• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.713-720
• /
• 2008

The purpose of this study was to propose the method reproducing three dimensional figure data to a reconstructed body by the styrofoam board. To make the reconstructed body, the 3D figure data were rotated to make symmetry and the surfaces were edited. The horizontal curves were gathered equally-spaced based on the waist horizontal plane. we proposed the process to cut the styrofoam board according to the horizontal curves, to assemble them to organize the shape of the body figure and to coat the surface with the knitted. The 3-dimensional figure data of straight type, swayback type, lean-back type and bend-forward type were selected and the reconstructed bodies were made as above. And the compatibility was verified by the measurement comparison and deviations between 3-dimensional figure data and reconstructed body.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1191-1194
• /
• 2003

At present, the fabrication of optical filter for optical communication mostly depends on handwork, and only a few companies are propelling semi-automatic systems compounded with automatic and hand-operated methods. The measurement evaluation of optical filters is not commonly useful, so it causes difficulties in the producing field. And the packaging process becomes a very unstable process because the filters are judged from the results that they are not measured and immediately packaged during that process. In this situation, the automatic assembly system of optical filter for communication is extremely important and has begun to make its appearance as the most necessary technology for developing optical communication component with high-functionality. In this paper, we constructed systems of assembly and performance evaluation for micro optical collimator. And by using that, we designed a system capable of performance evaluation and assembly of film filter of about 30 $\mu\textrm{m}$ thickness as well as optical filter for common communication.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.759-762
• /
• 2002

Automobile aeroacoustics Is a developing area of technology where experimental and theoretical tools are being continuously refined to understand, analyze and modify the noise-generating mechanisms in the vehicle flow. Main sources of ground vehicle exterior noise are the tires (tire/road interaction) and the unsteady flow field around the vehicle. In this study, the sound source localization of a rolling tire was applied to the measurement of radiated sound by using an acoustic mirror system. A possible flow pattern that develops is suggested based on detailed wind tunnel investigations with a rotating wheel in contact with a moving belt.

• Asia pacific journal of information systems
• /
• v.6 no.1
• /
• pp.75-108
• /
• 1996

Expert Systems (ES) have been successfully applied to bank loan decisions. However, with regard to bank loan decisions, most loan officers approach the acquisition of an ES with apprehension, which implies that organizational resources devoted to the development and implementation of ES may have been wasted or misused. Because the primary cause of the users resistance to use ES are more significantly related to the behavioral elements rather than technical elements, applying appropriate behavioral theory to the well representative sample group of the whole bank loan officers in the United States with a very accurate measurement tool can provide some clues for developing successful ES for bank loan officers. In this study : 1) Vroom's (1964) expectancy theory was selected to explain bank loan managers' motivation to use an ES ; and 2) the ANN model's prediction power to estimate bank loan officers' motivation levels of using an ES was examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1394-1397
• /
• 2003

The first thing in developing injection molding and extrusion with microcellular foaming process is to get a grip on one phase state's rheology of gas and polymer solution. Understanding rheology is essential to design mold or die. and it is so important to control the condition of process. Also, this data is got the utmost out of simulation carrying out. In this paper, we will see the measurement of rheology in one phase that mixed polypropylene which contains talc with carbon dioxide of super critical fluid state, and will compare its result with the simulation result.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.68-71
• /
• 2000

A tool holder system has been designed to measure cutting forces in diamond turning. This system includes a 3-component piezo-electric tranducer. In this research, tool holder system is modeled by considering the element dividing, material properties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of structure is simulated by MSC/NASTRAN, for the purpose of developing the effective design. In addition, tool holder system is verified by vibration test using accelerometer. This system will aid to the development of Fast Tool Servo.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.882-888
• /
• 2008

The increase in logistics and the emergence of high speed vehicles are aggravating the noise problem, and disturbing large numbers of people. Therefore, growing attention is being paid to the creation and utilization of a noise map in order to grasp and predict the influence of noise, and to establish a policy that effectively reduces noise. However, so far there has been little progress in developing a predictive formula for railway noise, and a noise prediction program suitable for the domestic environment. Therefore, there is a need for a method to apply the overseas prediction formula to domestic railway vehicles. This study evaluated the prediction method, the result of which is similar to that of a real measurement, using a noise map. It also employed a commercial software program, SoundPlan, to predict noise.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.9
• /
• pp.593-598
• /
• 2015

In this paper, the silencer for large caliber gun to reduce the propagation of gun-generated noise was studied. The results of structural analysis and firing test were described. Structural analysis was conducted by using a commercial program, ANSYS, and showed that there was not any structural problem. The sound pressure level was diminished about 10 dB by the silencer adapted in front of the gun and the soundness of the material was verified from the internal pressure measurement. The reduction of weight, improvement of durability and speed-up of actuating device have to be studied later to improve the usability of silencer for large caliber gun.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.311-315
• /
• 2012

In these days, promising renewable energy, wind turbine is clean energy but has an environmental pollutant which is noise. Noise assessment is one of the major performance evaluations for wind turbine and nowadays, developing and research for measurement and method of the assessment considering environmental pollutants is being important. Object in this study is that figuring out sound power characteristic of the gearbox for wind turbine through measuring sound intensity. In back-to-back test, we can figure out the noise characteristic of the gearbox for wind turbine through comparing and measuring sound pressure level, sound power level in operating at the each load condition respectively.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.171-181
• /
• 2011

Though food safety efforts of the government has been increasing, but the health hazards resulting from food does not stop and thus increases consumers' anxiety and distrust of government. For more reliable safety management, developing analysis and intake measurement methods and strengthening regulatory control with strict criteria is necessary. In addition, as not only the known hazards by now, but also unknown but obvious hazards are simultaneously ongoing in current environments, the unified risk management and health assessment for food, health food and medicines from the media is critical. As risks and damage to health may show up after a long time after exposure, preventive measures and strategies for safety control is also needed.