• 한국환경복원기술학회지
• /
• 제7권1호
• /
• pp.97-109
• /
• 2004

The disposal of stormwater is one of the major problems in urban water management. One method of reducing peak runoff rates and other detrimental impacts of stormwater is detention storage. Detention ponds as a water quality control alternatives have been investigated by a number of researchers. Recognizing multiple roles such as flood peak attenuation, pollution removal and aesthetic enhancement, the design and management of detentions ponds deserve more research. The purpose of this research is to establish design criteria wet detention ponds to improve water quality. Water quality in detention pond discharge might be improve with physical, chemical and biological alterations. Physical alteration was focused in this study. There are several methods for estimating the suspended solid control capability of wet detention ponds. Existing models of suspended solids removal are based on sedimentation and gravity settling theory. The pollutant trap efficiency of pond is a function of several interrelating factors. Detention time is the most important factor, because it determine gravity settling quantities of pollutants. Desirable modification of physical factors for improvement of water quality in wet detention ponds are volume ratio, area ratio, length to width ratio, depth, out let location, bottom soil type. In order to apply design procedure in actual site, Namak new town development area was selected.

• 한국수자원학회논문집
• /
• 제33권3호
• /
• pp.351-364
• /
• 2000

본 연구에서는 저류지에 의한 우수의 수질개선 효과를 모형실험에 의하여 분석하였다. 본 연구를 통하여 배수구역 출구에 저류지를 설치함으로써 합류식 관거를 통한 하수 및 강우 초기 유출수의 첨두유량과 오염도를 크게 경감시킬 수 있음을 확인하였다. 저류조 모형실험은 자연침강 저류조와 자갈접촉 저류조에 대하여 각각 실시하였다. 자연침강 저류조실험에서는 지속적으로 우수한 방류하는 경우보다는 일정시간 저류지내에 정체 후 방류하는 경우가 동일한 지체시간의 조건하에서 더 높은 오염물질 제거율을 보였다. 또한, 자갈을 채운 저류조에 대한 실험을 실시하였으며, 자연침강 저류조에 비해 전반적으로 각 오염성분에 대해 높은 제거율을 보였다. 한편, 채움재료의 표면이 상대적으로 거친 쇄석의 경우가 자갈보다 높은 제거율을 보였다.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.121-128
• /
• 2009

Objectives of this study were to investigate influencing factors of detention time, particle size distribution, and filter medium characteristics for waterworks sludge dewatering. The stepped pressure filtration was carried out with lab scale apparatus and the filter press pilot test for dewatering was conducted at the water treatment plant. Effects of filter medium and polymer dose were examined through observing water content and dewatering velocity and cyclic dewatering rate with filter press pilot test. Relationships among detention time, particle size distribution and filtration resistance were analyzed. Prolongation of sludge detention time was found to cause blinding phenomenon in cake and filter medium and to decrease dewatering process efficiency. The average specific resistance increased according to detention time. In pilot test of dewatering for thickened sludge with Nylon Multi-NY840D and Nylon Mono-100% filter media, dewatering velocities were 0.92 and $0.93kg\;DS/m^2{\cdot}hr$ according to 0.1% polymer dose of dried solids weight base. And cyclic dewatering rates were 2.45 and $2.50kg\;DS/m^2{\cdot}cycle$ cycle for the Nylon Multi-NY840D and Nylon Mono-100% media. Dewatering velocity of polymer dosed sludge was observed to be higher than that of non-polymer sludge.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.619-624
• /
• 2005

This work is for examining a simplified equation based on the rational formula, which can easily decide storm-water detention volume in small urban catchments. The storm-water detention volume is determined by the inflow hydrograph flowing to detention basin and the outflow hydrograph discharged from the detention basin. The ratio of average outflow over the period of rainfall duration against allowable discharge was 0.5 in former simplified equation. But this research has found that the average outflow ratio depends on the storage methodology. In the case of the on-line storage method, the average outflow ratio is a function of the time of concentration of the catchments and rainfall duration, which ranged from 0.5~1.0. In the case of the off-line storage method, the average ratio is a function of peak discharge and allowable discharge except above time of concentration and rainfall duration, where its function value ranged from 1.0~2.0. When applying this equation to small catchment in Mokpo city, South Korea, we could easily calculate the relation curve between the storm-water detention volume and allowable discharge.

• 상하수도학회지
• /
• 제21권6호
• /
• pp.709-715
• /
• 2007

The dewaterability of a sludge can be characterized by two ways: the residual moisture content in the sludge cake after dewatering process, and the filtration of the sludge. Time to filter (TTF) represents filtration processes that are special cases of the flow through a solid matrix concept. TTF characterizes a resistance to filtration. The sludge resistance, in turn, can be subdivided into resistances associated with the solid phase and the liquid phase to evaluate the effect of each of the two phases on sludge dewaterability. In order to determine the dewatering characteristics of the water sludge samples, TTF and zeta potential were measured. For these studies cationic polymer was chosen for water sludge dewatering experiments. The zeta potential of thickener sludges neared from minus values to zero values till 4 days after sampling. The dewaterability of thickener sludges using cationic polymer was deteriorated according to the increase of detention time. As the detention time was increased from 4 to 10 days, the optimal dose of the polymer was increased from 4 to 8mg/L. Therefore, the optimal detention time plays an important part for the dewaterability of a sludge.

