• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.282-288
• /
• 2002

A new on-line bar joining technology employing the concept of a solid-state joining has been developed for the endless rolling by POSCO, RIST and MHMM Inc.. In the process, the bars are partially descaled, partially overlapped, joined by shearing action and crops are finally removed. The feasibility of the developed process was evaluated in this study in terms of microstructures and mechanical properties of joints, and the response of the joint to rolling.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.139-152
• /
• 2019

The design of new navigation signals is a key factor in building new satellite navigation systems and/or modernizing existing legacy systems. Navigation signal design involves selecting candidate groups and evaluating and analyzing their signal performances. This process can be easily performed through software simulation especially at the beginning of the development phase. The analytical signal performance analysis software introduced in this study is implemented based on equations between the signal design parameters of Radio Navigation Satellite Service (RNSS) and the navigation signal figures-of-merit (FoMs). Therefore, this study briefly summarizes the RNSS signal design parameters and FoMs before introducing the developed software. After that, we explain the operating sequence of the implemented software including the Graphical User Interface (GUI), and calculate the FoMs of an example scenario to verify the feasibility of the software operations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1840-1845
• /
• 2005

The SoC and digital technology development recently enabled the emergence of information devices and control devices because the SoC present many advantages such as lower power consumption, greater reliability, and lower cost. It is required to use an embedded operating system for building control systems. So far, the Real-Time operating system is widely used to implement a Real-Time system since it meets developer's requirements. However, Real-Time operating systems reveal a lack of standards, expensive development, and license costs. Embedded Linux is able to overcome these disadvantages. In this paper, the implementation of control system platform using Real-Time Embedded Linux is described. As a control system platform, we use XScale of a Soc and build Real-Time control platform using RTAI and Real-Time device driver. Finally, we address the feasibility study of the Real-Time Embedded Linux as a Real-Time operating system for mobile robots.

• Journal of ILASS-Korea
• /
• v.15 no.2
• /
• pp.53-60
• /
• 2010

This study presents development of digital particle holographic system and its application to spray field to measure three-dimensional velocities and sizes of spray droplets. A double exposure hologram recording system with synchronization system for time control was established and digital holograms can be recorded in a short time interval. To process recorded holograms, the correlation coefficient method was used for focal plane determination of particles. To remove noises and improve the quality of holograms and reconstructed images, the Wiener filter was adopted. The two-threshold and image segmentation methods were used in binary image transformation. For particle pairing, the match probability method was adopted. The developed system was applied to spray field and three-dimensional velocities and sizes of spray droplets were measured. The measurement results of digital holographic system were compared with those made by laser instruments, PDPA(Phase Doppler Particle Analyzer), which proved the feasibility of in-line digital particle holographic system as a good measurement tool for spray droplets.

• Korean Journal of Agricultural Science
• /
• v.37 no.1
• /
• pp.105-112
• /
• 2010

The objective of this study is to develop a standardized model for analyzing water balances in large scaled water basin by considering agricultural water districts, and to evaluate the hydrological feasibility of applying this model to several water districts such as Nonbul, Geumbok, Daejeon 1, Daejeon 2, and Cheonggang in Geum river basin. Ten types of stream network were considered in developed model. Using this model, streamflows were simulated by major stations and water balances were analyzed by water districts. Simulated streamflows and measured streamflows were compared at check stations such as Gapcheon and Bugang stations in which Nash and Schcliffe's model efficiencies were 0.633, 0.902, respectively. This results showed its applicabilities to national water resources plan, rural water development plan, and total maximum daily load plan in Korea.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.81-83
• /
• 2011

A modular house is a house that is assembled on-site from modularized units. As such units are manufactured in a factory, the construction period is reduced, resources are recycled, and quality is improved. However, the construction technique applied to conventional modular houses has not overcome certain structural restrictions, as it is currently used to build houses less than 4 stories in height, which means that it lacks economic feasibility. For this reason, this research aims to develop a scenario of a construction method for Korean modular housing that can be applied to urban-type housing higher than 12 stories. This research is expected to provide fundamental data necessary for the future development of a construction method for Korean modular housing.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.305-308
• /
• 2006

For controlling micro-flows inside a LOC (lab-on-a-chip) a syringe pump or an electronic device for EOF(electro-osmotic flow) have been used in general. However, these devices are so large and heavy that they are burdensome in the development of a portable micro-TAS (total analysis system). In this study, a new flow control system employing pressure chambers, digital switches and speed controllers was developed. This system could effectively control the micro-scale flows inside a LOC without any mechanical actuators or electronic devices We also checked the feasibility of this new control system by applying it to a LOC of micro-mixer type. Performance tests show that the developed control system has very good performance. Because the flow rate in LOC is controlled easily by throttling the speed controller, the flows in complicate microchannels network can be also controlled precisely.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.327-333
• /
• 2008

The cavitating flow simulation is of practical importance for many engineering systems, such as marine propellers, pump impellers, nozzles, injectors, torpedoes, etc. The present work has developed a base code for simulating cavitating flows past cylinders and hydrofoils. The governing equation is the Navier-Stokes equation based on homogeneous mixture model. The momentum and energy equation is in the mixture phase while the continuity equation is solved in liquid and vapor phase, separately. The solver employs an implicit preconditioning algorithm in curvilinear coordinates. The computations have been carried out for the cylinders with spherical, 1- and 0-caliber forebody and hydrofoil of ALE and NACA cross-section and, then, compared with experiments and other numerical results. Fairly good agreements with experiments and numerical results have been achieved. The present base code has shown the feasibility to solve the cavitating flow past supercavitating torpedo after the improvement for compressibility effects and interactions with hot exhaust gas of propulsive rocket.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.327-333
• /
• 2008

The cavitating flow simulation is of practical importance for many engineering systems, such as marine propellers, pump impellers, nozzles, injectors, torpedoes, etc. The present work has developed a base code for simulating cavitating flows past cylinders and hydrofoils. The governing equation is the Navier-Stokes equation based on homogeneous mixture model. The momentum and energy equation is in the mixture phase while the continuity equation is solved in liquid and vapor phase, separately. The solver employs an implicit preconditioning algorithm in curvilinear coordinates. The computations have been carried out for the cylinders with spherical, 1- and 0-caliber forebody and hydrofoil of ALE and NACA cross-section and, then, compared with experiments and other numerical results. Fairly good agreements with experiments and numerical results have been achieved. The present base code has shown the feasibility to solve the cavitating flow past supercavitating torpedo after the improvement for compressibility effects and interactions with hot exhaust gas of propulsive rocket.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.108-113
• /
• 1994

Active noise control technique has superior performance in low frequency ranges(50 .approx. 400Hz) to the conventional passive noise control technique. For the feasibility of active noise control, it is required to develop a controller which can implement control algorithm on real-time. In this study, therefore, real-time controller is developed using TMS320c25, high speed digital processor. Unlike conventional DSP board of complete ADD ON type, it is possible for the developed controller to interface with the other computer system easily by series communication for the convenience of program development. Furthermore it is designes to be separated readily as a control device. Active noise control of duct system is implemented ti evaluate a performance of developed device. Active noise control of duct system is implemented to evaluate a performance of developed controller using filtered-x LMS algorithm.