• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1615-1616
• /
• 2015

철도에서 열차를 검지하기 위해 기본적으로 궤도회로를 사용하지만 CBTC와 같이 지상의 신호설비의 감소 과정에서 기존의 궤도회로 대신 차축카운터와 같은 방법으로 열차 검지 방법이 변화하고 있다. 차축카운터는 불연속 열차검지 방식을 사용하며, 불연속 열차검지 시스템에서 사용하는 열차검지센서는 자기장의 변화를 이용한 비접촉식 열차 검지 센서를 사용한다. 하지만 센서의 위치가 정확하게 위치하지 못하면 열차검지에 문제가 발생하게 되어 중요한 열차 검지 기능에 이상이 발생한다. 따라서 센서의 설치위치 변화를 검지하고 이를 확인할 수 있는 회로에 대한 연구가 필요하다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.119-120
• /
• 2010

일반적으로 전선이 낡고 오래되거나 또는 강한 열이나 외부적 충격 등에 의해서 절연이 파괴된 경우 전기화재의 원인이 되는 아크 현상이 발생한다. 이러한 아크 사고는 Arc Fault Circuit Interrupter (AFCI)를 통해 예방할 수 있다. UL1699규정은 AFCI의 성능 시험을 위한 규정으로 구체적인 여러 성능 시험을 제시하고 있다. 그 중 EMI 필터 시험에 대한 부분을 한국의 전기 배선에 맞게 재구성하여 실험하고, 아크 검출에 EMI 필터가 어떤 영향을 미치는지 분석하여 UL에서 제시한 EMI 필터 시험의 타당성을 검증한다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.174-175
• /
• 2008

본 논문에서는 반도체 패키징 기술의 일종인 TCP, COF의 제품 결함을 영상 처리를 이용하여 검출하는 알고리즘을 제시하고, 신뢰성을 확보 후 실제 검사 공정에 적용하는 방법론을 제시한다. 제안된 방법으로는 TCP, COF의 양품 패턴을 기준 영상으로 취득하고, 제품의 생산 과정에서 라인 스캔 카메라를 이용한 실시간 제품 영상을 취득한 후, 그레이 레벨 영상으로 변환하고, 노이즈를 제거하기 위한 다양한 필터를 적용한다. 그리고 기준 영상과 비교하기 위한 이진화와 라벨링을 통해 제품의 불량을 검출하여, 사용자에게 시각적으로 표현해 주게 된다. 마지막으로 TCP, COF의 다양한 불량 항목 중에서 10여 가지의 불량패턴을 대상으로 제안된 방법의 타당성을 검증하였다.

• Journal of Sensor Science and Technology
• /
• v.16 no.5
• /
• pp.384-388
• /
• 2007

Air embolism can be a lethal complication of surgical procedures during which venous pressure at the site of surgery is sub-atmospheric or air is forced under pressure into a body cavity. To solve the problem, we developed the air detector using relative dielectric constant change, which is expected to be used broadly in industrial circles. We designed a detection circuit of sensing scheme. In experiments with a mock system, the proposed system showed a signal difference depending on the amount of air in the tygon tube of the mock system.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.103-108
• /
• 1999

The paper describes a implementation of space vector pulse-width modulation voltage source inverter and interfacing of DSP using field programmable gate array(FPGA) for a induction motor vector control system. The implemented chip is included logic circuits for SVPWM, dead time compensation and speed detection using Quick Logic, QLl6X24B. The maximum operating frequency and delay time can be set to 110MHz and 6 nsec. The designed Application Specific Integrated Circuit(ASIC) for SVPWM can be incorporated with a digital signal processing to provide a simple and effective solution for high performance induction motor drives with a voltage source inverter. Simulation and implementation results are shown to verify the usefulness of ASIC in a motor drive system and power electronics applications.

• Transactions of Materials Processing
• /
• v.19 no.5
• /
• pp.320-324
• /
• 2010

Multi-Layer Ceramic Circuit(MLCC) in the face of thousands of fine pitch multi hole is processed. However, the fine pitch multi hole has a size of only a few micrometers. Therefore, in order to curtail the measurement time and reduce error, the image processing measurement method is required. So, we proposed an image processing measurement algorithm which is required to accurately measure the fine pitch multi hole. The proposed algorithm gets image of the fine pitch multi hole, extracts object from the image by morphological process, and extracts the parameters of its position and feature by edge detecting process. In addition, we have used the sub-pixel algorithm to improve accuracy. As a result, the proposed algorithm shows 97% test-retest measurement reliability within 2 ${\mu}m$. We found that the algorithm was wellsuited for measuring the fine pitch multi hole.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.10
• /
• pp.103-112
• /
• 1998

The evolution of semiconductor manufacturing technology has accelerated the reduction of device dimensions and the increase of integrated circuit density. In order to improve yield within a short turn around time and maintain it at high level, a system that can rapidly determine problematic processing steps is needed. The statistical process control detects abnormal process variation of key parameters. Expert systems in SPC can serve as a valuable tool to automate the analysis and interpretation of control charts. A set of IF-THEN rules was used to formalize knowledge base of special causes. This research proposes a strategy to apply expert system to SPC in semiconductor manufacturing. In analysis, the expert system accomplishes the instability detection of process parameter, In diagnosis, an engineer is supported by process analyzer program. An example has been used to demonstrate the expert system and the process analyzer.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.178-182
• /
• 2013

We have developed a new non-conventional electron paramagnetic resonance (EPR) spectrometer, in which no resonant cavity was used. We previously demonstrated a wide frequency range operation of an EPR spectrometer using two loop antennas, one for a microwave transmission and the other for signal detection [1]. In contrast to Ref. [1], the utilization of a microstrip antenna as a transmitter enhanced a capability of wide-band operation. The replacement of conventional capacitors with varactor diodes makes resonance condition easily reproducible without any mechanical action during tuning and matching procedure since the capacitance of the diodes is controlled electronically. The operation of the new EPR spectrometer was tested by measuring a signal of 1,1-diphenil-2-picrylhydrazyl (DPPH) sample in the frequency range of 0.8-2.5 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.1
• /
• pp.11-21
• /
• 1989

In this paper, a GMSK modulator was implemented with a gaussian lowpass filter using digital signal processing, a phase integration, D/A convers and auxiliary circuits. The relatively narrow bandwidth of power spectrum of the GMSK modulator is observed when the cut off frequency (B T) of the gaussian baseband filter is varied. In a demodulator, a discriminator type circuit is used. Using the above degital radio GMSK modem, BER is theoretically derived and experimentally measured when 16Kbps PRBS data is transmitted under Rayleigh fading and additive white gaussian noise conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.336-342
• /
• 2003

In this paper, a new differential detector is introduced, in which a solar cell is used to reduce the low frequency interference from environmental optical noise. The solar cell also supplies electrical power to the detector circuit using the optical noise power. The DC voltage from the solar cell is used as a power supply to the detector, and the AC voltage is used to reduce the optical noise in a photodiode with the differential detection method. The signal to noise ratio was improved by about 20 dB.