• Carbon letters
• /
• v.10 no.3
• /
• pp.181-189
• /
• 2009

Activated carbon spheres (ACS) were prepared at different heating rates by carbonization of the resole-type phenolic beads (PB) at $950^{\circ}C$ in $N_2$ atmosphere followed by activation of the resultant char at different temperatures for 5 h in $CO_2$ atmosphere. Influence of heating rate on porosity and temperature on carbon structure and porosity of ACS were investigated. Effect of heating rate and temperature on porosity of ACS was also studied from adsorption isotherms of nitrogen at 77 K using BET method. The results revealed that ACS have exhibited a BET surface area and pore volume greater than $2260\;m^2/g$ and $1.63\;cm^3/g$ respectively. The structural characteristics variation of ACS with different temperature was studied using Raman spectroscopy. The results exhibited that amount of disorganized carbon affects both the pore structure and adsorption properties of ACS. ACS were also evaluated for structural information using Fourier Transform Infrared (FTIR) Spectroscopy. ACS were evaluated for chemical composition using CHNS analysis. The ACS prepared different temperatures became more carbonaceous material compared to carbonized material. ACS have possessed well-developed pores structure which were verified by Scanning Electron Microscopy (SEM). SEM micrographs also exhibited that ACS have possessed well-developed micro- and meso-pores structure and the pore size of ACS increased with increasing activation temperature.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.964-973
• /
• 2008

In this study, a short-wavelength coplanar-type transmission line employing periodic ground structure (PGS) was developed for application to miniaturized on-chip passive component on Si Radio Frequency Integrated Circuit (RFIC). The transmission line employing PGS showed shorter wavelength and lower characteristic impedance than conventional coplanar-type transmission line. The wavelength of the transmission line employing PGS structure was 57 % of the conventional coplanar-type transmission line on Si substrate. Using the theoretical analysis. basic characteristics of the transmission line employing PGS (e.g., bandwidth. loss, impedance, and resonance characteristics) were also investigated in order to evaluate its suitability for application to a development of miniaturized passive on-chip components on silicon RFIC. According to the results. the bandwidth of the transmission line employing PGS was more than 895 GHz as long as T is less than 20${\mu}m$, and the resonance characteristic was observed in 1239 GHz, which indicates that the PPGM structure is a promising candidate for application to a development of miniaturized on-chip passive components on Si RFIC.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1609-1613
• /
• 2003

This research focused on the development of automatically exclusive production equipment of corrupad as changing manual system into automatic system to increase the output. Therefore the minimization of the problem of the rewinding mechanism with eccentric cantilever structure is key to the achievement of the high performance for automation production. Proto-type corrupad rewinding machine is manufactured after considering the effect of the rotational vibration and natural frequency of the structure of machine by using 3D design packages such as ADAMS and I-deas. For evaluating the performance of the proto-type machine, simulations of dynamic and static characteristics using 3D design packages, a series of modal tests by accelerometer and measurements of dynamic behavior by high-speed camera for rewinding part, were carried out. As a result, the proto-type machine was not affected with the rotational vibration. Whirling error of eccentric cantilever structure in driving is small. Therefore the machine developed is most suitable to produce corrupad automatically. However reinforcement of the structure in axial direction is required due to so vibration in that direction.

• Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.295-301
• /
• 2011

We investigated the genetic structure of Korean and Japanese ayu Plecoglossus altivelis populations by examining 669 individuals from 14 populations using three microsatellite loci. Genetic variation did not differ significantly among the populations examined in terms of allelic number and heterozygosity. Korean populations were genetically close to each other, implying that persistent gene flow has occurred in these populations. This suggests that eastern populations in Korea form a single large population and all of the Korean populations are distinct from the Japanese populations. Pairwise population $F_{ST}$ estimates, principal component analyses, and a neighbor-joining tree showed that genetic separation between the southern and pooled eastern coast populations was probably influenced by restricted gene flow. Hierarchical analysis of molecular variance (AMOVA) revealed a weak but significant genetic structure among three ayu groups (eastern and southern coasts of Korea and the Japan coast), and no genetic variation within groups. The estimated genetic population structure and potential applications of microsatellite markers may aid in the proper management of ayu populations.

