• 한국공간구조학회논문집
• /
• 제4권3호
• /
• pp.93-101
• /
• 2004

구조시스템은 역사적으로 발달해온 기술적 배경에 따라 건축에 사용되었고, 구조의 역할도 변화되어 왔다. 그러므로 다양한 구법으로 이루어지는 연성구조시스템의 건립사례와 시기에 따라 건립된 규모를 조사함으로써 여러 연성구조형식의 a성을 고찰하고 연성구조의 전개방향을 모색하였다. 그 결과, 연성구조시스템은 초기에 여러 케이블구조로 발달하기 시작하였으나 1970년대 이후부터는 막구조가 주로 사용되고 있는 것으로 나타났다 또한 초기의 케이블 구조시스템들은 대공간 건축에 주로 사용되었으나, 1970년 이후에는 중소규모의 건축물에 사용되는 경향이 있으며, 격자형 케이블구조나 공기막구조 그리고 돔 형식의 들림형 하이브리드 막구조가 대형공간으로 발달하는 경향을 보이는 것으로 나타났다.

• 한국항만학회지
• /
• 제8권1호
• /
• pp.41-47
• /
• 1994

The present paper discusses the nonlinear wave deformation due to a submerged coastal structure. Theory is based on the frequency-domain method using the third order perturbation and boundary integral method. Theoretical development to the second order perturbation and boundary integral method. Theoretical development to the second order Stokes wave for a bottom-seated submerged breakwater to the sea floor is newly expanded to the third order for a submerged coastal structure shown in Figure 1. Validity is demonstrated by comparing numerical results with the experimental ones of a rectangular air chamber structure, which has the same dimensions as that of this study. Nonlinear waves become larger and larger with wave propagation above the crown of the structure, and are transmitted to the onshore side of the structure. These characteristics are shown greatly as the increment of Ursell number on the structure. The total water profile depends largely on the phase lag among the first, second and third order component waves.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.11-19
• /
• 2014

Modern systems development becomes more and more complicated due to the need on the ever-increasing capability of the systems. In addition to the complexity issue, safety concern is also increasing since the malfunctions of the systems under development may result in the accidents in both the test and evaluation phase and the operation phase. Those accidents can cause disastrous damages if explosiveness gets involved therein such as in weapon systems development. The subject of this paper is on how to incorporate safety requirements in the design of safety-critical systems. As an approach, a useful system structure using the method of design structure matrix (DSM) is studied while reflecting the need on systems safety. Specifically, the effects of system components failure are analyzed and numerically modeled first. Also, the system components are identified and their interfaces are represented using a component DSM. Combining the results of the failure analysis and the component DSM leads to a modified DSM. By rearranging the resultant DSM, a modular structure is derived with safety requirements incorporated. As a case study, application of the approach is also discussed in the development of a military UAV plane.

• 한국주거학회논문집
• /
• 제15권3호
• /
• pp.43-51
• /
• 2004

The purpose of this study is to examine the physical characteristics of the detached housing area in the housing site development district. The process of this study is to investigate the characteristics of the physical structure and the building use, then to analyze the relationship of physical structure and the building use in the aspect of the morphological characteristics. The case study focuses on the Chil-kok2, An-Siml in Taegu. The streets pattern is composited gird and loop type mixed. The block is composited by 2 lots in general. But the obscurity of organization and character of the streets, the size and shape of lots which is not fit to the building use. A whole residential characters appears high residential density ratio. so residential environment became worse. The improving level of residential environment and efficiency of land use in the detached housing area of the housing site development district, firstly the propriety of the physical structure must be considered about detached house characters, and the housing uses which fit to the physical structure are needed, and also for the concrete realization of this, the designation of district, the zoning of residential area, the guideline of the district design, and establishment of comprehensive master planning in detached housing area are needed in aspect of the housing policy. As the result of this study, it suggests several design guideline to improve housing site development.

• 한국자기공명학회논문지
• /
• 제1권1호
• /
• pp.71-77
• /
• 1997

Substritenone B, sesterterpenoids of an unprecedented akeletal class, has been isolated from the Antarctic sponge Suberites sp. Structure of this compound has been determined by combined spectral and chemical studies.

