• Resources Recycling
• /
• v.11 no.6
• /
• pp.3-11
• /
• 2002

Recently, waste printed circuit board (PCB) has significantly increased in its amount due to the rapid development of electronic industries. Since several kinds of noxious materials and also valuable metals are contained in it, the waste PCB is in an urgent need of recycling for the dual purposes for the prevention of environmental pollution and recovery of valuable resources. Also, the catalyst which equipped in the exhaust pipes of automobiles to reduce emission of air pollutants contains precious met-als so that their recovery from the waste auto-catalysts is required. In this study, the recovery of valuable metals from waste PCB and auto-catalyst by arc furnace melting process has been investigated, which is known to be very stable and suitable f3r less production of pollutants due to its high operating temperature. The effect of the kind of flux on the recovery of precious metals was examined by using quicklime, converter slag, and copper slag as the flux. In addition, the influence of direct and alternating current and the applying direction of direct current has been investigated. It was observed that using converter or copper slag as a flux was more desirable for a higher efficiency in the precious metal recovery compared with quicklime. For the effect of current, application of direct current taking the bottom as a negative pole generally showed a better efficiency for the extraction of valuable metals from waste PCB, which was also observed for the case of waste auto-catalyst. The average recovery of precious metals from both wastes by arc furnace melting process was very high, which was up to in the range of 95～97%.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.114-119
• /
• 2002

A immobilizing device that is essential for correct lung and lens shielding with homogenous dose distribution in fractionated total body irradiation was developed and it's efficiency was evaluated. The main frame was made of stainless steel bar (5 cm in diameter) to withstand up to 230 cm in height and 100 kg in weight to prevent any injury even in unconsciousness condition. The saddle was designed to adjust the body weight and hight of standing patients. Chest and back supporter were made of 1 cm acryl which could fix the lung block and cassette holder. Leather and sponge pedding were used for head rest to keep patients comfortable. The device was strongly fixed by specially designed bolts on the bottom panel which was made of 1 cm stainless steel and 10 cm thick wooden board. Precise manipulation ($\pm$2 mm) was possible by upper two pulleys and side handles. Average four minutes twenty five seconds were needed for exact setting in fractionated TBI. No significant difference of lung block location on repeated verification films was confirmed and relatively homogeneous dose distribution was measured in rando phantom experiments and patient treatments ($\pm$5%). This immobilizing device was very efficient to keep correct position of patients, which is essential for better result and less complication in fractionated TBI.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.287-294
• /
• 2003

There are a lot of curved subway stations in Seoul metropolitan area. These must be straightly constructed as many as possible. But some of stations are roundly designed and built in order to avoid pre-existed underground obstacle such as basement of high rise building, underground gas or water pipe line and subway stations from another line. As shown fig 1, one of the biggest problem occurring curved subway station is considered large gap between platform and vehicle when vehicle completely stop at the station. The gap potentially is in existence to subway passenger as very dangerous factors in rush hours. If passenger accidentally drop their food or leg between this gap when they get on the train and train leaves station, the passenger will be seriously injured by vehicle. In this paper, various design and instruments are introduced and best solution for this matter will be presented. In order to eliminate any possibility of accident happened gap between platform and vehicle, KRRI(Korea Railroad Research Institute) have been developed new safety instrument. These technologies were applied for patent by KRRI. These mechanisms will provide confidence as well as safety to Korean subway passenger

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2009

Watermelons (Citrulus vulgaris Schrad) are usually sorted manually by weight, appearance, and acoustic impulse, so grading of maturity and internal quality is subject to inaccuracies. It was necessary to develop a nondestructive evaluation technique of internal watermelon quality to reduce human error. Thus, acoustic characteristics related to internal quality factors were analyzed. Among these factors, three (ripeness, presence of an internal cavity, and blood-colored flesh) were selected for evaluation. The number of peaks and the sum of peak amplitudes for watermelons with blood-colored flesh were lower than for normal fruits. The portable evaluation system has an impact mechanism, a microphone sensor, a signal processing board, an LCD panel, and a battery. A performance test was conducted in the field. The internal quality evaluation model showed 87% prediction accuracy. Validation was conducted on 72 samples. The accuracy of quality evaluation was 83%. The quality of samples was evaluated by an inspector using conventional methods (hitting the watermelon and listening to the sounds), and then compared with prototype results. The quality evaluation accuracy of the prototype was better than that of the inspector. This nondestructive quality evaluation system could be useful in the field, warehouse, and supermarket

