• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.405-412
• /
• 2000

This paper is the study of methodology for development of interface structure modules for an integrated system or steel framework structures. For development of the modules, it is used that data translation for the Steel Detail Neutral File(SDNF) format and the methodology have contacted individual systems in integrated system. The point of methology is translated system interface data with ASCⅡ format of system output and is presented with EXPRESS-G schema model. In the future, these neutral format will use structural design, engineering, facilities management, fabrication, etc. Therefore such a series of neutral formants is valuable to development of all structure fields.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.132-143
• /
• 1999

In this study, an intermediate model is presented as a new method for development of a parametric simulation program. This model enables us to analyze effectively the static and dynamic structure of a real production system. The static structure of the real system can be modelled in an entity-relationship diagram and the dynamic structure of the real system in a Petri net. The intermediate model consists of an entity-relationship diagram and a Petri net. Using this intermediate model man can not only reduce the time and cost for simulation program development, but also increase the modelling reliability of the developed simulation program. To show the usefulness of this intermediate model. the intermediate models for two production subsystems, manufacturing sub-system and transport subsystem, are set up.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.757-766
• /
• 2017

For implementing the proportional navigation guidance law on passive homing missiles equipped with strapdown imaging infrared seekers, the line-of-sight angles and rates with respect to the inertial frame should be estimated by carefully handling the parasitic instability effect due to the seeker's latency. By introducing a new state vector representation along with the Pade approximation for compensating the time-delay of the seeker, this paper proposes a new guidance filter structure, stochastic dynamic models and measurement equations, in three-dimensional homing problem. Then, it derives the line-of-sight angle and rate estimator in general two-dimensional engagement by applying the extended Kalman filter to the proposed structure. The estimation performance and the characteristics of the proposed filter were evaluated via a series of numerical experiments.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.5
• /
• pp.311-325
• /
• 2001

Tissue engineering scaffolds play a critical role in regulating the reconstructed human tissue development. Various types of scaffolds have been developed in recent years, including fibrous matrix and foam-like scaffolds. The design of scaffold materials has been investigated extensively. However, the design of physical structure of the scaffold, especially fibrous matrices, has not received much attention. This paper compares the different characteristics of fibrous and foam-like scaffolds, and reviews regulatory roles of important scaffold properties, including surface geometry, scaffold configuration, pore structure, mechanical property and bioactivity. Tissue regeneration, cell organization, proliferation and differentiation under different microstructures were evaluated. The importance of proper scaffold selection and design is further discussed with the examples of bone tissue engineering and stem cell tissue engineering. This review addresses the importance of scaffold microstructure and provides insights in designing appropriate scaffold structure for different applications of tissue engineering.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.910
• /
• pp.1253-1264
• /
• 2004

The purpose of this study is to develop clothing shopping orientation[CSO] scale reflecting the conceptual structure of CSO. For this purpose, a questionnaire composed of comprehensive 85 CSO items was developed through 2-step preliminary tests. Data was collected from two samples. One sample(n=559) was for scale development and the other sample(n=235) was for cross validity test. Descriptive analysis, correlation analysis, exploratory factor analysis, regression analysis, ANOVA, and confirmatory factor analysis were used for data analysis. For each lower-dimension within the CSO conceptual structure model, 1-2 items were selected based on the quantitative and the qualitative standards. As a result, a CSO scale composed of 31 items was developed, and reliability, construct validity, cross validity, convergent validity, discriminant validity, and criterion validity of the scale were verified. This study has significance in offering the standardized scale to both the academic and the practical fields.

