• Journal of Astronomy and Space Sciences
• /
• v.32 no.3
• /
• pp.229-235
• /
• 2015

We estimated the orbit of the Communication, Ocean and Meteorological Satellite (COMS), a Geostationary Earth Orbit (GEO) satellite, through data from actual optical observations using telescopes at the Sobaeksan Optical Astronomy Observatory (SOAO) of the Korea Astronomy and Space Science Institute (KASI), Optical Wide field Patrol (OWL) at KASI, and the Chungbuk National University Observatory (CNUO) from August 1, 2014, to January 13, 2015. The astrometric data of the satellite were extracted from the World Coordinate System (WCS) in the obtained images, and geometrically distorted errors were corrected. To handle the optically observed data, corrections were made for the observation time, light-travel time delay, shutter speed delay, and aberration. For final product, the sequential filter within the Orbit Determination Tool Kit (ODTK) was used for orbit estimation based on the results of optical observation. In addition, a comparative analysis was conducted between the precise orbit from the ephemeris of the COMS maintained by the satellite operator and the results of orbit estimation using optical observation. The orbits estimated in simulation agree with those estimated with actual optical observation data. The error in the results using optical observation data decreased with increasing number of observatories. Our results are useful for optimizing observation data for orbit estimation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.3
• /
• pp.233-240
• /
• 2000

A small rivers take advantage of not only a site of superb scenic beauty, a play space, a rest place but also a momentous waters reservoir, a drainage on territory residents. Likewise, part of the most massed a life space to a region dwellers shall be extremely in harmony with coexistence space in that every kind plant, animal over again a human being and so on. For improvement planning of small river, various way and model are presented. But, it's want of ability for small rivers of a adaption many-side and throwing in a lot of financial resources. Because the improvement planning of small river was designed all small river in a county, the priority must be preprocessed. Now, the counties prioritized for improvement planning of small river are a few, and acquisition and manipulation of the data are time-consuming. Geo-Spatial Information System (GSIS) is specifically designed to manage and analyze spatial data. It will be to offer the benefit to the determination of the improvement priority in a small river. The purpose of this study is to offer priority for improvement planning of small river using GSIS. For this purpose, it was developed using Arc/Info software and AML was used as a developing tool.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3307-3311
• /
• 2013

A new fiber optical sensor was developed for the determination of 2,4-dichlorophenol (DCP). The sensor was based on DCP oxidation by oxygen with the catalysis of iron(III) tetrasulfophthalocyanine (Fe(III)PcTs). The optical oxygen sensing film with $Ru(bpy)_3Cl_2$ as the fluorescence indicator was used to determine the consumption of oxygen in solution. A lock-in amplifier was used for detecting the lifetime of the oxygen sensing film by measuring the phase delay change of the sensor head. The different variables affecting the sensor performance were evaluated and optimized. Under the optimal conditions (i.e. pH 6.0, $25^{\circ}C$, Fe(III)PcTs concentration of 0.62 mg/mL), the linear detection range and response time of the sensor are $1.0{\times}10^{-6}-9.0{\times}10^{-6}$ mol/L and 250 s, respectively. The sensor displays high selectivity, good repeatability and stability, and can be used as an effective tool in analyzing DCP concentration in practical samples.

• The Korean Journal of Physiology and Pharmacology
• /
• v.10 no.6
• /
• pp.349-354
• /
• 2006

The aromatic hydrocarbon receptor (AhR) is a ligand-activated transcription factor that mediates many of the biological and toxicological effects of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD, dioxin) and related chemicals. The application of recombinant reporter plasmid such as the firefly luciferase gene has proven to be a very effective method to detect these chemicals. The bioassay system, CALUX, is sensitive in directly detecting AhR-agonists from a variety of environmental and biologic materials. However, responses of the AhR-dependent bioassays are dependent on the cell types used. Thus, we developed a sensitive bioassay using the recombinant mouse hepatoma cell (Hepa1c1c7) for the determination of dioxins. The recombinant cell line was stably transfected with firefly luciferase reporter gene (pGudLuc1.1). The transfected cells showed the highest induction of luciferase activity at 4.5 hr and a decrease beyond this time point. The system showed the highest sensitivity of detection ever reported. Upon TCDD exposure cells showed 2 fold increase at 10 pM and 7 fold increase at 100 pM, respectively. The passage number after the transfection played an important role in the sensitivity. The increase of passage number tended to increase the sensitivity of the cells up to 15. The media without phenol red showed a higher induction rate than with phenol red, suggesting the preferable use of phenol red-free media for the bioassay. Since each of the assays has unique characteristics that make them suitable for some screening applications and not others, development of sensitive bioanalytical methods based on a variety of cellular systems in a key to the successful determination of dioxins. The bioassay system developed in this study will contribute to further development of successful screening the AhR agonists among the environmental mixture. In addition, the rapid and sensitive nature of this cellular system can be applied as a valuable tool to screen the dioxin-like moieties among the prodrugs at the initial stage, thereby expediting the new drug discovery.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.115-123
• /
• 2008

