussed on the basis of the particulate morphology and thermogravimetry data for the mixture powders. By using the finer grinding media, $BaTiO_3$ was formed at the lower temperature and the particle size with the relatively narrower distribution could be obtained. $BaTiO_3$ powder with the average size of 100 nm was synthesized by the solid reaction in vacuum atmosphere.

• 정보처리학회논문지D
• /
• 제10D권1호
• /
• pp.77-84
• /
• 2003

팀의 규모에 관한 연구 결과 전문가들은 일반적으로 업무를 수행하는데 규모가 작은 팀이 큰 팀 보다 좋다는데 동의하고 있다. 또한, 항상 최소한의 실질적인 팀 규모를 구성하는데 목표로 하고 있다. 그러나 "작은"이 얼마를 의미하는지가 문제가 된다. 본 논문에서는 프로젝트 인도율과 인도속도와 같은 생산성 측도를 도입하여 이상적인 팀 규모를 결정하였다 300개 프로젝트를 대상으로 데이터 집합을 2개의 서브 그룹인 개발 프로젝트와 유지보수 프로젝트로 분류하였다. 실험결과 가장 성공적인 프로젝트는 최대 5명으로 수행하는 경우였으나, 본 논문은 실제 개발 된 프로젝트들을 대상으로 생산성-기반 이론을 접목시켜 이상적인 팀 규모를 판단하는 지침을 제공한다. 지침을 제공한다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.298-298
• /
• 2022

Milling is an important process that determines the quality of flour and is affected by milling machine type, scale, and tempering conditions. In addition, seed hardness is an important factor in determining the amount of tempering water and has been reported to affects flour yield and flour quality. There are reports that vitreousity is used as a measure to distinguish between soft and hard seeds, and the higher the vitreousity, the higher the protein contents. However, there is no established system for measuring viterousity of seeds and studies on the vitreousity and quality characteristics of flour are insufficient. Therefore, in this study, vitreousity, hardness, and milling characteristics were evaluated for 46 major domestic varieties, and their relationship was confirmed. After cutting the seeds using a seed cutter, vitreousity was measured, and seed hardness and flour particle size was measured using SKCS and PSI, respectively. As for the seed hardness index, 'Joa' was the lowest with 11.6, 'Yeonbaek' was the highest with 78.7. As for the milling yield, 'Saeol' had the lowest at 58.1%, and 'Hcjoong' had the highest at 88.6%. Seed hardness index and wheat flour production showed a high positively correlation, showing a similar to that of previous studies. Also, in flour particle size, 'Gobun' was the largest at 75.5 pm, and 'Joa' was the smallest at 43.1 um. Flour yield and flour particle size showed a high positively correlation. As a result of vitreousity, 'Hwangeumal' (55.2%), 'Saekeumkang' (59.1%), 'Baekkang' (52.3%), 'Goso' (44.6%), and 'Joa' (19.2%) were showed. Seed hardness and vitreousity showed a high positively correlation. Also as the vitreousity increased, the flour yield also showed a tendency to increase. In addition, as the seed hardness increased, particle size of the flour yield also showed a tendency to increase. It is thought that this result can be used as a measure to determine the quality of flour with vitreousity. However, further analysis of wheat varieties and methods of analyzing vitreousity are needed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권2호
• /
• pp.121-129
• /
• 2011

It is progressing as new advents and remarkable developments of mobile device every year. On the upper line reason, NAND FLASH large density memory demands which can be stored into portable devices have been dramatically increasing. Therefore, the cell size of the NAND Flash memory has been scaled down by merely 50% and has been doubling density each per year. [1] However, side effects have arisen the cell distribution and reliability characteristics related to coupling interference, channel disturbance, floating gate electron retention, write-erase cycling owing to shrinking around 20nm technology. Also, FLASH controller to manage shrink effect leads to speed and current issues. In this paper, It will be introduced to solve cycling, retention and fail bit problems of sub-deep micron shrink such as Virtual negative read used in moving read, randomization. The characteristics of retention, cycling and program performance have 3 K per 1 year and 12.7 MB/s respectively. And device size is 179.32 $mm^2$ (16.79 mm ${\times}$ 10.68 mm) in 3 metal 26 nm CMOS.

