• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.1
• /
• pp.8-13
• /
• 2001

LMS algorithm has been used for plant identifier and noise cancellation. This algorithm has been researched for performance enhancement of filtering. The design and development of a reliable system has been becoming a key issue in industry field because the reliability of a system is considered as an important factor to perform the system's function successfully. And the computing with reliability and fault tolerance is a important factor in the case of aviation, system communication, and nuclear plant. This paper presents design of reliable adaptive filter with fault tolerance. Generally, redundancy is used for reliability. In this case it needs computing or circuit for voting mechanism, or fault detection. Therefore it has simple computing, and practicality for application. And in this paper, reliability of adaptive filter is analyzed. The effectiveness of the proposed adaptive filter is demonstrated to the case studies of plant identifier and noise cancellation by using DSP.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3117-3119
• /
• 1999

In this paper, a new phase detector which can detect phase difference of variable input frequency and represent as a DC voltage is designed. The proposed phase detector has detection range from $-180^{\circ}$ to $180^{\circ}$. It is implemented by digital electronic circuit. It operates from 125 kHz to 4 MHz frequency of input signal and it's maximum phase error is $360/256^{\circ}$.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.589-593
• /
• 2001

This paper presents a high frequency modulation electronic ballast for the metal halide lamp. As the proposed ballast operates in high frequency ranges (20kHz - 100kHz) and it can start up the lamp using the LC resonant circuit without external igniter, the proposed ballast is very compact. The proposed ballast is controlled with the modulated frequency in the range of 20kHz to 100kHz, and it has variable modulating frequencies between 200Hz and 2kHz in order to avoid the acoustic resonance phenomenon. In this paper, a new realtime acoustic resonance detection method is described and the experimental results with the proto-type ballast of 150W metal halide lamp with the dimming function are discussed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.500-503
• /
• 2006

This paper gives a Wireless lightning detecting and warning system. This system composed of transmitter and receiver. It promptly senses lightning strikes on the power lines and transmission towers by using the lightning current detection circuit in a small transmitter situated on the top of power tower, and it sends the number of lightning strikes and the ID. of the tower to patrols through the receivers. This system will be used to discover the exact location of a lightning strike.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2129-2139
• /
• 2009

In this paper, we diagnose the fault in the CA analyzer by setting up the initial value such that the final test signature is a constant regardless of the circuit being tested. This method makes the CA test procedure short and clear. In addition, we detect the fault of the faulty input sequence by using the inverse matrix of the CA state transition matrix.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.702-708
• /
• 2010

In this paper, a fault diagnosis algorithm for brushless DC (BLDC) motor drives is proposed to maintain control performance under switch open-damage. The proposed fault diagnosis algorithm consists of a simple algorithm using measured phase current information and it detects open-circuit faults based on the operating characteristic of BLDC motors. The proposed algorithm quickly recovers control performance due to its short detection time and its reconfiguration of the system topology. It can be embedded into existing BLDC drive software as a subroutine without additional sensors. The feasibility of the proposed fault diagnosis algorithm is proven by simulation and experimental results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.796-800
• /
• 2011

As the increasing integrity of VLSI, the BIST(Built-In Self Test) is used as an effective method to test chips. Generally the pseudo-random test pattern generation is used for BIST. But it requires too many test patterns when there exist random resistant faults. Therefore we propose a mixed test scheme which applies to the circuit under test, a deterministic test sequence followed by a pseudo-random one. This scheme allows the maximum fault coverage detection to be achieved, furthermore the silicon area overhead of the mixed hardware generator can be reduced.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1556-1558
• /
• 2005

As a result of the advancement of radio communications technologies, some investigations are in progress to apply this technologies to a train control system. Most of these investigations are focused on the train safety distance control between a preceding train and a succeeding train, an interlocking system uses train circuits to control the railway path. To make the best use of advantages and improve the safety of radio communications based train control systems, the interlocking system must use radio communications technologies. And the safety level of this system must be equal to track circuit based interlocking systems. This paper describes the train location detection method, the system configuration and the system safety of the new system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.319-321
• /
• 2019

최근 여성 1인 가구를 대상으로 주거침입 관련 범죄가 꾸준히 발생하고 있다. 이러한 범죄를 예방하기 위한 한 방법으로는 특정 구역, 위치를 감시하기 위한 목적으로 CCTV(Closed-circuit television)를 설치하는 방법이 있다. 하지만 일반적인 가정용 CCTV의 경우 사용자 커스터마이징이 제한되어 있다. 따라서 본 논문에서는 저비용의 커스터마이징이 가능한 양방향 통신 기반 침입자탐지 시스템을 제안한다.

• International Journal of Contents
• /
• v.1 no.2
• /
• pp.35-38
• /
• 2005

This paper describes a design of simple and precision direction finder that can be adapted to shipboard or mobile vehicles used for Electronic support measure, ELINT and radio signal monitoring systems. The direction finding technology has improved with monolithic integrated circuit, linear array antennas, and interferometer. Interferometer uses the phase-comparison principle and has a good direction finding accuracy but it has an ambiguity problem. We suggest a simple ambiguity solver using phase-comparison technology with amplitude-comparison principle. The direction finding device that has been designed by the suggested method has 0.7 degree RMS error in azimuth angle and 0.6 degree RMS error in elevation angle in 0.5 - 2.0 GHz.