• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.413-418
• /
• 2018

This fundamental study is to examine the significance and limitation of the fumed silica addition to enhance the early compressive strength gain and thermal conduction resistance of cement pastes. The fumed silica content varied from 0% to 1.6% of the cement content by wt% at an interval of 0.4%. Test results showed that the addition of fumed silica is favorable to enhancing the early strength gain of the cement pastes, indicating that 1-day compressive strength corresponded to 45% of the 28-day strength. This high-early strength gain rate is comparable to the trend commonly observed in steam-cured cement concrete. However, the addition of fumed silica little influenced the thermal conduction resistance of cement pastes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.694-699
• /
• 2002

As the demand for slim laptops requires ion'-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method far anti-vibration mechanism with respect to the existing servo gain plot. This method verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• Journal of Information Display
• /
• v.9 no.1
• /
• pp.26-32
• /
• 2008

The dependence of optical performances of collimating films such as prism films and pyramid films on the reflecting properties of reflection films were investigated by using a ray tracing technique. The angular distribution of the luminance and the on-axis luminance gain were obtained by using a simple backlight model composed of a reflection film, a virtual flat light source, and a collimating film. Three kinds of reflecting properties were used, which were a perfect Lambertian reflector, a perfect mirror reflector, and a reflector having both diffuse and specular properties. It was found that the on-axis luminance gain was the highest in the simulation where a mirror reflector was used, while the viewing angle was the widest where the Lambertian reflector was used. This result indicates that it is necessary to optimize the simulation condition such as the reflecting properties in order to predict the optical performances of collimating films accurately. Quantitative correlation between the optical characteristics of collimating films and the reflecting properties of reflection films can be used to improve simulation technique for the development and the optimization of collimating films for LCD backlight applications.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.11
• /
• pp.833-839
• /
• 2002

As the demand for slim laptops requires low-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method for anti-vibration mechanism with respect to the existing servo gain plot. Thismethod verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.998-1003
• /
• 2013

This study proposes an adaptive control algorithm for lateral motion of a UGV (Unmanned Ground Vehicle) using an NN (Neural Networks). The lateral motion of the UGV can be corrupted with various uncertainties such as side slip. In order to compensate the performance degradation of the UGV under various uncertainties, an NN-based adaptive control is designed by utilizing a virtual control concept. Since both the drift and input gain terms are uncertain, the proposed method adapts the whole terms related to the difference between the nominal and real systems. To avoid a singularity problem with the adaptive control, the affine property of the UGV dynamic model is utilized and the overall closed-loop stability is analyzed rigorously. Finally, numerical simulations using Carsim are performed to validate the effectiveness of the proposed scheme.

• Journal of Engineering Education Research
• /
• v.17 no.3
• /
• pp.42-50
• /
• 2014

Since internships or field training provide students with opportunities to choose skills, business interests and aptitudes in the actual workplace, their significant role in higher education has been gradually emphasized. In particular, engineering students gain increased adaptability to the industry, enhance their research abilities and acquire field-based expertise through internships or field training. However, effective operation of such internships or field training often pose various limitations. In this regard, the development of a system to manage students properly is urgently required for the effective operation of internships or field training. Systematic management of a series of related information ranging from a survey on the demand for internships or field training, planning, development and operation of pre-training programs, student guidance through information sharing between universities and businesses, data-gathering with regard to students' difficulties and their requirements, to prospects for future employment. In line with these requirements, this study attempts to present a modeling scheme for the development of a student management system for use in internships or field training. Towards this end, a questionnaire survey is conducted with engineering professors, students and graduates, along with a review of related literature to identify the needs for system development. Based on the results, a model of the system will be proposed through expert consultation.

• World Technopolis Review
• /
• v.3 no.1
• /
• pp.17-29
• /
• 2014

The importance of science and technology as the root of exceptional regional economic development has been extolled since the time of Schumpeter. Today emerging technologies are signaling the start of a new economic cycle where regions that are effective in technology translation will gain advantage. The will of policymakers to translate technology into regional job and wealth creation seems to be at an all-time high. Yet an improved process for translating technical development into regional prosperity has proved elusive. If there are no processes other than applying techniques that have worked in the past for other regions to a new region then there is cause for concern. Here the authors seek to add to this field of knowledge by applying elements of the varied cluster theories to provide a basis for policy for regional economic development by turning science and technology into commercial innovation. We provide a review of current cluster theories and discuss the positive and negative issues associated with each. We propose a model that allows interested professionals to utilize aspects of each cluster perspective geared to the realities of their specific area.

• Korean Journal of Pharmacognosy
• /
• v.42 no.3
• /
• pp.265-270
• /
• 2011

Acute toxicity of a combined preparation of the standardized extracts Scutellaria baicalensis GEORGI and Salvia miltiorrhiza BUNGE in a ratio of 3:1 was examined in male and female ICR mice. Mice were treated with the test substance intragastrically at a dose of 0 mg/kg, 5 mg/kg, 50 mg/kg, 500 mg/kg or 2,000 mg/kg and observed for two weeks. No death or abnormal clinical sign was shown during the observation period. Also there were no difference in net body weight gain, organ weight, and gross pathological findings at the terminal sacrifice. The results suggested that acute oral toxicity of a combined preparation of the standardized extracts is very low at the conditions employed in this study.

• The Journal of Asian Finance, Economics and Business
• /
• v.2 no.4
• /
• pp.21-29
• /
• 2015

Green technologies are essential tools to ensure sustainable development of the economy. In this regard, the article deals with analysis of the development tendency of green economy in Kazakhstan emphasizing commercialization of green technologies. In the first part of the study, authors investigated more than 50 official sources of information, including laws, concepts, programs, events and reviews of major international organizations. The study's methodological basis included Kazakhstan's legislative and regulatory Acts, state programs and Concept for transition to Green economy, and data about innovations in the field of green technologies. Six experts were interviewed in order to determine factors which interfere to commercialization of green technologies. Urgent problems and trends of development, challenges and obstacles to gain green economy have also been identified in the result of expert interviewing. The research shows that despite Kazakhstan's intentions to update and develop much of its infrastructure over the coming 20 years, inefficient use of resources is currently observed in every sector. It is necessary to encourage scientists and entrepreneurs to invent and commercialize new green technologies. That would be basis for successful implementation of transition from "brown" to green economy.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.90-95
• /
• 2019

This study aims to gain the design data through the process design of the organic Rankine cycle, which can produce 250kW of electric power through waste heat recovery. In this study, a simulation was conducted using APSEN HYSYS to make the model for the process design of the 250kW-class waste heat recovery system. For the thermodynamic model, the test was conducted with hot water as the heat source, the water steam as the cooling water for the cooler, and the refrigerant R245FA in the cycle. In the final design, it was expected and found from the simulation that the cycle efficiency was 12.62% and that 250kW of power was produced considering the margin of 80%.