• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.3 no.3
• /
• pp.13-22
• /
• 1980

Research and Development has a property that involves uncertainity and risk in itself. Therefore, in order to scheduling of R & D activity, it Is needed of a certain probabilistic network technique with due regard to feedback process used to occur in the R & D proceeding. It is GERT that was developed as the need arises . In this study, the network structure of GERT-I and GERT-II was combined and then simulation analysis was used to it. According to that analysis , an advanced GERT model which covers the following stochastic problems was examined. 1 Evaluating success feasibility under the complex condition (time and cost). 2 Selecting acceptance range for the worst. 3. Selecting optimum path on basis of time, cost and success. 4. Evaluating project utility among the project alternatives. It is for managing R&D projects more effectively.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.9 no.4
• /
• pp.301-308
• /
• 2009

In the modern life, machines are used for various areas in industries as the advance of science and industrial development has proceeded. In many machines, the rotating machines play an important role in many processes. Therefore, the development of fault diagnosis and monitoring system for rotating machines is required. An ubiquitous sensor network (USN) is a combination of the key computer science and engineering area technology including the wireless network, embedded system hardware and software, communication, real-time system, etc. It collects environmental information to realize a variety of functions. In this work, a data reduction algorithm for USN based remote fault diagnostic system which can be easily applied to previously built factories is proposed. To verify the feasibility of the proposed scheme, some simulations and experiments are executed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1954-1961
• /
• 2009

This paper describes the development of a three-phase line-interactive dynamic voltage restorer with hybrid detection method, which is composed of three H-bridge inverter modules and super-capacitors. The operational feasibility was verified through computer simulations with PSCAD/EMTDC software, and experimental works with a 3kVA prototype. The developed system can compensate the input voltage sag and interruption within 2ms. The maximum allowable duration of voltage interruption is about 4 seconds. The developed system can be effectively used to compensate the voltage interruption in the sensitive load, such as computer, communication devices, and automation devices, and medical equipment. The developed system has a simple structure to be easily implemented with commercially available components, and to be highly reliable in operation.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.779-781
• /
• 2004

Recently, as the interests in the electrical propulsion ship increase, it is needed to prepare for the technical demand of the versatile HTS synchronous motor, the noble paradigm of the electrical motor. In this paper, the electrical propulsion apparatus was classified at first. The, the merits and demerits of the HTS synchronous motor were investigated. Finally, the feasibility study of development of the HTS motor was performed with electromagnetic FEM analysis. Additionally, the points to be considered in decision of the capacity or number of the HTS motor and the way to supply electricity were studied in this paper. This work would be very useful in establishing the development direction of the HTS motor

• Journal of Microbiology and Biotechnology
• /
• v.18 no.7
• /
• pp.1342-1351
• /
• 2008

The feasibility of the use of Flp-mediated cassette exchange in the development of a CHO cell line, which produces erythropoietin (EPO) stably and largely, was investigated. A stable, high enhanced green fluorescence protein (EGFP)-producing clone was screened by extensive flow cytometric analysis. An EPO expression unit was targeted into the premarked locus of the stable parental clone by Flp-mediated cassette exchange and a correctly targeted clone (FC28T7) was obtained. The EPO production of FC28T7 was proven to be stable in long-term culture. Furthermore, the Flp-mediated cassette exchange did not alter the stable parental clone's characteristics concerning transgene expression level and stability. Taken together, the data obtained here indicated that the establishment of CHO cell lines stably producing a desired protein is achievable using Flp-mediated cassette exchange.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.160-161
• /
• 2007

This paper describes the development of a single-phase DVR(Dynamic voltage Restorer), which is composed of H-bridge inverter and super-capacitors. The operational feasibility was verified through computer simulations with PSCAD/EMTDC software, and experimental works with 3kVA prototype. The developed system can compensates the input voltage sag and interruption within 2ms, in which the maximum allowable duration of voltage interruption is 1.5 seconds. It can be effectively used to compensate the voltage interruption in the sensitive load, such as computer, communication equipment, automation equipment, and medical equipment. The developed system has a simple structure to be easily implemented with commercially available components and to be highly reliable in operation.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.45-47
• /
• 2008

This paper describes development of PMSG wind power system model using wind turbine simulator and matrix converter. The wind turbine simulator, which consists of an induction motor with vector drive, calculates the output torque of a specific wind turbine using simulation software and sends the torque signal to the vector drive after scaling down the calculated value. The operational feasibility of interconnected PMSG system with matrix converter was verified by computer simulations with PSCAD/EMTDC software. The simulation results confirm that matrix converter can be effectively applied for the PMSG system.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.208-210
• /
• 2005

A lot of conventional automotive components driven by mechanical power source are being replated with electrical ones to comply with the demands of market and customer, therefore the amount of electric energy used in a vehicle will be increased continuously. The increment of electric power demand causes interest on new higher power system such as 42V Power Net, and furthermore necessity for development of energy storage device is highlighted recently. This paper presents the design of the BLDC motor drive for Cooling Fan in 42V automotive system. Test results confirmed the feasibility of the proposed motor drive system design.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.301-305
• /
• 2005

This paper introduces a novel technique to detect and isolate the failures of multiple actuators connected to a system. Failure of actuator considered in this study could be any type of erroneous input that is different from commanded one. The interaction matrix technique allows the development of input-output equations that are only influenced by one target input. These input-output equations serve as an effective toot to monitor the integrity of each actuator regardless of the status of the other actuators. The method is capable of real-time actuator failure detection and isolation under any type of input excitation. The laboratory experiment using 8-bay NASA truss structure verifies the feasibility of the proposed method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.322-326
• /
• 2000

This paper is concerned with the development of remote vibration measurement system using the internet. Recently, various techniques are developed based on the advance of the internet environment. In this study, we developed the remote vibration measurement system using the internet server programming technique, the client programming technique, the GPIB programming, and the A/D, D/A programming techniques. Hence, we can control the measurement devices remotely. The feasibility of the system is validated using the experimental setup. The output of the D/A is connected to the small exciter and the piezoceramic sensor is connected to the A/D port. By sending out the exciting signal to the structure, we can collect the response. The experiment shows that the proposed idea works well. Another experiment consists of the function generator and the low-pass filter circuit. The wave form, amplitude, and the frequency of the function generator is controlled by the GPIB program and the output of the circuit is collected by the A/D port. The output is then displayed in HTML format.