• Industrial Engineering and Management Systems
• /
• 제11권2호
• /
• pp.196-201
• /
• 2012

This study has developed a packaging criterion to minimize the level of discomfort which drivers using their vehicles for daily life purposes may experience due to ill designed vehicle packaging of mid-size sedan based on users' daily-life scenario. To find out optimal range of packaging dimension criterion, discomfort levels the test participants with different physical conditions suffer while performing various activities were analyzed. One hundred two test participants were carefully selected to represent entire Korean mid-size sedan owner-drivers. They were directed to test drive on the course designed to simulate mid-size sedan daily-usage scenario. At pre-designed locations, each of questions was asked to the test participants to be answered in the form of 10 point discomfort level score. By analyzing the test results, the optimal range for packaging dimensions was defined to be used as a packaging criterion.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제29권12호
• /
• pp.873-882
• /
• 2002

소프트웨어 개발 초기에 개발비용, 소요인력과 기간을 추정하는 것은 소프트웨어공학 분야에서 어렵고도 중요한 문제이다. 이 정보들은 소프트웨어 요구사항 명세서로부터 측정된 소프트웨어 규모인 기능점수를 이용하여 추정한다. 측정된 소프트웨어 규모를 개발하기 위해서는 개발팀을 몇 명으로 구성할 것인가가 문제로 제기된다. 본 논문은 소프트웨어 개발팀의 규모를 추정할 수 있는 모델을 제시한다. 모델을 유도하기 위해 301개 소프트웨어 프로젝트들이 사용되었다. 먼저, 통계적 알고리즘 모델인 회귀모델을 연구하였다. 다양한 데이타 변환과 회귀분석 결과 좋은 성능의 모델을 얻지 못하였다. 따라서, 비알고리즘 모델인 RBF망을 적용하여 잔차가 랜덤하게 분포하고 우수한 성능을 가진 모델을 제안하였다. 본 모델은 소프트웨어 개발에 필요한 개발팀 규모에 대한 기준을 제공함으로써 인력관리 정보로 활용할 수 있다.

• 대기
• /
• 제31권5호
• /
• pp.511-523
• /
• 2021

This study explores the optimal ensemble size to improve the prediction performance of the Korea Meteorological Administration's operational climate prediction system, global seasonal forecast system version 5 (GloSea5). The GloSea5 produces an ensemble of hindcast data using the stochastic kinetic energy backscattering version2 (SKEB2) and timelagged ensemble. An experiment to increase the hindcast ensemble from 3 to 14 members for four initial dates was performed and the improvement and effect of the prediction performance considering Root Mean Square Error (RMSE), Anomaly Correlation Coefficient (ACC), ensemble spread, and Ratio of Predictable Components (RPC) were evaluated. As the ensemble size increased, the RMSE and ACC prediction performance improved and more significantly in the high variability area. In spread and RPC analysis, the prediction accuracy of the system improved as the ensemble size increased. The closer the initial date, the better the predictive performance. Results show that increasing the ensemble to an appropriate number considering the combination of initial times is efficient.

• 한국추진공학회지
• /
• 제17권5호
• /
• pp.18-26
• /
• 2013

AP 기반의 혼합형 열가소성 고체 추진제의 연소 억제 방안과 그 효과를 제시하였다. 입자 사이즈가 다른 AP를 적용한 효과와 0.5%~2.0%의 LiF가 미치는 영향을 분석하기 위해 PEBAX/AP 열가소성 고체 추진제에 대한 지상연소 시험을 통해 연소속도 및 압력 지수를 산출한 후 비교 분석하였다. 분석결과, 큰 AP 입자 사이즈를 적용하는 것과 2.0% 이내의 LiF 첨가는 연소속도를 감소시키는 효과를 보였으며 본 논문에서는 이에 대한 각각의 영향을 정량적으로 제시하였다.