• Industrial Engineering and Management Systems
• /
• v.9 no.3
• /
• pp.215-226
• /
• 2010

Since product design strongly depends on the experience and ability of the designers, and a long lead time is required for the product design stage, introducing a support system related to this experience and ability is an effective technique to reduce the lead time. In this paper, an information system is developed to support the development of engineering mechanisms with the evaluation of the assembly process on the basis of the abstract functions required for new products. The developed system is based on a database system involving the following data structure: (1) a hierarchical structure related to information about the product functions, (2) the relationship between the parts and engineering functions and/or mechanisms of products, and (3) the relationship between the parts and manufacturing characteristics. The system stores the relationships between the product functions, structure of parts, and assembly characteristics. This information can then be interactively retrieved using the data structure described in (1), (2), and (3). A procedure for designing new products is proposed that involves using the information about existing products. This paper presents the characteristics of the proposed procedure and the developed information system. In addition, a case study of the redesign of a simple structured robot by using the proposed procedure is discussed.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.30 no.4
• /
• pp.5-27
• /
• 2019

The purpose of this study is to present the direction of development of menu structure of museum web site through menu structure and content analysis of domestic museum web sites. To this end, menu structure was divided into content areas for 27 national, public, and university museums in Korea and analyzed in terms of organizing system, labeling system, and navigation system, which are components of information architecture. The results of the study suggested continuous management, including hierarchy of appropriate width and depth, use of clear and consistent labels, provision of collection search functions and updating the status of collections, and correction of web site errors, in the direction of development.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.10
• /
• pp.1061-1068
• /
• 2013

In this research, the design optimization of a composite sandwich has been performed for using as an airplane wing skin. Automated analysis framework for aero-structure interaction is used for calculating load data on the wing. For automated analysis framework, FLUENT is used for computational fluid dynamics (CFD) analysis. CFD mesh is generated automatically by using parametric modeling of CATIA and GAMBIT. A computational structure mechanics (CSM) mesh is generated automatically by the parametric method of the CATIA and visual basic script of NASTRAN-FX. The structure is analyzed by ABAQUS. Composite sandwich optimization is performed by NASTRAN SOL200. Design variables are thicknesses of the sandwich core and composite skin panel plies. The objective is to minimize the weight of the wing and constraints are applied for wing tip displacement, global failure index and local failure indexes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.456-463
• /
• 2018

With the development of weapon systems by mounting various sensors, it makes important to analyze the precise functioning of sensor to external environment. In the case of small arms with magnetic sensor, the malfunction of small arms might be caused by strong external magnetic fields. In this study, the effects of magnetic sensor on external magnetic fields were analyzed, and optimal magnetic shield and shield structure were designed through M&S. In addition, the magnetic-shielding effectiveness of magnetic sensor in small arms was verified with commercial shielding materials. As a result, it was demonstrated that the Fe-Cu-Si-Nd-B with the structure of multi-layer metallic shields was shown the magnetic-shielding effectiveness of 83 % for an external permanent magnet and 19 % for an alternating magnetic field of 180 dBpT at 60 Hz, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.716-723
• /
• 2019

It is crucial to understand the characteristics of cloud occurrence frequency for development of high precision guided missile using infrared imaging sensor. In this paper, we investigated the vertical structure of cloud for altitude using upper-air observation data. We find that cloud occurrence frequency is high at altitudes of 1.3 km and 9.5 km. Theses features have seasonal and temporal dependency. In the summer, cloud often occur more than average regardless of altitude. In the winter, low clouds occur frequently, and high clouds do not occur well. In temporal characteristics, clouds occur more frequently in daytime than in nighttime regardless of altitude. Many of clouds exist in single layer or double layers in the air. We also find that the 40 % of cloud occurrence frequency at high altitude when low clouds under altitude of 2 km cover entire sky.

• Journal of Korea Society of Industrial Information Systems
• /
• v.2 no.1
• /
• pp.177-201
• /
• 1997

In this paper, a model of cost evaluatino for computer software development is proposed . This model is designed to cope with various development environment since the development cost is directly dependent on the development environments. The model that satisfies the users request is turned out to be a function point model. For the future research , a model that contain new technique and new development environment and an imaginative model are desired . Also, in order to effective cost estimation a systematic research on structure of software development , establishment of standard development methodology, project management and technique are desired.