• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.89-99
• /
• 1990

It is required to develop a hull form with low resistance and high propulsive efficiency for the improvement of the ship-board operational economy. Since the hull forms with low resistance frequently have lower propulsive efficiency and on the other hand the hull forms with higher propulsive efficiency don't show good resistance characteristics, it is always very difficult to obtain economical hull forms which require less propulsive power accordingly. Efforts have been made to pursue a stern form with excellent resistance and propulsion characteristics together by shaping the run of the so-called buttock-flow type stern, which is known to have good viscous resistance performance, like that of conventional aftbody(U-type or Hogner type) featured by high propulsive efficiency. First model tests confirmed that the above concept can be one of the alternative approaches to the design of the good stern form and by the continuing efforts thereafter for the refining of the concept, propelled by the first promising results, stern form of good resistance performance together with good propulsive efficiency has been realized to some extent. In addition, it is confirmed that the new new stern can have better cavitation and vibration characteristics due to uniform wake-fields and the compact engine room arrangement can be possible due to it's larger floor area in way of engine room double bottom as compared with usual barge stern.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.480-488
• /
• 2016

For the development of areas around railway lines, subsurface construction using the non-open cut method under the railway has recently been increased. However, when a structure under a railway is constructed, the stress release of the ground is not considered an important factor in the design. In this study, laboratory tests were conducted to determine a zone of stress relaxation. Field tests using an inclinometer were performed to measure the horizontal displacement of the ground during non-open cut construction. The stress release zone and the subgrade stiffness were investigated by numerical analysis. The results of the laboratory tests indicated that the failure zone in the ground was similar to a Rankine's active earth pressure zone. The measured data from the inclinometer in the field tests showed that displacements started when a steel pipe was pushed into the ground. The results of numerical analysis show that lateral earth pressure was also close to Rankine's active earth pressure. The roadbed support stiffness of the soil around the structure decreased to 40% of the original value. The ground around the subsurface structure constructed using nonopen cut methods should be reinforced to maintain the running stability of train.

• Korea journal of population studies
• /
• v.9 no.2
• /
• pp.67-78
• /
• 1986

With Economic Development Plan, the Korean National Family Plan Program was introduced in early 1960's. The program, which has been a way for constraining population increase, has obtained excellent results. In other word, it has had an important role in controlling the increase in population. The purpose of this study is to analyze the change of fertility rates since 1970 and the lever of completed fertility of Korean women since 1960. There are Age-specific Fertility Rate(ASFR), Total Fertility Rate(TFR), Gross Reproduction Rate(GRR) and Net Reproduction Rate(NRR) etc. in indices of period fertility. It is also possible to be seen the completed fertility rates by using Parity Progression Ratio. The data necessary for this study were obtained from Population & Housing Census Report from the year of 1960 to 1980 and Vital Statistics from 1980 to 1984, which conducted by Economic Planning Board, Republic of Korea. The summarized results of this study were as follows : 1. Age-specific Fertility Fertility Rate(ASFR) has been continuously decreasing till now. The ASFR for the women aged 25 to 29 was higher than those of any other groups and the ASFR for the women aged 20 to 24 was higher than that of the women aged 30 to 34 since the mid 1970's. 2. There are Total Fertility Rate(TFR), Gross Reproduction Rate(GRR) and Ney Reproduction Rate(NRR) etc. in reproduction rates. First of all, TFR and GRR have been declining except late of 1970's and TFR showed 2.23 per ever-married women, GRR was 1.05 in 1982. Next, the change of NRR could not be found without life table by year and only NRR for the time of census was to be found. In 1980, NRR showed 1.27 per ever-married women and the level was still out of reach at replacement level of population. 3. Specific Fertility Rate by Birth Order(SFRBO) showed to be declined continually since 1972. Especially the SFRBO of the third live birth was decreased from about 22 per 1,000 ever-married women in 1972 to 12 or so in 1982. 4. To know the level of completed fertility, the mean number of completed live births per ever-married women was calculated from 1960 to 1980. The number of completed live births was more than 5 per ever-married women by the year of 1975 but have been declining and resulted in 4.69 in 1980.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.743-746
• /
• 2019