• Management & Information Systems Review
• /
• v.21
• /
• pp.239-269
• /
• 2007

The purpose of this thesis is to analyze empirically the relationship between market structure, measured by Herfindahl-Hershmann Index(HHI), and financial factors, and innovation in Korean industry panel datasets for 2000-2006. Results show that debt ratio and scale of the firm has a consistent positive effect on the investment in research and development. As more scale of the firm is getting bigger, the investment in R&D decrease. Also, as more debt ratio of firm rise, the investment for innovation increase. Concentration ratio, the HHI and the classification factor of High-tech industry and Low-tech industry has a consistent positive effect on the innovation. Factors affecting the investment in research and development include market structure and characteristics of industry as well as the internal affairs of the firm.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.602-603
• /
• 2006

Micro-porous nickel (Ni) with an open cell structure was fabricated by powder metallurgy. The pore size of the micro-porous Ni approximated $30{\mu}m$ and $150{\mu}m$. For comparison, porous Ni with a macro-porous structure were also prepared by both powder metallurgy (pore size $800{\mu}m$) and the traditional chemical vapour deposition method (pore size $1300{\mu}m$). The mechanical properties of the micro-and macro-porous Ni samples were evaluated using compressive tests. Results indicate that the micro-porous Ni samples exhibited significantly enhanced mechanical properties, compared to those of the macro-porous Ni samples.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.1
• /
• pp.37-64
• /
• 1992

A study on the changes of the oceanographical environment caused by Mokpo coastal zone development was carried out. Special emphasis was placed on the clarification of the water level changes and coastal current structure and influence of the environmental factors on the coastal area. In order to understand the structure oceangraphical environemnt, such as water temperature, salinity, suspended solids, pH, dissolved oxygen, chemical oxygen demand, biochemical oxygen demand, distribution of bottom sediment, tide and current were measured. To investigated the structure of tide and current for the future development, a numerical analysis was carried out. In certain zones, it was found to be flooding problems near the lowlying commercial area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.80-87
• /
• 2017

In the past, the United States has been engaged in large-scale urban development projects as a tool for urban regeneration to revitalize distressed urban areas. On the other hand, large-scale urban development projects have been stalled or discontinued globally since the 2008 economic crisis. Despite this, the Hudson Yard development, which is the subject of this study, has resumed smoothly due to the characteristics of its development structure and rational negotiation process. Most domestic developments depend on the economic circumstances, and the problems that are exposed in a privately led development are repeated; the Yongsan International Business District Development is a representative failure case. This study examined the characteristics of the business structure and the nature of the negotiation process in the Hudson Yard development project in New York City.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.4
• /
• pp.67-75
• /
• 2022

The purpose of this paper is to provide basic data to Si and Gun preparing for rural agreements in the future through consideration and case analysis for rural conventions, such things as living standards, hierarchical analysis methods, and general rural development projects. In the 1970s, sporadic and one-off projects focused on individual projects were repeatedly carried out in rural areas, which were undergoing dramatic changes in population movement, land use, landscape, economic growth and living. The keyword of the government's policy has changed to a way that existing rural development projects are planned and promoted by local governments themselves in conjunction with the issue of autonomy and decentralization. In addition, with the introduction of Rural Convention, the central and local governments are striving to achieve common policy goals. However, due to the lack of understanding of the Rural Convention introduced as a pilot project in 2020, the lack of living areas setting-standards, unclear classification of hierarchical structure, and excessive goal consciousness for general agricultural and fishing village development projects remain, fading the original purpose of the Rural Convention. Therefore, this study analyzed the seven reports of the Gyeongsang region selected in the 2021 Rural Convention to identify the characteristics of living area, hierarchical structure analysis, and detailed projects (rural center revitalization project, basic living base development project) and provided them as basic data. As a result of the study, first, according to the results of the hierarchical structure analysis, the first class was derived from 6 out of 7 Si and Gun. This is judged to be the result of the current rural population, social, and economic problems. Second, according to the results of the division of living areas, it was confirmed that except for one local government in seven cities and counties, the remaining six local governments were divided into three single living areas and three two living areas. This is the result obtained through a comprehensive review by overlapping the results of various analyses such as hierarchical analysis and resident surveys and OD data, and shows a different form from the existing upper or related plans. It is judged that this is the result of including qualitative contents such as residents' opinions along with various analyses when determining the living area. Third, the proportion of the budget for rural center revitalization and basic living base development projects to the total project cost subject to the Rural Convention was 59.6%, which was relatively higher than that of other general agricultural and fishing village development projects. It is judged that it is preferred because the unit project cost is relatively high in Si and Gun, and that quantitative results can be visually shown after the project is terminated.