• 농촌계획
• /
• 제3권2호
• /
• pp.90-101
• /
• 1997

The objectives of the study are to identify the issues and problems encountered in Korea's current integrated rural regional development(IRRD) program and to suggest policy remedies to cope with them. Secondary data and materials ate mainly used for the study. Since the mid-1980s, rural settlement planning has been carried out in the Republic of Korea, In the planning process,'scale of economy'perspectives and settlement policy have been emphasized for increasing the efficiency of investment. During the 1990s, rural settlement and major village development projects have been implemented under the rural structure transformation programs. Agricultural structure adjustment projects for land consolidation and sizable farming have been separated from the rural settlement and mojor village development projects. Based on the evaluative analysis for the rural structure transformation policy and program, some problematic issues were raised as follows: (a) lack of integrative control function in the program'(b) weak linkage between living environment improvement and agricultural development projects: and (c) lack of comprehensive village development planning and implementation system. The policy issues to solve the problems were suggested as follows: (a) adoption of bottom-up approach in new IRRD planning and project system : (b) projection of comprehensive development planning and project at the village level; and (c) introduction of new regional agriculture development projects such as direct payment system for farming in less favorable areas and organic farming.

• 한국토양비료학회지
• /
• 제44권3호
• /
• pp.517-526
• /
• 2011

Soil structure plays an important role in ecological system, since it controls transport and storage of air, gas, nutrients and solutions. The study of soil structure requires an understanding of the interrelations and interactions between the diverse soil components at various levels of organization. Investigations of the spatial distribution of pore/particle arrangements and the geometry of soil pore space can provide important information regarding ecological or crop system. Because of conveniences in image analyses and accuracy, these investigations have been thrived for a long time. Image analyses from soil sections through impregnated blocks of undisturbed soil (2 dimensional image analyses) or from 3 dimensional scanned soils by computer tomography allow quantitative assessment of the pore space. Image analysis techniques can be used to classify pore types and quantify pore structure without inaccurate or hard labor in laboratory. In this paper, the last 50 years of the soil image analyses have been presented and measurements on various soil scales were introduced, as well. In addition to history of image analyses, a couple of examples for soil image analyses were displayed. The discussion was made on the applications of image analyses and techniques to quantify pore/soil structure.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.215-221
• /
• 2017

An electromagnetic (EM) wave absorber reduces the possibility of radar detection by minimizing the radar cross section (RCS) of structures. In this study, a radar absorbing structure (RAS) was applied to the leading edge of a blended wing body aircraft to reduce RCS in X-band (8.2~12.4GHz) radar. The RAS was composed of a periodic pattern resistive sheet with conductive lossy material and glass-fiber/epoxy composite as a spacer. The applied RAS is a multifunctional composite structure which has both electromagnetic (EM) wave absorbing ability and load-bearing ability. A two dimensional unit absorber was designed first in a flat-plate shape, and then the fabricated leading edge structure incorporating the above RAS was investigated, using simulated and free-space measured reflection loss data from the flat-plate absorber. The leading edge was implemented on the aircraft, and its RCS was measured with respect to various azimuth angles in both polarizations (VV and HH). The RCS reduction effect of the RAS was evaluated in comparison with a leading edge of carbon fabric reinforced plastics (CFRP). The designed leading edge structure was examined through static structural analysis for various aircraft load cases to check structural integrity in terms of margin of safety. The mechanical and structural characteristics of CFRP, RAS and CFRP with RAM structures were also discussed in terms of their weight.

• 한국수산과학회지
• /
• 제39권spc1호
• /
• pp.223-230
• /
• 2006

We investigated the spring and summer community structure of meiobenthos in a tidal-falt near Iwon, Korea, in 2002 and 2003. In total, 12 meiofaunal groups were found in the study area among which nematodes were the most dominant. Benthic foraminiferans, harpacticoid copepods, polychaetes, and crustacean nauplli were also dominant groups at all sites. The total density of meiobenthos at each station was be 246-2,177 ind./$10cm^2$. As the depth of sediment increased, the density of meiobenthos at each station gradually decreased. Changes in the vertical distribution of meiobenthos in the study area occurred mainly near the sediment surface (0-1 cm). Generally, between spring and summer the density of nematodes increased, and the density of other dominant meiofaunal groups (benthic harpacticoids, crustacean nauplii, benthic foraminiferans) decreased near the sediment trap the control site of sediment traps compared to that at the control site. The results of cluster and multidimensional scaling plots indicate that the meiofaunal community changed following construction of a low artificial wood groin structure.

• Journal of information and communication convergence engineering
• /
• 제8권1호
• /
• pp.95-98
• /
• 2010

The Electro Magnetic (EM) Acceleration and Deceleration (ACC/DCC) system of the Ferromagnetic Ball(FB) is the linear motor's final structural development which can be used for devices that conserve energy, gaming or rail gun. By accelerating the FB within the coil structure, it is difficult to utilize the FB's magnetizing feature via the ACC/DCC system. There is much monopole space inside the monopole coil. By using this particular feature of the FB, starting coil and Monopole Coil Structure (MCS) can be structurally separated and another simple electric related control system can be experimented for further development. For the purpose of development a review is needed of the control system of both basic stepper motor and BLDC motor.