• Journal of Sensor Science and Technology
• /
• v.25 no.5
• /
• pp.333-336
• /
• 2016

In this study, a beta monitoring sensor was developed as a part of basic research for quantitative beta monitoring underwater, and its performance was evaluated using a calibration source. A beta detection sensor was manufactured by using SiPM(silicon photomultiplier) and $CaF_2$:Eu, YAG:Ce, YAP:Ce scintillator. A large-area light guide was introduced to improve beta-ray detection efficiency. As calibration sources, the Beta source $^{90}Sr$, which is the main fission product of a nuclear accident, and the gamma source $^{137}Cs$ are used. In the performance evaluation, it is confirmed that scintillator $CaF_2:Eu$ gives the highest beta-ray detection response. Compared to gamma ray, beta-ray detection responsivity and detection efficiency are verified. Therefore, this study is expected to contribute to basic research in the development of an underwater beta-ray monitoring system.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.2
• /
• pp.102-111
• /
• 1997

For rational agricultural land use planning, it is quite necessary to get hold of land suitability precisely and to make decision on land use patterns accordingly. In the methodological viewpoint, objective and scientific evaluation techniques for land suitability classification should be supported for the systematic land use planning. As one of technical development approaches to rational land use planning, this study tried to frame a land suitability evaluation system for agricultural purposes. Evaluation unit is defined as a tract of land bounded by road, other land units and topographical features. And quantification theory was applied in the determination works of evaluation criteria. The administrative area of Namsa-myon(district), Yongin-si(city), Kyunggi-do(province) was selected for the case study. In order to check the feasibility of the evaluation system developed in the study, field check team, consisting of 2 government officers and 2 representative farmers, carried out evaluation works by observation on 148 sample land units, 10% of total 1,480 ones. Between estimated and observed results, there showed very good relationship of its multiple correlation coefficient, R=0.9467.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.352-361
• /
• 2005

In this study, conventional head-end processes of spent TRISO fuel have been reviewed to develope more effective treatment methods. The main concerns in the TRISO treatment are to effectively separate the carbon and SiC contained in the TRISO particles. The crush-burn scheme which was considered in the early stages of the development has been replaced by the crush-leach process because of $^{14}C$ problems as a second waste during the process. However there are still many obstacles to overcome in the reported processes. Hence, innovative thermomechanical concepts to breach the coating layers of the TRISO particle with a minimized amount of second waste are proposed in this paper and their principles are described in detail.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.79-86
• /
• 1997

The need for an active exhaust moise controller has been growing as an reinforcement of exhaust noise regulation, high power output and improvement of average fuel economy. In this study, for development of this active exhaust noise controller, the implementation of a composition of realtime control algorithm for active exhaust noise control and the construction of simulator for realtime control algorithm for active exhaust noise control has been investigated. Also, in order to implement active exhaust noise control with this simulator, the feasibility model for control of vehicle exhaust noise control is suggested.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.667-678
• /
• 2012

Internet and information technology due to the development of rapid changes in the investment environment, the existing securities, or by disassembling the combined financial engineering to create new securities with the development of enlarged minimize losses to investors in financial markets more stable that can be and need a way to invest in this paper, such as individual stocks or a specific index of those derivatives that are linked to the December 1, 2005 and 2010 the market began trading from the phone call attention off new measures to gauge the individual through ELW underlying assets such as stocks or a specific index to minimize the loss of a stable hedge for investors to evaluate the possibility of studying for.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.433-448
• /
• 2011

In this paper, low birth rate due to aging in adramatic increase in the older population diversified modern social welfare services to meet the demand of the Ubiquitous Network approach to the introduction of social welfare through feasibility studies, modern social welfare facilities for the operation of the future direction and development of alternative to evaluate the present.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.126-133
• /
• 2008

Geotechnical limit state design methods; LRFD of North America is an approach that estimates resistance using design model and then multiplies resistance factor by calculated resistance to reflect the uncertainty of geomaterials and design models; whereas, Eurocode of the Europe employs the partial resistance factor applied directly to each variable in the resistance equation that individual soil properties such as cohesion and angle of internal friction are applied. This discussion paper is a study on characteristic value which has globally been argued through processing of development of Eurocode 7 for geotechnical design even to the present. Estimating the characteristic value of soil properties affects not only determination of design value applied directly to design of geotechnical structures, but also economic feasibility and stability of the structures.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1947-1954
• /
• 2007

This paper describes the development of a high-performance single-phase line-interactive Dynamic voltage Restorer, which is composed of an H-bridge inverter and super-capacitors. The operational feasibility was verified through computer simulations with PSCAD/EMTDC software, and experimental works with 3kVA prototype. The developed system can compensates the input voltage sag and interruption within 2ms, in which the maximum allowable duration of voltage interruption is 1.5 seconds. It can be effectively used to compensate the voltage interruption in the sensitive load, such as computer, communication equipment, automation equipment, and medical equipment. The developed system has a simple structure to be easily implemented with commercially available components and to be highly reliable in operation.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.6 no.1
• /
• pp.17-22
• /
• 2010

A sliding accident on the road have a high percentage by road freezing, especially, it is often appeared at bridges and tunnel of freezing areas. Thus, the stability of road operations is enhanced by preventing a partial freezing phenomenon. According to the geothermal snow melting system analysis, a pattern of thermal conductivity is found out about pavement materials of concrete and asphalt when it is buried. For the feasibility study on geothermal snow melting system, analysis of the ground melting point when operating system, life evaluation of pavements and safety evaluation of pipes are performed.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.87-95
• /
• 2007

Logistics creates a boom in accordance with the recent new technique's development along with the recent RFID/USN of ubiquitous computing technique. The wave of 4PL(Fourth Party Logistics) that added the strategic consulting based on new IT techniques to logistics outsourcing through existing 3PL service with is a great issue. Moreover, the customer enterprises which contained manufacturers and distributors need the one stop service, therefore a method for effectively dealing with global logistics' environment changes is needed. Above all, a development of the 4PL system with RFID is very urgent. We developed the RFID u-4PL system progressed more than the present system, in which we applied many international standards. Finally, we constructed the web service based on Web 2.0 because of important condition of 4PL.