• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.27-33
• /
• 2010

Cognitive radio (CR), which is proposed as a technology that utilizes the frequency resources effectively, has been studied to relive scarcity of the frequency resources. Also, FCC revises the regulation to reuse the TV white spaces for applying CR system and allows to use the TV white spaces by CR devices and use of CR device may be regularized after conversion by DTV in 2009. In order to reuse the TV bands without harmful interference to primary user, correct spectrum sensing should be needed to detect DTV signals that is the primary user in TV bands. In this paper, we detect the DTV signal using FFT-based pilot sensing and cooperative sensing scheme is applied for the reliability of the sensing performance and the accuracy of the detection probability. Also, in order to make the reliable decision, the majority rule is proposed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.10 s.340
• /
• pp.39-50
• /
• 2005

In this paper, we propose a performance improving MAC algerian for the IEEE 802.11 DCF. WLAN based IEEE 802.11 uses two control methods called 'Distributed Coordination Function(UF)' and 'Point Coordination Function(PCF)'. The nF controls the Urnsmission based on carrier sense multiple access with collision detection(CSMA/CA), that decides a random backoff time with the range of contention window for each terminal. Normally, each terminal the CW double after collision, and reduces the CW to the minimum after successful transmission. This paper proposes an enhanced DCF algorithm that decreases the CW smoothly after successful transmission in order to reduce the collision Probability by utilizing the current status information of WLAN. We also analyze the throughput and delay performance for the unsaturated case mathematically. Simulation results show that our algorithm enhances the saturation throughput of WLAN. They also coincide well with the analytical results.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.104-111
• /
• 2012

In this paper, we propose a novel method to improve the performance of the improved minima controlled recursive averaging (IMCRA). From an examination for various noise environment, it is shown that the IMCRA has a fundamental drawback for the noise power estimate at the offset region of continuity speech signals. Espectially, it is difficult to obtain the robust estimates of the noise power in non-stationary noisy environments that is rapidly changed the spectral characteristics such as babble noise. To overcome the drawback, we apply the global speech absence probability (GSAP) conditioned on both a priori SNR and a posteriori SNR to the speech detection algorithm of IMCRA. With the performance criteria of the ITU-T P.862 perceptual evaluation of speech quality (PESQ) and a composite measure test, we show that the proposed algorithm yields better results compared to the conventional IMCRA-based scheme under various noise environments. In particular, in the case of babble 5 dB, the proposed method produced a remarkable improvement compared to the IMCRA ( PESQ = 0.026, composite measure = 0.029 ).

• The Journal of Society for e-Business Studies
• /
• v.15 no.4
• /
• pp.303-317
• /
• 2010

In this paper, we propose a novel approach to fault prediction for real-time business process monitoring method using extended KNN imputation based LOF prediction. Existing rule-based approaches to process monitoring has some limitations like late alarm for fault occurrence or no indicators about real-time progress, since there exist unobserved attributes according to the monitoring phase during process executions. To improve these limitations, we propose an algorithm for LOF prediction by adopting the imputation method to assume unobserved attributes. LOF of ongoing instance is calculated by assuming next probable progresses after the monitoring phase, which is conducted during entire monitoring phases so that we can predict the abnormal termination of the ongoing instance. By visualizing the real-time progress in terms of the probability on abnormal termination, we can provide more proactive operations to opportunities or risks during the real-time monitoring.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.96-104
• /
• 2017

A one-shot system (device) refers to a system that is stored for a long period of time and is then disposed of after a single mission because it is accompanied by a chemical reaction or physical destruction when it operates, such as shells, munitions in a defense weapon system and automobile airbags. Because these systems are primarily related with safety and life, it is required to maintain a high level of storage reliability. Storage reliability is the probability that the system will operate at a particular point in time after storage. Since the stored one-shot system can be confirmed only through inspection, periodic inspection and maintenance should be performed to maintain a high level of storage reliability. Since the one-shot system is characterized by a large loss in the event of a failure, it is necessary to determine an appropriate inspection period to maintain the storage reliability above the reliability goal. In this study, we propose an optimal inspection policy that minimizes the total cost while exceeding the reliability goal that the storage reliability is set in advance for the one-shot system in which periodic inspections are performed. We assume that the failure time is the Weibull distribution. And the cost model is presented considering the existing storage reliability model by Martinez and Kim et al. The cost components to be included in the cost model are the cost of inspection $c_1$, the cost of loss per unit time between failure and detection $c_2$, the cost of minimum repair of the detected breakdown of units $c_3$, and the overhaul cost $c_4$ of $R_s{\leq}R_g$. And in this paper, we will determine the optimal inspection policy to find the inspection period and number of tests that minimize the expected cost per unit time from the finite lifetime to the overhaul. Compare them through numerical examples.

