• 한국수산과학회지
• /
• 제39권spc1호
• /
• pp.132-141
• /
• 2006

Artificial structures have been designed as pilot structures to promote the creation and restoration of tidal flats. However, little information is available as to whether such artificial construction affects the macrobenthic community structure. We monitored the variation of the macrobenthic community structure and species composition near natural and artificial structures (seaweed and a timber fence) on the tidal flats near the Iwon Dike, Korea. In total, 137 macrobenthic species were recorded during this study, predominantly crustaceans (47%), polychaetes (18%), and molluscs (27%). Polychaetes comprised over 50% of the total density, followed by gastropods (38%) and crustaceans (11%). Macrobenthic species composition in the artificial and natural areas, was initially similar, but it differed after 7 months. The gastropod Umbonium thomasi, the most dominant species, was present at both sites in the first month after the start of the experiment, but disappeared at the artificial sites within 7 months, suggesting disturbance by the environmental factors. The number of species and diversity (H') varied significantly within sites at the beginning of the experiment, but no difference was observed after 7 months. Multivariate analysis (multidimensional scaling) revealed significant differences in community structure between the artificial and the natural areas from 7 months after the start of the experiment, except from 18 to 21 months. The community structures were mainly influenced by U. thomasi. Community structure at the artificial sites was affected by environmental variables, such as carbon, COD/IL sulfide, loss of ignition, kurtosis and silt, which changed over time. We observed no significant correlations between environmental variables and the dominant species, except in the case of Spio sp. and Macrophthalmus dilatatus, suggesting that the biological interactions and temporary disturbances such as typhoon, as well as the effects of artificial structures may also be important regulating factors in this system.

• 한국추진공학회지
• /
• 제25권6호
• /
• pp.74-86
• /
• 2021

복합재 격자구조체는 요구 하중을 최소한의 무게 및 두께로 지지하는 구조체로, 고강도 탄소섬유에 에폭시 수지를 함침시켜 필라멘트 와인딩 공법으로 제작된다. 구조적으로 반드시 필요한 부분만을 적층 및 제작하므로 항공기 동체, 위성발사체 및 유도무기 등에 적용하여 경량화를 극대화 할 수 있다. 본 논문에서는 대형 원통형 및 콘형 복합재 격자구조체의 설계, 해석, 제작 및 평가까지 전 순기에 해당하는 복합재 격자구조체 개발 및 평가를 수행하였다. 실제 발사체 및 유도무기에 적용이 가능하도록 직경 2,600 mm, 길이 2,000 mm의 원통형 격자구조체와 상단 직경 1,300 mm, 하단 직경 2,500 mm, 길이 900 mm의 콘형 격자구조체를 개발하였으며, 하중시험을 통해 대형 복합재 격자구조체의 성능을 평가하였다.

• 한국군사과학기술학회지
• /
• 제21권3호
• /
• pp.288-294
• /
• 2018

Recently, as the speed and performance of the launcher and the missile have been improved, it is necessary to consider the acoustic load of launching and flight in initial design step. In this paper, an experimental study on acoustic absorption and transmission characteristics of aluminium vs. sandwich composite structures were conducted. The overall noise reduction was evaluated by performing an acoustic test in the reverberation room, and the acoustic absorption and transmission loss of the structures were analyzed by conducting the sound absorption test inside the structure.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.341-345
• /
• 2002

The effect of the Pt electrode and the $Pt-IrO_2$ hybrid electrode on the performance of ferroelectric device was investigated. The modified Pt thin films with non-columnar structure significantly reduced the oxidation of TiN diffusion barrier layer, which rendered it possible to incorporate the simple stacked structure of Pt/TiN/poly-Si plug. When a $Pt-IrO_2$ hybrid electrode is applied, PZT thin film properties are influenced by the thickness and the partial coverage of the electrode layers. The optimized $Pt-IrO_2$ hybrid electrode significantly enhanced the fatigue properties with minimal leakage current.

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3156-3157
• /
• 2014

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.1929-1930
• /
• 2014

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.263-266
• /
• 2002

The Switched Reluctance Motor(SRM) drive system could operate in a very wide speed range with high efficiency There are no windings, no magnet and a brushless structure on the rotor, and there is only multi-phase centralized windings on the stator, those give rise to its simple and firm structure. It has good Prospects for application. such as industrial and home appliance. in aircraft. This paper is to show a development trends in SRM technology.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.82-82
• /
• 2012

Angle-resolved photoemission spectroscopy (ARPES) is a powerful tool to investigate the electronic structure of a single-crystalline solid. After the development of a two-dimensional electron detector, it became a basic experimental method in solid state physics comparable to other powerful tools such as x-ray and neutron scatterings. In this tutorial, I talk briefly on the basic principle of ARPES and its recent and future direction of development.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.153-153
• /
• 2010

Recently, to develop GaN-based light-emitting diodes (LEDs) with better performances, various approaches have been suggested by many research groups. In particular, using the patterned sapphire substrate technique has shown the improvement in both internal quantum efficiency and light extraction properties of GaN-based LEDs. In this paper, we discuss the influences of the direction of the hexagonal-structure arrays of lens-shaped patterns (HSAPs) formed on sapphire substrates on the crystal, optical, and electrical properties of InGaN/GaN multi-quantum-well (MQW) LEDs. The basic direction of the HSAPs is normal (HSAPN) with respect to the primary flat zone of a c-plane sapphire substrate. Another HSAP tilted by 30o (HSAP30) from the HSAPN structure was used to investigate the effects of the pattern direction. The full width at half maximums (FWHMs) of the double-crystal x-ray diffraction (DCXRD) spectrum for the (0002) and (1-102) planes of the HSAPN are 320.4 and 381.6 arcsecs., respectively, which are relatively narrower compared to those of the HSP30. The photoluminescence intensity for the HSAPN structure was ~1.2 times stronger than that for the HSAP30. From the electroluminescence (EL) measurements, the intensity for both structures are almost similar. In addition, the effects of the area of the individual lens pattern consisting of the hexagonal-structure arrays are discussed using the concept of the planar area fraction (PAF) defined as the following equation; PAF = [1-(patterns area/total unit areas)] For the relatively small PAF region up to 0.494, the influences of the HSAP direction on the LED characteristics were significant. However, the direction effects of the HSAP became small with increasing the PAF.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.81-90
• /
• 1993

The optimum design of a structure requires the determination of the economical member size and shape of the structure which satisfies the design condition and function. In this study, the process of design automatization of three-dimensional truss structure introduces the optimization technique tests its application in the design automatization, proposes its application method and applies the example structure of the parabolic antenna truss. Using the Formex Algebra of configuration function, the structure's mesh-generation is automatized. By using the program developed in this study, the input member array, member size and load condition designer can generate the input data file for the structure analysis and optimum design. This study is aimed at the development of a design automatization system that search for tile optimum value of a structure design by observing the structure's sensitivity from the modification of member array and member property.