• 한국물환경학회지
• /
• 제28권5호
• /
• pp.686-692
• /
• 2012

This study illustrates how to design and evaluate a non-point sources management detention pond using SWMM. In particular, special attention is given to the orifice design. In SWMM, orifice properties that need to be defined include its height above the bottom of the storage unit, its type, its geometry and its hydraulic properties. Among the various characteristics of orifice, the orifice hole size which is closely related to hydraulic retention time is focused in this study. Sensitivity analysis of orifice size in annual non-point sources reduction efficiency is carried out. In addition, a methodology which can be used to design a virtual junction in SWMM has been proposed to quantify water quality improvement triggered by the detention pond installation. As a result, it is recommended that a detention outlet should be designed to be about 2 to 3 days of hydraulic retention time.

• 물과 미래
• /
• 제28권6호
• /
• pp.203-215
• /
• 1995

본 연구는 도시유역에서 내수에 의한 침수를 경감시키기 위하여 유수지 및 빗물펌프장을 운영함에 있어 배수펌프를 효율적으로 조작할 수 있는 모형을 개발, 제시하였다. 유출량을 산정하기 위하여 설계강우의 재현기간을 10, 20, 30년으로 선정하였으며, 유수지로 유입되는 유출수문곡선은 SWMM모형을 이용하여 구하였고, 펌프의 동작확인을 위하여 페트리네트도 (Petri net diagrams)를 사용하였다. 또한 종합평가지표를 이용하여 펌프의 안정성과 효율성을 평가하였으며, 서울 시내 3개의 유수지에 모형을 적용하여 모형의 적용성을 확인하였다. 설계강우와 실적강우에 대한 수치실험 결과 본 연구에서 제시한 모형 중 모형 3은 기존의 배수펌프 조작모형보다 내수방재 측면에서 우수하였으며, 실시간 펌프운영조작에도 효과적으로 사용될 수 있다고 판단된다.

• 수산해양교육연구
• /
• 제28권1호
• /
• pp.34-46
• /
• 2016

This study analyzes inspection results of ships by Port State Control. Particularly, this research focuses on a detention trend of vessels that registered to Korean Register of Shipping. In order to conduct this research, we have searched 170 ships that got a detention with a Code-30 within recent 46 months period. The deficiencies of the detentions are inspected by ship types, ship years, flags, ports inspected, and criteria. Moreover, we categorized the deficiencies for the detentions into 17 types for internal and external inspections. As the results of the comparison study, bulk and general cargo carriers dominate the portion of detentions by almost 66 percent. Self-induced detention due to a lack of preparation by crews and company support are the main reasons of repeated detentions from the same type ships. Ships between six and ten years old show the lowest detention rate by 4 percent whereas ships less than five years old generate the highest detention rate by 22 percent. The main categories of the detentions from ships less than 5 years old are a lack of documentation and certification, and the clues support our opinion that owners and crews may neglect to prepare the inspections because their strong confidence for the ship condition due to young ship age. As a result of a great effort of Korean government and shipping companies to reduce a detention rate, the detention rate has been recently reduced to 0.3 percent. The results also require companies with the flag of convenience ships to spend more effort to reduce the detention rate, too. We expect that using social networking service by Korea Register will lower the detention rate by sharing relevant information real-time to ships and owners.

• 한국방재학회 논문집
• /
• 제8권3호
• /
• pp.105-115
• /
• 2008

도시화로 인한 유출량의 증가 및 도달시간의 단축은 도시재해의 한 원인이 되고 있다. 이를 막기 위하여 도시 배수유역내에 저류지를 설치하여 첨두도달시간을 지연시키고 방류량은 하수관거의 통수능 이하로 조절하는 방안을 활용하고 있다. 저류지를 설계 운영함에 있어서 사용되는 수문모형은 일반적으로 계획모형, 설계모형 및 운영모형으로 분류되고 있다. 본 연구에서는 재해영향평가서 22개소의 기 설계된 저류지를 분석대상으로 하여 여러 가지 저류지 계획모형의 적합성을 검토하였다. 저류지 계획모형으로는 삼각형, 사다리꼴 설계수문곡선과 경험적 공식을 이용한 11가지의 모형을 적용하였다. 저류지 계획모형의 분석에서 on-line 저류지의 경우는 사다리꼴 형태 설계수문곡선을 채택하고 있는 이종태 등 모형(1991)의 결과가 대상 저류지의 실저류량과 가장 유사함을 보였고, off-line 저류지의 경우는 삼각형 형태 설계수문곡선을 채택하고 있는 Abt and Grigg 모형(1978)의 결과가 비교적 양호한 결과를 보이는 것으로 나타났다.

• 지구물리
• /
• 제7권2호
• /
• pp.151-155
• /
• 2004

도시 수해 문제를 해결하기 위해서는 충분한 펌핑 시스템과 하천 유하능력을 확보하여야 하나 하천의 유하 능력을 넘어서는 유출이 발생하는 경우 각 소유역 별로 이들 유량을 일시적으로 저류 할 수 있는 유수체계의 설치가 필요할 것이다 그러나 이러한 유수체계의 설치에도 불구하고 강우 분포의 변화 및 유량의 이동 지체에 따라 오히려 첨두 유량이 증가하는 문제를 발생시킬 수도 있으므로 상류와 하류에 위치한 각 유수지의 저류량과 유출 펌핑량 간의 시간문제 등 상호 관련성을 고려한 유수체계의 설치 모형이 필요하므로 IDP(Incremental Dynamic Programming) 기법을 적용하여 강우 분포에 따른 유수지 상호간의 영향을 고려한 설계 모형을 제시하였다