• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.344-347
• /
• 2006

Noise reduction and control is an important problem in the performance of underwater acoustic system and on the habitability of the passenger ship for crew and passenger. Furthermore, sound generated by a propeller is critical in underwater detection and is often related to the survivability of the vessel especially for military purpose. Generally propeller noise is often the dominant noise source of marine vehicle. The flow field is analyzed with potential-based panel method, and then the time dependent pressure and sheet cavity volume data are used as the input for Ffowcs Williams-Hawkings formulation to predict the far-field acoustics. Through this study, the dominant noise source of underwater propeller is analyzed, which will provide a basis for proper noise control strategies.

• 한국산업융합학회 논문집
• /
• 제7권1호
• /
• pp.69-82
• /
• 2004

Recently, in the food, paper, steel and plastic industries, plate or sheet type products have been produced by the rolling drum. Steam heating drums are introduced into plastic products facilities in order to keep the density, microstructure, and strength of material uniformly. The drum journal can not help being concentrated by stresses due to the bending and torsion. Especially the drum, heated by high pressure steam, might be exposed in the steam leakage accident. First of all, the stresses on the steam drum journal are to be analyzed, and a case study proper to the subject was performed with a scraped journal, in order to investigate the failure characteristics as well as the initiation and propagation of fatigue cracks, and most probable circumstances of crack initiation. As the result of this study, it is suggested that newly installed drum journal be thoroughly inspected at the next periodic maintenance intervals for evidence of cracking, the microstructure examination and hardness measurements to prevent steam drum from the failure accident.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2252-2254
• /
• 2002

The Reactor internal structures which consist of many complex components are subjected to flow-induced vibration due to high temperature and pressure in Reactor coolant system. The above flow-induced vibration causes degradation of structural integrity of the Reactor and may result in loosing mechanical binding component which might impact other equipment and component or cause flow blockage. It is important to analyze reactor noise signal for the early detection of potential problem or failure in order to diagnosis reactor integrity in the point of view of safety and plant economics. Detailed composition of diagnostic system reactor internal structures using neutron noise(RIDS).

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.41-44
• /
• 2004

Measurements of streaming potential can provide a means for the detection and quantification of contaminants in groundwater prior to remediation. However, laboratory determinations of specific electrolyte properties are required for an adequate analysis of the hydraulic gradient in complex situations. Data obtained for the King River in Tasmania confirm a linear relationship linking streaming potential data and hydraulic gradients. Laboratory samples at low concentration (0.001M KCl) indicate values in the range 20-80 mV/cm of water pressure, while for higher concentrations (0.01M KCl) values are less than 25 mV/cm. Similar ion concentrations are observed in the King River, consistent with field correlations indicating values for streaming potential close to 15 mV/cm. In-situ fluid samples are required for more detailed analysis of local anomalies that may be associated with variations in recharge and migration of contaminants.

• 한국음향학회지
• /
• 제2권1호
• /
• pp.11-19
• /
• 1983

An irregulary formed chamber was designed and constructed to recognize the direct sound radiated from the sound source and the reflected sound from the walls of the chamber. The sound signal used was tone burst in the frequency response characteristics with the signal detection after transient effect. The direct wave, transient phenomena and the primary reflected sound could be asiily distinguished each other by measurements of the arrival time of the time difference. And also noise could be easily distinguished by the same method. The result obtained can be used in industries for automatic measurement of the sound pressure reponse characteristics with respect to frequencies.

• 소성∙가공
• /
• 제11권7호
• /
• pp.620-627
• /
• 2002

The purpose of this paper is the development of an automated measurement system for micro spring based on the digital image processing technique. This micro spring can be used in various engineering applications such as filament, load bearing springs, hard disk suspension and many others. Main functionality of the micro spring inspection system is to measure the representative pitch of the micro spring. The derivative operators are used for edge detection in gray level image. Measurement system developed in this paper consisted of new auto feeding mechanism to take advantage of air pressure. In the process of development of the micro spring inspection system based on the image processing and analysis, strong background technology and know-how have been accumulated to measure micro mechanical parts.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.185-187
• /
• 2005

The reactor pressure vessel head of PWR has penetrations for control rod drive mechanism and instrumentation systems. The Primary coolant water and operating temperature can cause the stress-corrosion cracking of these nickel-based alloy penetrations. It is difficult to detect and size flaws such as SCC in the reactor head penetrations using conventional W methods because of complex geometry, Therefore, the utilities are using the TOFD technique for the detection and sizing of the flaw. This study shows the correlation between the ultrasonic wave direction and the orientation of the flaw and the range of flaw depth which can be detected by the TOFD techniques.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2010년도 춘계학술대회
• /
• pp.469-474
• /
• 2010

본 연구에서는 보건기관이 효율적으로 고혈압 관리 대상자를 탐색하고, 고혈압 관련 요인에 대한 지식을 효과적으로 관리할 수 있도록 하는 고혈압 고위험군 추정 모형 및 우선 사업 대상자 탐색 모형을 제안한다. 특히, 대용량 데이터 처리 및 실시간 시스템 운영, 외부 환경 변화를 고려한 자동 학습과 같은 현실적인 제약 조건을 해결하는 모형을 개발하는 것을 주 목표로 한다. 지역 보건소에서 수집된 의료 데이터를 이용하여 최적의 파라미터 값을 설정한 고혈압 고위험군 탐색 모형을 도출하였으며, 모형의 검증을 위하여 고혈압 환자정보로 구성된 평가용 데이터를 사용하여 고혈압 자연 발병률 대비 약 2배 수준으로 향상된 고혈압 환자 예측 정확도가 얻어지는 것을 확인하였다. 시스템 운영과 유비보수 측면에서 현실적으로 중요한 문제인 대용량 데이터 처리 및 외부 환경 변화에 강인한 자동학습 이슈를 해결하기 위한 방안에 대해서도 설명하였다.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.87-100
• /
• 2005

This paper studies on the quality problem for the Reley using the 6 sigma process. The application of 6 sigma process suggested reliable and valuable statistical data for the quality of the Relay at the production line. In the measurement step in 6 sigma process, the FMEA(filure mode effect analysis) were used for the detection of problem source. The application of 6 sigma process gave the improving method for the quality of the Relay. Consequently the 6 sigma process was proved very effective for the quality problem reducing at the production line.

• 대한화학회지
• /
• 제16권6호
• /
• pp.373-377
• /
• 1972

미량 구리의 sodium diethyl dithiocarbamate의 chelate를 ethyl acetate로 추출하고 이 추출액을 구리(원자번호 29번)의 이웃원소인 아연(원자번호 30번) 분말에 흡착시켰다. 추출액을 날려보낸 뒤에 $250kg/cm^2$ 으로 압축성형하여 구리의 $K_{\alpha}2(2{\theta}_{LiF} = 45.08^{\circ})$에서 형광 X-선을 측정한 결과 구리 $10{\mu}g$까지 측정할 수 있었으며 표준물질첨가법에 의하여 상대오차를 ${\pm}10$%이내로 낮출수가 있었다.