• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.179-187
• /
• 2010

Corrosion of rebar embedded reinforced concrete is the main cause of collapse and degradation of reinforced concrete structure. Degradation occurs in reinforced concrete structures from corrosion caused by the Chloride that the damage other than the severe degradation of the structure in terms of maintenance and construction when the huge expense required and deciding terms is hard. Therefore, early detection of rebar corrosion is important for efficient maintenance and repairing and planning. Meanwhile, how to evaluate the corrosion of the non-destructive measurements have been used a lot. In particular CM-II (corrosion meter) is used to measurement the natural potential, polarization resistance and the resistivity of the concrete, but has some disadvantages. Embedded mini-sensor has been developed in order to overcome these disadvantages. So Measurement corrosion for using the mini-sensor compares with the measured results CM-II (corrosion meter), the developed mini-sensor verify the validity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.91-99
• /
• 2018

Mechanical Properties of Rock Slope as a safe and effective interpretation should be thoroughly investigated. Clinometer, however, this new measurement due to the restrictions of the research for the joint orientation is needed. In this study, characteristics of the joint orientation can be used to analyze the joint orientation of developing a joint survey system that can be applied to the field. The system is developed and Analysis software to hardware. Hardware is composed to measure the joint orientation of measuring module, measuring the transfer of data transfer module. From the software is measuring module from the data to analyze the orientation of the joint development, and drone joint orientation survey system named. Can not be measured by the investigation, including regional development approach is a system that has been difficult if the Field Application of the lab test results of the joint orientation and effectively.

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.243-253
• /
• 2013

As global competition is more intensive, SCM is becoming more and more important in order to achieve competitiveness. It is necessary for firms to understand weak points among the integrated supply chain through supply chain assessment in order to implement SCM successfully and cost-effectively. In this paper, we review previous studies of SCM performance measurements and propose a supply chain assessment framework for shipbuilding industry, which is one of the major ETO industry. Based on 3 supply chain domains which are demand, supply, and product management, we decompose the whole supply chain process into 3 level lower processes and propose capability measurement matric for shipbuilding firms. A case study has been conducted to validate the proposed framework and results are presented at the end.

• Journal of the Korean Home Economics Association
• /
• v.41 no.6
• /
• pp.1-12
• /
• 2003

The purpose of this study were to analyze the anthropometric data of feet of Korean women with aging, to categorize the women's foot shapes, and to compare the shoe size according to the foot shapes in order to provide the basic information for more comfortable shoes. Subjects of this study were 181 women over age 20. They were measured with the direct measurement method and the indirect measurement method. 26 items were measured from the right foot and 6 items were taken on foot outline. Factor analysis, cluster analysis, analysis of variance, post-hoc test, and cross tabs were peformed for statistical analysis of the data by SPSS program. There were significant differences in height items, breadth items, girth items, and angle items by subjects' age. The older subjects' feet were wide and thick with big deformity on toes. The arch height of the older ones was low. This implicates that the degree of deformity on toes, the foot ratio, the foot girth, the foot breath and the arch height as well as the foot length are needed to be considered in developing comfortable shoes. Nine foot construction factors were extracted by the factor analysis of anthropometric measurements; foot size factor, heel and instep factor, malleolus lateralis factor, malleolus medialis factor, foot shape factor, shape of toes factor, heel height factor, big toe height factor, and internal factor. On the basis of the cluster analysis, three different foot shapes were categorized. Type 1 was large and wide foot with little deformity on little toe. Type 2 was medium foot with deformation of big toe, and with the lowest arch height. Type 3 was small and narrow foot with the highest arch height. Distribution of shoe size according to the foot shape was analyzed. The ball of foot breath was of wide distribution than the ball of foot girth. This implicates that girth items and breath items of the foot should be enclosed for the same foot length in the shoe sizing system.

• Journal of Radiation Protection and Research
• /
• v.41 no.4
• /
• pp.328-332
• /
• 2016

Background: Boron Neutron Capture Therapy (BNCT) is a new radiation therapy. In BNCT, there exists some very critical problems that should be solved. One of the severest problems is that the treatment effect cannot be known during BNCT in real time. We are now developing a SPECT (single photon emission computed tomography) system (BNCT-SPECT), with a cadmium telluride (CdTe) semiconductor detector. BNCT-SPECT can obtain the BNCT treatment effect by measuring 478 keV gamma-rays emitted from the excited state of $^7Li$ nucleus created by $^{10}B(n,{\alpha})$ $^7Li$ reaction. In the previous studies, we investigated the feasibility of the BNCT-SPECT system. As a result, the S/N ratio did not meet the criterion of S/N > 1 because deterioration of the S/N ratio occurred caused by the influence of Compton scattering especially due to capture gamma-rays of hydrogen. Materials and Methods: We thus produced an arrayed detector with two CdTe crystals to test cross talk phenomenon and to examine an anti-coincidence detection possibility. For more precise analysis for the anti-coincidence detection, we designed and made a collimator having a similar performance to the real BNCT-SPECT. Results and Discussion: We carried out experiments with the collimator to examine the effect of cross talk of scattering gamma-rays between CdTe elements more practically. As a result of measurement the coincidence events were successfully extracted. Conclusion: We are now planning to carry out evaluation of coincidence rate from the measurement and comparison of it with the numerical calculations.