The dispersive phase velocity of a wave propagating through multilayered systems such as a soil site is an important parameter and carries valuable information in non-destructive site characterization tests. The dispersive phase velocity of a wave can be determined using the phase spectrum, which is easily evaluated through the cross power spectrum. However, the phase spectrum determined using the cross power spectrum is easily distorted by background noise which always exists in the field. This causes distortion of measured signal and difficulties in the determination of the dispersive phase velocities. In this paper, a new method to evaluate the phase spectrum using the harmonic wavelet transform is proposed and the phase spectrum by the proposed method is applied to the determination of dispersion curve. The proposed method can successfully remove background noise effects. To evaluate the validity of the proposed method, numerical simulations of multi-layered systems were performed. Phase spectrums and dispersion curves determined by the proposed method were found to be in good agreement with the actual phase spectrums and dispersion curves biased by heavy background noise. The comparison manifests the proposed method to be a very useful tool to overcome noise effects.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.579-586
• /
• 2015

Sport talent development center have been operating in order to support sports gifted children of the training in the early finding and selecting potential elementary school students for sports. For this purpose, elementary students in grades 2~6 are selected through basal fitness and physique test. However qualitative assessment of the student was not in progress, but depending on current physique and fitness totally sports talented children were selected. Therefore this study was to develop a tool to determine giftedness based on the observation method to assess the athletic potential of gifted children based on Yoon's competition intelligence(2011). For this purpose of study, sub-factors were extracted through expert consultations. Based on the extracted sub-factors, such as training intelligence, learning ability practical intelligence were extracted for practical intelligence, and finally 16 evaluation questions were proposed to evaluate sports talented children. Proposed questions will be helpful for quality evaluation of sports gifted children, as well as using as a method for discovering sports gifted children.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1125-1125
• /
• 2001

Micro-scale test methods are producing small-sample size where the conventional physical and chemical tests can not be used (high standard deviation, uncertain sampling conditions, low repeatability). Different small-scale test methods were developed recently for determination of physico-chemical, functional, rheological properties of wheat or wheat dough using miniaturized instruments with sophisticated sample preparation/handling and mechanics (RVA, 2 g mixograph, micro-Z-arm mixer, small-scale noodle maker, micro-baking method etc.). The small-scale methodologies can be used as basic research tools or as technology supported measurements and can be also essential in the early selection for quality traits in breeding programs. The milling as a sample preparation step is essential procedure providing good quality flour or semolina samples from small amount of grain (5-10 g) in a reproducible and reliable way. The aim of present study was to use NIR as quality control tool, and to evaluate the recently developed and manufactured micro-scale lab mill (FQC-2000) produced by Inter-Labor Co. Ltd., Hungary. The milling characteristics of the new instrument were compared to other laboratory mills and the effects of milling action on the chemical composition of fractions were analysed. The fractions were tested with both chemical and near infrared spectroscopic methods. The micro-scale milling resulted significantly different yields, particle size distributions and different fractions from compositional point of view. The near infrared spectra were sensitive enough to distinguish the fractions obtained by different milling procedures. Quantitative NIR calibration equations were developed and tested in order to measure the chemical composition of characteristic milling fractions. Special qualification procedure the PQS (Polar Qualification System) method was used for detecting the differences between fractions obtained by macro and micro-milling procedures. The results and the limitations of PQS method in this application will be discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.455-460
• /
• 2010

This study was carried out to find out any inherent problems occurring in the sampling and analytical procedures, and to suggest the relevant solutions to the problems. In addition, an optimal condition of clean-up process was developed, which was based on a method using silica glass column. As a result of experiments to test any artificial contamination of blank samples such as glassware and collection media, artifacts of DBP and DEHP appeared to be detected in various kinds of laboratory tools and apparatuses used in the sampling and analytical works. Therefore, it is necessary to investigate a degree of contamination before laboratory works by conducting a prior check any possible contaminations in all experimental tools and apparatus. It is also necessary to devise a method to avoid a tool, if possible, or to use a substitute of phthalate free. If the use of any plastic tool to cause contamination is inevitable, it should be properly corrected with a blank level, as is equally treated as the sample. The clean-up process demonstrated in this study can give us a significant benefit in terms of the quantity and quality of a target compound by GC/MS analysis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.46-51
• /
• 2012

Injection pressure, an important factor in filling process, should be minimized to enhance injection molding quality. Injection pressure can be controlled by valve gate open timing. In this work, we decided the valve gate open timing to minimize the injection pressure. To solve this design problem, we integrated MAPS-3D (Mold Analysis and Plastic Solution-3Dimension), a commercial injection molding CAE tool, to PIAnO (Process Integration, Automation and Optimization), a commercial PIDO (Process Integration, and Design Optimization) tool using the file parsing method. In order to reduce computational cost, we performed an approximate optimization using meta-models that replaced expensive computer simulations. At first, we carried out DOE (Design of Experiments) using OLHD (Optimal Latin Hypercube Design) available in PIAnO. Then, we built Kriging models using the simulation results at the sampling points. Finally, we used micro GA (Genetic Algorithm) available in PIAnO. Using the proposed design approach, the injection pressure has been reduced by 13.7% compared to the initial one. This design result clearly shows the validity of the proposed design approach.