• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.746-756
• /
• 2017

An algorithm is developed to generate measurement data of deep space network for Korea Pathfinder Lunar Orbiter (KPLO) mission. The algorithm can provide corrected measurement data for the Orbit Determination (OD) module in deep space. This study describes how to generate the computed data such as range, Doppler, azimuth angle and elevation angle. The geometric data were obtained by General Mission Analysis Tool (GMAT) simulation and the corrected data were calculated with measurement models. Therefore, the result of total delay includes effects of tropospheric delay, ionospheric delay, charged particle delay, antenna offset delay, and tropospheric refraction delay. The computed measurement data were validated by comparison with the results from Orbit Determination ToolBoX (ODTBX).

• Therapeutic Science for Rehabilitation
• /
• v.12 no.2
• /
• pp.43-53
• /
• 2023

Objective : In this study, the rehabilitation motivation evaluation tool for stroke patients was identified, and the characteristics of the evaluation tool were analyzed to analyze the conceptual framework and characteristics used in the composition of the evaluation contents. Methods : From 2000 to May 2022, documents registered in major domestic and foreign databases (PubMed, NDSL, Medline, and EMbase) were searched and selected according to the selection and exclusion criteria. The evaluation tools used in the selected documents were analyzed, and the characteristics of this evaluation tool were analyzed. Results : A total of 30 documents were selected, and they were classified into a total of five rehabilitation motivation evaluation tools. The most widely used in Korea was the measurement tool for rehabilitation motivation for the disabled, and the most widely used overseas was the intrinsic motivation inventory. Three evaluation tools constructed the evaluation contents based on the self-determination theory, and two constructed the evaluation contents through expert agreement. The number of evaluation items and 8 to 45 items were varied, and the evaluation scale was also used in various ways from 4 to 7 point scale. Conclusion : It was possible to identify the evaluation tools mainly used for the evaluation of rehabilitation motivation, and to identify the main conceptual framework based on the development of the rehabilitation motivation evaluation tool. The results of this study are expected to be used as basic data for research on the development of rehabilitation motivation evaluation tools for stroke patients in the future.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.40-45
• /
• 2016

Interrupted cutting has different cutting characteristics compared with continuous cutting. In interrupted cutting, the workpiece has a groove that regularly impacts the cutting tool and workpiece. Therefore, tool damage occurs rapidly, and this increases the cutting force and surface roughness. In this study, we performed interrupted cutting of carbon steel for machine structure (SM45C) using a coated carbide tool (TT7100). To predict the cutting force, we analyzed the experimental results with a regression analysis. The results were as follows: We confirmed that the factors affecting the principal force and radial force were cutting speed, depth of cut, and feed rate. From the multi-regression analysis, we deduced regression equations, and their coefficients of determination were 89.6, 89.27, and 28.27 for the principal, radial, and feed forces, respectively. This means that the regression equations were significant for the principal and radial forces but not for the feed force.

• Structural Engineering and Mechanics
• /
• v.72 no.4
• /
• pp.469-477
• /
• 2019

The understanding of tool-rock interaction mechanism is of high essence for improving the rock breaking efficiency and optimizing the drilling parameters in mechanical rock breaking. In this study, the tool-rock interaction models of indentation and cutting are carried out by employing the discrete element method (DEM) to examine the rock failure modes of various brittleness rocks and critical indentation and cutting depths of the ductile to brittle failure mode transition. The results show that the cluster size and inter-cluster to intra-cluster bond strength ratio are the key factors which influence the UCS magnitude and the UCS to BTS ratio. The UCS to BTS strength ratio can be increased to a more realistic value using clustered rock model so that the characteristics of real rocks can be better represented. The critical indentation and cutting depth decrease with the brittleness of rock increases and the decreasing rate reduces dramatically against the brittleness value. This effort may lead to a better understanding of rock breaking mechanisms in mechanical excavation, and may contribute to the improvement in the design of rock excavation machines and the related parameters determination.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.2
• /
• pp.75-86
• /
• 2000

In this study, the characteristics of transmitted vibration on HAS(hand-arm system) were identified to evaluate physical load due to the work surface orientation, tool weight and push force during powered drilling tasks. The characteristics of transmitted vibration on work surface orientation showed that the acceleration of transmitted vibration on horizontal work surface was higher than that on the vertical work surface. Regarding the characteristics of transmitted vibration on tool weight, the vibration acceleration level becomes lower as the tool weight becomes heavier. The amount of transmitted vibration on hand-arm system was decreased down to the tool weight of 2.4kg. However, as the tool weight becomes heavier than 2.8kg, the amount of transmitted vibration was increased and had peak value at 3.2kg of tool weight. Regarding the characteristics of transmitted vibration on push force, the vibration acceleration level goes higher, as the push force becomes larger. The characteristics of transmitted vibration on the axis of vibration showed that the direction of $Z_h$ had the highest acceleration compared to the direction of $X_h$, and $Y_h$. The direction of $X_h$, $Y_h$ and $Z_h$ had the highest acceleration of transmitted vibration on the hand, wrist and elbow, respectively. The results of this study showed that the condition which affect the lowest physical load to the subject on the powered drilling task would be working with the 2.4kg of tool weight on the vertical work surface.