• The KIPS Transactions:PartD
• /
• v.8D no.3
• /
• pp.247-256
• /
• 2001

Software is developing toward having more large scale and many functions day by day. Also, user’s requirements level for software is being high, especially, requirements for software quality is being high continuously. Methods which can satisfy such User’s requirements is being studied in various viewpoint. First of all, study about quality evaluation system and methodology is energetically in progress in viewpoint to improve quality of software by feed-back software quality evaluation result to developers. In this paper, we define metrics according to a system and developed quality measurement tables according to internal characteristics system of quality characteristics, subcharacteritics, internal characteristics for reliability between quality characteristics of international standard, ISO/IEC 9126 about software quality. And we propose evaluation results about development products using internal characteristics.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.5
• /
• pp.259-266
• /
• 2018

This is the study for developing the hetero-core optical fiber sensors which are purpose to measure the prestress of PSC bridges during the life cycle period. The goal of this study is to improve the resolution of hetero-core sensors. As a result of the test, it is possible to measure the displacement in $2{\mu}m$ increments. In other words, if the length of the sensor module is 30cm, it is possible to measure the prestress variations in 0.2MPa increments at specified compressive strength of concrete(fck) of 40MPa by Hook's Law. So it can be useful for development of a sensor module measuring internal prestress measurement.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.6 s.40
• /
• pp.73-80
• /
• 2004

A nonlinear time-domain system identification algorithm using measured acceleration data is developed for structural damage assessment. To take account of nonlinear behavior of structural systems, an output error between measured and computed acceleration increments has been defined and a constrained nonlinear optimization problem is solved for optimal structural parameters. The algorithm estimates time-varying properties of stiffness and damping parameters. Nonlinear response of restoring force of a structural system is recovered by using the estimated time-varying structural properties and computed displacement by Newmark-$\beta$ method. In the recovery, no pre-defined model for inelastic behavior has been assumed. In developing the algorithm, noise and incomplete measurement in space and state have been considered. To examine the developed algorithm, numerical simulation and laboratory experimental studies on a three-story shear building have been carried out.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.131-140
• /
• 2011

File pollution (i.e., sharing of corrupted files, or contaminating index information with bogus index records) is a de facto problem in many file sharing Peer-to-Peer (P2P) systems in use today. Since pollution squanders network resources and frustrates users with unprofitable downloads (due to corrupted files) and unproductive download trials (due to bogus index records), the viability of P2P systems (and similar distributed information-sharing applications) is questionable unless properly addressed. Thus, developing effective anti-pollution mechanisms is an immediate problem in this literature. This paper provides useful information and deep insight with future researchers who want to design an effective anti-pollution mechanism throughout an extensive measurement study of user behavior and file pollution in a representative DHT-based P2P system, the Kad network.

• Perspectives in Nursing Science
• /
• v.10 no.2
• /
• pp.133-140
• /
• 2013

Purpose: This study aimed to investigate the perspective of consumers in healthcare services regarding patient safety. Methods: The study was a descriptive study using a self-reported questionnaire. The questionnaire was based on the Senior Empowerment and Advocacy in Patient Safety (SEAPS) questionnaire, which was designed to assess patient safety health beliefs. The survey was conducted online and a convenient sample of 302 adults participated in total. The reliability of the measurement (Cronbach's ${\alpha}$) was 0.758 in attitude (ATT), 0.546 in out-come efficacy (OE), 0.757 in self-efficacy (SE), and 0.703 in behaviors (BEH). Results: The average patient safety awareness score of the healthcare service consumers was 2.72 (ATT), 2.91 (OE), 2.87 (SE), and 2.27 (BEH). Our analysis indicated that there were no differences in ATT, BEH, or SE by gender, age, or education level. However, in OE and the total score of the four subscales, there were significant differences by age and gender. Correlations were identified between BEH and SE (r=0.409, p<.01), BEH and OE (r=0.202, p<.01), ATT and SE (r=0.358, p<.01), and OE and SE (r=0.241, p<.01). Conclusion: This study measured consumer perspectives concerning patient safety. The findings demonstrate the need for developing a measurement tool to assess consumer's perception of patient safety, considering Korean healthcare system and cultural context.