In this paper we proposed a new ocean radiation automatic monitoring system. The proposed system has the following characteristics: First, using NaI + PVT mixed detectors, the response speed is fast and precision analysis is possible. Second, the application of temperature compensation algorithm to scintillator-type sensors does not require additional cooling devices and enables stable operation in the changing ocean environment. Third, since cooling system is not needed, electricity consumption is low, and electricity can be supplied reliably by utilizing solar energy, which can be installed at the observation deck of ocean environment. Fourth, using GPS and wireless communications, accurate location information and real-time data transmission function for measurement areas enables immediate warning response in the event of nuclear accidents such as those involving neighboring countries. The results tested by the authorized testing agency to assess the performance of the proposed system were measured in the range of $5{\mu}Sv/h$ to 15mSv/h, which is the highest level in the world, and the accuracy was determined to be ${\pm}8.1%$, making normal operation below the international standard ${\pm}15%$. The internal environmental grade (waterproof) was achieved, and the rate of variation was measured within 5% at operating temperature of $-20^{\circ}C$ to $50^{\circ}C$ and stability was verified. Since the measured value change rate was measured within 10% after the vibration test, it was confirmed that there will be no change in the measured value due to vibration in the ocean environment caused by waves.

• Journal of the HCI Society of Korea
• /
• v.14 no.2
• /
• pp.41-47
• /
• 2019

In this study, a smart assistive device is designed to recognize pedestrian signal and to provide audio instructions for visually impaired people in crossing streets safely. Walking alone is one of the biggest challenges to the visually impaired and it deteriorates their life quality. The proposed device has a camera attached on a pair of glasses which can detect traffic lights, recognize pedestrian signals in real-time using a machine learning algorithm on GPU board and provide audio instructions to the user. For the portability, the dimension of the device is designed to be compact and light but with sufficient battery life. The embedded processor of device is wired to the small camera which is attached on a pair of glasses. Also, on inner part of the leg of the glasses, a bone-conduction speaker is installed which can give audio instructions without blocking external sounds for safety reason. The performance of the proposed device was validated with experiments and it showed 87.0% recall and 100% precision for detecting pedestrian green light, and 94.4% recall and 97.1% precision for detecting pedestrian red light.

• Journal of Korean Critical Care Nursing
• /
• v.12 no.3
• /
• pp.35-49
• /
• 2019

Purpose : This study aimed to propose a common scope of practice (SOP) for 13 specialties of Advanced Practice Nurses (APNs) in Korea. Methods : The first draft of a common SOP was extracted from domestic and international laws with a literature review by 17 experts from the Korean Association of Advanced Practice Nurses (KAAPN). Then, the common SOP was finalized after comparing the activities of APNs in clinical settings. Results : A total of 70 duties were identified and six categories were suggested for the common SOP. The SOP proposed by the KAAPN featured the following: 1) identification of and discrimination between health problems; 2) prescription and implementation of diagnostic tests; 3) treatment of injuries and diseases while implementing measures to prevent exacerbation; 4) prescription of medicinal products in line with 1) to 3); 5) referral and consultation; and 6) education and counseling. It was then confirmed that the proposed six categories in the common SOP reflected all the duties performed by APNs in clinical practice, including all 40 activities. Conclusion : The results of this study can be used as evidence for the legalization of a common SOP for APNs. Given the increasing multidisciplinary team approach adopted in Korean hospitals, it may be desirable to establish a broader SOP to reflect the diverse duties of APNs.

• The Korean Journal of Franchise Management
• /
• v.10 no.3
• /
• pp.25-35
• /
• 2019