• Journal of the East Asian Society of Dietary Life
• /
• v.8 no.1
• /
• pp.36-50
• /
• 1998

The purpose of this study was to investigate quantity food production practices in foodservices by analysing the menus of April, 1996, The questionnaire was developed and responded to by 96 dietitians in Sangju, Munkyung, Gumee, Kimchun, and Andong during November, 1996. The survey was performed by simple random samplings. The results were as follosw; 1. Hospitals and industry served food for thirty days and schools for twenty days. Kimchi was a select-menu for hospitals and one side dish for industry and schools. The type of menu was a single use menu which consisted of cooked rice, soups and three side dishes. 2. The most frequently used ingredients were green onions, rice, carrots, onions, Korean radish roots, pork, eggs, glutinous rice, and milk. Kimchis were served most frequently in all food services and cooked rices and soups were next. 3. The age of most of the respondents was 26 to 30.54.2% of subjects were juniou college graduates and 77.1% were single. Fifty seven point three percent of the dietitians lived with family relatives, or friends. 87.5% of the dietitians had been working for 1 to 5 years. 4. Most foodservices were self-operated. The number of meals served was determined by meal coupon counting in hospitals(37.5%), meal board counting in industry(29.2%), and attendance card counting in schools(41.1%) The cost of sales per meal was approximately 2,450 won in hospitals and was approximately 1,100 won in industry and schools. The average number of days per menucycle was 7.4 in hospitals. 10.3 in industry and 25.5 in schools. Hospitals, industry, and schools held about 118, 265 and 263 recipes respectively. The average number of dietitians was 2.6 in hospitals and 1.0 in industry and schools. Except for the number of recipes, the general practices of foodservices were significantly different(P<0.05). 5. In the general quantity food production, food and seasonings measuring was hardly done. the percentage of foodservices using chemical seasonings was higher in hospitals and industry than in schools. the most important concern was taste, Registered cooks were employed in 75% of schools but only 50.0% in hospitals and 20.8% in industry. Most of the dietitians respinded that their cooks skill was not bad. The education of unregistered cooks was performen once or two times a month in hospitals and industry, and in schools performed everyday. The problem when educating cooks was the lack of cooking skill of the dietitians in schools, and the lack of time in hospitals, and the negative attitude toward education in industry. The method for improving cooking in all foodservices was OJT, or the extension of education facilities and the development and dissemination of standard recipes. The frequency of throwing away leftovers was higher in hospitals. But in industry, the frequency of saving leftovers was higher. 6. Though all foodservices have standard recipes, the number that used them was low, Another problem is that standard recipes resulted in leftovers. The inconveniences of using standard recipes were the difficulty of applying standard recipes to various numbers of customers the complication of use, or facility insufficiency.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.193-214
• /
• 2012

The interest on cruise service has been increased due to the economic development and income growth all over the world during last several decades. However, cruise industry in Korea is located in the initiating stage and the service is just focused on costal cruise service. This study investigates relationship between influencing factors of the selection attributes of cruise service on tourism satisfaction and behavioral intention. Additionally, the study aims to provide information to establish customer-oriented marketing strategies for cruise tour service. Literature review is conducted to find out the factors in order to meet the future users preference and expectations. The data was collected on-board customers of "One Night Cruise" on Panstar Line. The result of the study shows that a certain number of factors are statistically significant on the cruise tour intention of potential customers. It shows that there is significant difference related to the using purpose and the usage attitude. Managers in the cruise company are able to utilize the practical implications of the present study when the cruise service launches in Korea. This study exists limitations that samples are not sufficient and the research can not be generalized due to the inadequate samples of target company.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.107-113
• /
• 1999