• Tuberculosis and Respiratory Diseases
• /
• v.83 no.3
• /
• pp.211-217
• /
• 2020

The gold standard method for diagnosis of tuberculosis is the isolation of Mycobacterium tuberculosis through culture, but there is a probability of cross-contamination in simultaneous cultures of samples causing false-positives. This can result in delayed treatment of the underlying disease and drug side effects. In this paper, we reviewed studies on false-positive cultures of M. tuberculosis. Rate of occurrence, effective factors, and extent of false-positives were analyzed. Ways to identify and reduce the false-positives and management of them are critical for all laboratories. In most cases, false-positive is occurring in cases with only one positive culture but negative direct smear. The three most crucial factors in this regard are inappropriate technician function, contamination of reagents, and aerosol production. Thus, to reduce false-positives, good laboratory practice, as well as use of whole-genome sequencing or genotyping of all positive culture samples with a robust, extra pure method and rapid response, are essential for minimizing the rate of false-positives. Indeed, molecular approaches and epidemiological surveillance can provide a valuable tool besides culture to identify possible false positives.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.1
• /
• pp.29-37
• /
• 2020

Work to improve network throughput has been focused on network coding as the utilization of IoT-based application services increases and network usage increases rapidly. In network coding, nodes transform packets received from neighboring nodes into a combination of encoded packets for transmission and decoding at the destination. This scheme is based on trust among nodes, but in the IoT environment where nodes are free to join, a malicious node can fabricate the packet if it legally participates in the configuration. It is difficult to identify the authenticity of the encoded packet since the packet received at destination is not a single source but a combination of packets generated by several nodes. In this paper, we propose a method to detect "look-like-valid" packets that have been attacked and disguised in packets received at destination, and to identify valid messages in the reconstructions. This method shows that network coding performance is significantly improved because the destination can reconstruct a valid message with only received packets without retransmission with a high probability, despite the presence of disguised packets.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1033-1036
• /
• 2013

A study about collision resolution is needed because huge file, video and multimedia information are transmitted to wireless LAN. CSMA/CR protocol guarantees fairness, but doesn't consider QoS. To practicalize CSMA/CR protocol in saturation fully-connected single hop network environments, this paper proposes method of collision compensation. previous CSMA/CR protocol chooses CR Slot only considering fairness, but this paper chooses front CR Slot for compensation of collision to station experiencing collisions. The station transmits jam signal and has channel priority of transmission. So transmitting efficiency and successful transmission probability rise. This proposed simple method can offer benefit to station experiencing collisions without additional hardware cost.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.58-61
• /
• 2018

In Korea, current medical technology is the highest level in the world. As a result, many doctors have specialized knowledge of various disorders or diseases, and are proceeding in a better way. With such high medical technology, it is possible to increase the probability of success of surgery to provide high reliability to patients. Rehabilitation is also a form of medical treatment that reduces the side effects that occur after surgery that is done for quick cure. However, the situation in this section is slightly different. There are moves to develop rehabilitation devices and operations, but most of them are now dependent on foreign technology. Rehabilitation therapy, which we commonly know, is dominated by behavior. However, it is also a kind of rehabilitation to find out how much the patient's symptoms are improved or recovered. In this paper, we have studied the development of a program by using the Deeplearning method in order to detect the problem of the food swallowing operation by the severity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1181-1185
• /
• 2005

A combining of MIMO signal processing with OFDM is regarded as a promising solution of enhancing the performance of next generation wireless system. Therefore, in this paper, an OFDM-based wireless system employing layered space-time architecture is considered for a high-rate transmission. In the MIMO-OFDM system, we evaluate the PAR performance using the SLM approaches. The investigated SLM scheme for MIMO-OFDM signals selects the transmitted sequence with lowest average PAR over all transmitting antennas and retrieves the side information very accurately at the expense of a slight degradation of the PAR performance. The low probability of false side information can improve the overall detection performance of the MIMO-OFDM system with erroneous side information compared to the ordinary SLM approache, respectively. Also, we provide closed form of the average BER performance in MIMO-OFDM system using analytic approach.