Purpose - The major objective of this study was to investigate the effect of franchisor's (economic and philanthropic) CSR in inspiring franchisee's loyalty for the franchisor. Another aim of this investigation also was to clarify the mediating role of economic and social satisfaction in the relationship between franchisor's CSR and franchisee's loyalty. Research design, data, and methodology - This study explores the structural relationship between franchisor's CSR and franchisee's loyalty and in these relationships, the mediating role of relationship satisfaction. Data were gathered from employees(above manager) in food-service franchisee companies in Seoul, Korea. The questionnaires were distributed to managers of the franchise stores. A total of 251 questionnaires were collected. Data management and analysis were performed using SPSS 21.O and SmartPLS 3.0. Evaluation of measurement model and structural model was carried out using confirmatory factor analysis and correlation analysis. Result - The results of this study show as follows. First, economic CSR had positive effects on economic satisfaction and social satisfaction. Second, philanthropic CSR had positive effects on social satisfaction. Third, economic satisfaction and social satisfaction had positive effects on franchisee's loyalty to the franchisor. Conclusions - The important implications of this study have as follows. First, this study has found that economic CSR can create a high economic satisfaction and social satisfaction of franchisee. Second, this findings suggest that the philanthropic CSR can improve the social satisfaction of franchisee. Third, this results demonstrate, for the first time, that the economic satisfaction and social satisfaction of franchisees can play a crucial role to improve their loyalty for the franchisor and pursue mutual development by maintaining the stable business relationship with a franchisor. In this investigation there are at least three limitations. First, Because the research sample is limited to the foodservice franchisee in Seoul, it is not possible to be representativeness of the national franchisee. Second, CSR activities are mostly focused on large franchise companies. Therefore, there is a limit to the research approach. Finally, this study examined the effect of economic CSR and philanthropic CSR on the loyalty of franchisors, but in the future study, it is necessary to analyze the relationship between CSR and loyalty of franchise companies by collecting specific quantitative data such as re-contract rate and management performance of franchisees.

• Journal of Advanced Navigation Technology
• /
• v.26 no.3
• /
• pp.172-178
• /
• 2022

In this paper, water meter AMR(automatic meter reading), one of the core technologies of smart water grid, using LoRa IoT network is studied. The main content of the research is to develop the network system and show the test results that one PC server receives the readings of water meters from multiple households through LoRa communication and stores them in the database, and at the same time sends the data to the web server database through internet. The system also allows users to monitor the meter readings using their smartphones. The hardware and firmware of the main board of the digital water meter are developed. For a PC server program, MDMS(meter data management system) is developed using Visual C#. The app program running on the user's smartphone is also developed using Android Studio. By connecting each developed parts, the total network system is mounted on a flow test bench in the laboratory and tested. For the fields test, 5 places around the university are selected and the transmission distances are tested. The test result show that the developed system can be applied into the real field. The developed system can be expanded to various social safety nets such as monitoring the living alone or elderly with dementia.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.99-105
• /
• 2022

As the chip size gets smaller, the width of the electrode line is also fine, and the density of interconnections is increasing. As a result, RC delay is becoming a problem due to the difference in resistance between the capacitor layer and the electrical conductivity layer. To solve this problem, the development of electrodes with high electrical conductivity and dielectric materials with low dielectric constant is required. In this study, we developed low dielectric ink by mixing commercial PSR which protect PCB's circuits from external factors and PI with excellent thermal property and low-k characteristics. As a result, the ink mixture of PSR and PI 10:3 showed the best results, with a dielectric constant of about 2.6 and 2.37 at 20 GHz and 28 GHz, respectively, and dielectric dissipation was measured at about 0.022 and 0.016. In order to verify the applicability of future applications, various line-width transmission lines produced on Teflon were evaluated, and as a result, the loss of transmission lines using low dielectric ink mixed with PI was 0.12 dB less on average in S21 than when only PSR was used.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.23-34
• /
• 2022

Cities around the world are increasing their demand for Urban Air Mobility (UAM) aircraft due to traffic congestion with population concentration. Aircraft with various shapes depending on fixed-wing and propulsion systems, are being prepared for commercialization. Airworthiness certification is required as it is a manned transportation vehicle that flies in the city center and transports people on board. UAM aircraft are vulnerable to lightning and HIRF environments due to the increasing use of composite materials, the use of electric motors, and use of electronic equipment. Currently, the development of certification technology, guidelines, and requirements in lightning and HIRF environments for UAM aircraft is incomplete. In this study, the certification procedures for lightning and HIRF indirect impacts of rotorcraft shown in AC 20-136B and AC 20-158A issued by the Federal Aviation Administration (FAA), were verified and applied to the computerized simulation of UAM aircraft. The impact of lightning and HIRF on ducted fan UAM aircraft was analyzed through computerized simulation, and the basis for establishing practical guidelines for certification of UAM aircraft to be operated in the future is presented.