• Korean Journal of Community Nutrition
• /
• v.3 no.4
• /
• pp.655-667
• /
• 1998

The Computer-assisted Hazard Analysis and Critical Control Point(HACCP) program has been developed for a systematic implementation of HACCP principles in identifying, assessing and controlling hazards in institutional foodservics operations. The HACCP-based sanitation evaluation tool has been developed, based on the results of the computerized assisted HACCP program in 4 service sites of C contracted foodservice company, including 2 general hospitals with 650-beds, one office operation of 400 meals per day, and one factory foodservice of 1,000 meals per day. All database files and processing programs were created by using Unify Vision tool with Windows 95 of user environments. The results of this study can be summarized as follows : 1. This program consists of the pre-stage for HACCP study and the implementation stage of the HACCP system. 1) The pre-stage for HACCP study includes the selection of menu items, the development of the HACCP recipe, the construction of product flow diagrams, and printing the HACCP recipes and product flow diagrams. 2) The implementation of the HACCP system includes the identification of microbiological hazards, the determination of critical control points based on the decision tree base files. 3) The HACCP-based sanitation evaluation tool consisted of 3 dimensions of time-temperature relationship, personal hygiene, and equipment-facility sanitation. The Cronbach's alphas calculation indicated that the tool was reliable. The results showed that the focus groups rated the mean of importance in time-temperature relationship, personal hygiene, and equipment-facility sanitation as 4.57, 4.59 and 4.55 respectively. Based on the results, this HACCP-based sanitation evaluation tool was considered as an effective tool for assuring product quality. This program will assist foodservice managers to encourage a standardized approach in the HACCP study and to maintain a systematic approach for ensuring that the HACCP principles are applied correctly.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.150-155
• /
• 1997

Rapid Prototyping(RP) is the technique which is used to make prototypes or functional parts directly using the 3-D solid data. Before building the prototype, several processes such as transfering 3D data from CAD system(STL) determination of build-direction, adding support structure and slicing are required. Among the above processes. determination of build-direction is the target of this study. The build direction is determined by many factors according to the objective of the user, like part accuracy, number of support structure, build time, amount of trapped volume, etc, But it is not easy to determine the build-direction because there are many factors and some factors have dependent properties with one another. So, in this study the part accuracy, the number of support structures and build time are considered as the main factor to determine the optimal build-direction. To determine the optimal build-direction for increasing part accuracy, sum of projected area which caused stairstepping effect was considered. The less the projected area is the better part accuracy is About the optimal build-direction to minimize the amount of support structure, sum of projected area of facets that require support structures was considered. About the build time, we considered the minimum height of part we intended. About the build time, we considered the minimun height of part we intended to make.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.781-790
• /
• 2012

The HyperGam program was developed for the analysis of complex HPGe ${\gamma}$-ray spectra. The previous version of HyperGam was mainly limited to the analysis of ${\gamma}$-ray peaks and the manual logging of the result. In this study, it is specifically developed into a tool for the isotopic analysis of spectra. The newly developed features include nuclide identification and activity determination. An algorithm for nuclide identification was developed to identify the peaks in the spectrum by considering the yield, efficiency, energy and peak area for the ${\gamma}$-ray lines emitted from the radionuclide. The detailed performance of nuclide identification and activity determination was accessed using the IAEA 2002 set of test spectra. By analyzing the test spectra, the numbers of radionuclides identified truly (true hit), falsely (false hit) or missed (misses) were counted and compared with the results from the IAEA 2002 tests. The determined activities of the radionuclides were also compared for four test spectra of several samples. The result of the performance test is promising in comparison with those of the well-known software packages for ${\gamma}$-ray spectrum analysis.

• Transactions of Materials Processing
• /
• v.24 no.5
• /
• pp.361-367
• /
• 2015

The forming limit diagram (FLD) is the most commonly used tool for evaluating of sheet metal formability in the manufacturing field as well as the finite element analysis (FEA)-based design process. Determination of the forming limits is considerably influenced by testing/measuring machines, techniques and conditions. These influences may cause a large scatter in FLD from laboratory to laboratory. Scatter is especially true when the ‘position-dependent method’, as is specified in most national and international standards, is used. In the current study a new ‘time-dependent method’ is proposed, which is to determine the forming limit strains more accurately and reasonably when producing a FLD from experimental data. This method is based on continual strain measurement during the test. The results are compared to those from the existing standardized methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.236-239
• /
• 2002

The electron-atom collision studies has been essentially use\ulcorner for testing and developing suitable theories of the scattering and collision processes, and for providing a tool for obtaining detailed information on the structure of the target atoms and molecules and final collision products. And, the development of that has also been strongly motivated by the need for electron collision data in such fields as laser physic and development, astrophysics, plasma devices, upper atmospheric processes and radiation physics. Therefore, we explains the concept and the principle of determination of the electron collision cross sections for atoms and molecules by using the present electron swarm method.