The purpose of this study was to develop a miniature imaging gamma probe with high performance that can detect small or residual tumors after surgery. Gamma probe detector system consists of NaI(Tl) scintillator, position sensitive photomultiplier tube (PSPMT), and collimator. PSPMT was optically coupled with 6.5 mm thick, 7.62 cm diameter of NaI(Tl) crystal and supplied with -1000V for high voltage. Parallel hexagonal hole collimator was manufactured for characteristics of 40-mm hole length, 1.3-mm hole diameter, and 0.22 mm septal thickness. Electronics consist of position and trigger signal readout systems. Position signals were obtained with summing, subtracting, and dividing circuit using preamplifer and amplifier. Trigger signals were obtained using summing amplifier, constant fraction discriminator, and gate and delay generator module with preamplifer. Data acquisition and processing were performed by Gamma-PF interface board inserted into pentium PC and PIP software. For imaging studies, flood and slit mask images were acquired using a point source. Two hole phantom images were also acquired with collimator. Intrinsic and system spatial resolutions were measured as 3.97 mm and 5.97 mm, respectively. In conclusion, Miniature gamma probe images based on the PSPMT showed good image quality, we conclude that the miniature imaging gamma probe was successfully developed and good image data were obtained. However, further studies will be required to optimize imaging characteristics.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.285-298
• /
• 2009

According to the development of ubiquitous technologies, sensor networks is used in various area. In particular, medical field is one of the significant application areas using sensor networks, and recently it has come to be more important according to standardization of the body sensor networks technology. There are special characteristics of their own for medical sensor networks, which are different from the one of sensor networks for general application or environment. In this paper, we propose a hierarchical medical sensor networks structure considering own properties of medical applications, and also introduce transmission mechanism based on hierarchical structure. Our mechanism uses the priority and threshold value for medical sensor nodes considering patient's needs and health condition. Through this way Cluster head can transmit emergency data to the Base station rapidly. We also present the new key establishment mechanism based on key management mechanism which is proposed by L. Eschenauer and V. Gligor for our proposed structure and transmission mechanism. We use key provisioning for emergency nodes that have high priority based on patients' health condition. This mechanism guarantees the emergency nodes to establish the key and transmit the urgent message to the new cluster head more rapidly through preparing key establishment with key provisioning. We analyze the efficiency of our mechanism through comparing the amount of traffic and energy consumption with analysis and simulation with QualNet simulator. We also implemented our key management mechanism on TmoteSKY sensor board using TinyOS 2.0 and through this experiments we proved that the new mechanism could be actually utilized in network design.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.2
• /
• pp.55-61
• /
• 2017

In radio astronomy, high-capacity HDDs are being used to save huge amounts of HDDs in order to record the observational data. For VLBI observations, observational speeds increase and huge amounts of observational data must be stored as they expand to broadband. As the HDD is frequently used, the number of failures occurred, and then it takes a lot of time to recover it. In addition, if a failed HDD is continuously used, observational data loss occurs. And it costs a lot of money to buy a new HDD. In this study, we developed the integrity verification system of the Serial ATA HDD using FirmOS. The FirmOS is an OS that has been developed to function exclusively for specific purposes on a system having a general server board and CPU. The developed system performs the process of writing and reading specific patterns of data in a physical area of the SATA HDD based on a FirmOS. In addition, we introduced a method to investigate the integrity of HDD integrity by comparing it with the stored pattern data from the HDD controller. Using the developed system, it was easy to determine whether the disk pack used in VLBI observations has error or not, and it is very useful to improve the observation efficiency. This paper introduces the detail for the design, configuration, testing, etc. of the SATA HDD integrity verification system developed.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.27-41
• /
• 1998

The communication model has been accepted as the basic research paradigm of cartography since Board(1967) discussed the map/model analogy. In that paradigm, the function of maps was limited to the media of communication, and the functionality of maps was extremely emphasized. Therefore the model could not play its own role under the new environments such as computer, GIS, scientific visualization. Nowadays, the model has been attacked on several grounds and several alternatives have been suggested. Among the objections raised are (1) geographic visualization in which maps are considered as the tool of scientific visualization, (2) the contributions of art which are ignored in the positivist cartographic research, and (3) deconstructionist arguments which deny the scientific epistemology of map as an objective form of knowledge and recognize the textuality of maps including their metaphorical and rhetorical nature. Since a publication by McCormick et al, the scientific visualization based on the powerful computer graphics is used in a wide context. Maps are treated as the tools of scientific visualization and emphasis is on exploration of the geographic data to gain understanding and insight in the geographic visualization processes. The research on geographic visualization have stayed in the early stage of developing the conceptual model and the basic visualization tools. But, it is expected that the geographic or visual thinking which is emphasized in the geographic visualization will contribute the reestablishment of links between cartography and geography. Also, the development of scientific visualization tools and strategies will offer the opportunities to suggest a fresh idea, to synthesize information and develop holistic approaches to geographical problems.