• 한국산학기술학회논문지
• /
• 제11권8호
• /
• pp.2727-2733
• /
• 2010

본 연구에서는 비닐하우스 기존모델과 이번에 개발한 모델의 모델링 하였으며, 해석은 폭설이 250mm 왔을 때 쌓인 눈의 하중에 의하여 비닐하우스가 어떠한 변형을 하는 지를 구조해석을 통하여 비교하는 것이 주된 목적이다. 기존의 비닐하우스와 개발한 비닐하우스의 구조에 있어서 개발 모델을 적용함으로서 기존 모델보다 비용이 덜 들고 최대 50% 이상의 변형량을 줄일 수 있어 안정성이 좋고, 그 제작비용도 절감할 수 있다.

• 한국멀티미디어학회논문지
• /
• 제22권11호
• /
• pp.1300-1312
• /
• 2019

BSTRACT In this paper, PM10 forecast model using DNN(Deep Neural Network) is developed for Seoul region. The previous Julian forecast model has been developed using weather and air quality data of Seoul region only. This model gives excellent results for accuracy and false alarm rates, but poor result for POD(Probability of Detection). To solve this problem, an WA(Wide Area) forecasting model that uses Chinese data is developed. The data is highly correlated with the emergence of high concentrations of PM10 in Korea. As a result, the WA model shows better accuracy, and POD improving of 3%(D+0), 21%(D+1), and 36%(D+2) for each forecast period compared with the Julian model.

• Journal of Biosystems Engineering
• /
• 제11권2호
• /
• pp.66-75
• /
• 1986

In order to improve the traditional post harvest system in Korea, a model for mechanized grain drying and storage facilities was developed. Also, a computer program for the model system was developed. For the study, flat type steel bin and circulation type dryer were selected for the model and Fortran language was used for the computer program. This program was tested by using various practical data. The following results were obtained from the study: 1. The general model developed can be used for designing a rough rice drying and storage facility within the range from 100 ton to 1000 ton capacity. 2. Major output of the computer program for designing a model system were as follow; a. The dimension of the plant. b. The storage bin size, dryer number and dryer size. c. The dimension of individual equipment and its required HP. d. Capital requirement and operating cost of the model system.

• 한국산업융합학회 논문집
• /
• 제22권1호
• /
• pp.29-37
• /
• 2019

A new permanent magnet biased hybrid maglev actuator is developed. Compared to the classical hybrid maglev actuators, the new maglev has unique flux paths such that bias fluxes are separated with control flux paths. The control flux paths have minimum reluctances only developed by air gaps, so the currents to produce control fluxes can be minimized. The consumed power to operate this maglev system can also be minimized. The gravity load can be compensated with the static magnetic forces developed by the permanent magnet bias fluxes while external disturbances are controlled with the bidirectional AC magnetic forces developed by control fluxes by currents. 1-D circuit model is developed for this model such that the flux densities and magnetic forces are extensively analyzed. 3-D finite element model is also developed to analyze the performances of the maglev actuator.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.93-107
• /
• 2016

Seismic fragility analysis is a probabilistic decision-making framework which is widely implemented for evaluating vulnerability of a building under earthquake loading. It requires ingredient named probabilistic model and commonly developed using statistics requiring collecting data in large quantities. Preparation of such a data-base is often costly and time-consuming. Therefore, in this paper, by developing generic seismic drift demand model for regular-multi-story steel moment resisting frames is tried to present a novel application of the probabilistic decision-making analysis to practical purposes. To this end, a demand model which is a linear function of intensity measure in logarithmic space is developed to predict overall maximum inter-story drift. Next, the model is coupled with a set of regression-based equations which are capable of directly estimating unknown statistical characteristics of the model parameters.To explicitly address uncertainties arise from randomness and lack of knowledge, the Bayesian regression inference is employed, when these relations are developed. The developed demand model is then employed in a Seismic Fragility Analysis (SFA) for two designed building. The accuracy of the results is also assessed by comparison with the results directly obtained from Incremental Dynamic analysis.

• Journal of Ship and Ocean Technology
• /
• 제10권4호
• /
• pp.24-33
• /
• 2006

So far, the generation of a hull structural analysis model, that is, a finite element model of a hull structure, has been manually performed by a designer using design experience, and thus has required lots of time because of many constraints, the complexity, and the huge size of the hull structure. To make this task automatic, an algorithm for generating the hull structural analysis model is developed using the seam information of the hull structure. A generating system of the hull structural analysis model is implemented based on the developed algorithm. The applicability of the developed algorithm is demonstrated by applying it to the generation of the global and hold structural analysis models of a deadweight 300,000 ton VLCC (Very Large Crude oil Carrier). The results show that the developed algorithm can quickly generate these models at the initial design stage.

• 대한산업공학회지
• /
• 제20권3호
• /
• pp.117-124
• /
• 1994

In this paper an inventory model is presented for determining the ordering schedule in which the demand rate is changing linearly with time and the decay is assumed to be a constant rate of the on-hand inventory. An easy to use heuristic is developed to find the times and sizes of replenishments so as to keep the total of ordering, inventory carrying and deteriorating costs as low as possible. Solutions of the model to test problems show that our heuristic model outperforms other existing models in the literature without sacrificing the computational complexity. When there is no deterioration, the model developed is related to the corresponding model of nondeteriorating items.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1721-1726
• /
• 2004

Heat rate is a representative index to estimate the performance of turbine cycle in nuclear power plant. Accuracy of heat rate calculation is dependent on the accuracy of measurement for plant status variables. Uncertainty of heat rate can be modeled using uncertainty propagation model. We developed practical estimation model of heat rate uncertainty using the propagation and regression model. The uncertainty model is used in the performance analysis system developed for the operating nuclear power plant.

• 한국농공학회지
• /
• 제34권2호
• /
• pp.40-48
• /
• 1992

A model using a linear programming technique was developed to operate gates for the optimum management of small of medium size agricultural reservoirs. To predict the inflow into the reservoirs the WASHMO model, which was a single event hydrology model, was modified and used. To test the applicability, the developed model was applied to two reservoirs located in Kyungpook province. The results showed that the model could be used for the optimum gate operation of the agricultural reservoirs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.728-732
• /
• 2014

Macro-model of magnetic tunnel junction (MTJ) for spin transfer torque magnetic random access memory (STT-MRAM) has been developed. The macro-model can describe the dynamic behavior such as the state change of MTJ as a function of the pulse width of driving current and voltage. The statistical behavior has been included in the model to represent the variation of the MTJ characteristic due to process variation. The macro-model has been developed in Verilog-A.