• 대한전자공학회논문지TC
• /
• 제38권3호
• /
• pp.44-51
• /
• 2001

위성탑재 시스템은 일반 시스템과는 달리 열악한 우주환경으로 인하여 구현상 많은 제약이 따른다. 본 논문에서는 위성탑재 고해상도 합성개구레이다(SAR: Synthetic Aperture Radar)의 광대역 신호의 생성 및 처리 요구사항을 만족시키며 최소의 하드웨어로써 구현 가능한 ?V 스티칭 세그멘테이션(Chirp Stitching Segmentation) 기법을 이용하여 이에 적합한 송 수신부 하드웨어 및 운영 프로그램을 설계하고 구현하였다. Top-Down 방식의 설계 개념을 도입, 하드웨어는 장치(Equipment), 모듈(module), 회로(circuit)의 단계로, 소프트웨어는 SR(Software Requirement), AD(Architecture Design), DD(Detailed Design)의 단계별로 설계 요구조건을 마련하고 이를 만족하도록 설계, 구현하였다. 구현된 하드웨어의 동작을 확인하기 위해 두 개의 42.5MHz 신호로부터 두 배의 대역폭을 갖는 85MHz 신호를 생성 및 처리하였으며 동작을 확인하여 본 시스템이 고해상도 위성탑재 SAR에 적용 될 수 있음을 보였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제16권1호
• /
• pp.65-75
• /
• 2010

This is a comparative study mainly on foreign countries' domestic standards and laws on barrier free housing construction that can be applied to the dwelling of elderly friendly apartment housing. Eight countries - the United States, Germany, Canada, Switzerland, the United Kingdom, Australia, Japan, and China - were reviewed as foreign cases. The analyzed subjects were design standards only for the disabled and the aged. To compare barrier-free guides of the eight countries, each barrier-free guide on three space units (entrance, bedroom, living room) was divided into 11 design items and 36 design factors. The comparative analysis on foreign cases was based on the design guide according to Korea's KS P 1509 (principle and recommendation for designing dimension of dwelling in consideration of the elderly). Some factors -if with dimensions- were compared by means of the skewness of distribution. In the analysis result, there were not only common standards for the nine countries such as a dimension of the space for wheelchair movement but also different standards such as heights of outlets and horizontal lengths of bathtub grab bars. The detailed analysis shows that it is urgently necessary to prepare new domestic national design standards for 8 factors that foreign countries already have. It is also needed to immediately prepare dimension standards for the design factors, which have no detailed dimensions but only national guides, in consideration for anthropometric dimension.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.259-260
• /
• 2019

현재 한국의 Smart-Navigation Project를 통해서 VDES 시험망 구축 준비 및 시험용 서비스 솔루션 개발 과제를 수행하고 있다. 이 과제에서 VDES 통신망과 효율적인 서비스 제공을 위한 eNavigation 서비스 호스트/클라이언트 기능을 연동하는 구조를 설계한다. 제시한 구조는 VDES 해안국과 선박국, 게이트웨이, 서비스 호스트, 클라이언트 등의 개발 요소를 포함하고 있으며 이러한 VDES 시험망 장비들 간 연동을 위한 인터페이스 설계를 수행하였다. 본 논문에서 제시한 상세살계 연구는 VDES 시스템의 개발 요소인 메시지 정의, 인터페이스 설계, 메시지 운영 시나리오, 장비 설계 및 구현 방안 등을 포함한다. 우리는 설계된 인터페이스를 바탕으로 시험 장비를 제작 후, VDES 시험망을 위한 장비간 통합 및 연동 시험을 실내에서 진행할 예정이다. 그리고 실내시험을 통해 VDES 시험망을 충분히 시험한 후, 실제 해안국과 선박국에 시험망을 구축하여 실해역 시험을 2020년까지 진행하여 VDES 시험망의 적절성과 유효성을 검증할 예정이다.

• 한국농공학회지
• /
• 제43권4호
• /
• pp.79-88
• /
• 2001

Agricultural facilities can be designed by conceptual preliminary primary and detailed design stages. because each stage has a different objective, it must be applied to dissimilar design and analysis level. Engineers have to judge from evaluation that is estimated agricultural resources in the conceptual design stage. Methods of computer aided design are achieved to individual functions however it is inefficient to perform entire processes of design and hard to systematically accumulate results o design. Study on the integrated structural design system has been continued. but those system have adopted “closed architecture”which is known to inflexible method for developing applications. In this study the design platform is an environment that can support to integrated design system independently and an design platform is proposed by analyzing design processes using object oriented method. The concepts of software platform have resulted from several practical ideas, OOA/OOP and related some points. This paper aims at developing the software platform of a software environment to support the design phases of the agricultural facilities.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.32-49
• /
• 1996

An approach to providing computational support for concurrent design is discussed in the context of an automobile wiring harness design problem. Key issues include the development of an architecture that supports collaboration among specialists, the development of hierarchical representations that capture different characteristics of the design, and decomposition of tasks to achieve a tradeoff between efficiency and robustness of the system. We present an architecture in which the main design tasks are supported by agents-asynchronous and semi-autonomous modules that automate routine design tasks and provide specialized interfaces for working on particular aspects of the design. The agent communication and coordination mechanisms permit members of an engineering team to work concurrently, at different levels of detail and of different versions of the design. The design is represented hierarchically, with detailed models maintained by the participating agents. In conjunction with the architecture and design representations, issues pertaining to the exchange of information among different views of the design, management of dependencies and constraints, and propagation of design changes are discussed.

• 한국경영과학회지
• /
• 제21권3호
• /
• pp.127-141
• /
• 1996

In this paper, we propose a 7-phase life cycle model which applies to Computer Integrated Manufacturing systems. The model emphasizes product design and manufacturing design activities of CIM to secure the critical success factors of CIM systems such as high quality, adaptability, productivity, and flexibility. It is argued that the product design aspect would be divided into three phases-conceptual design, embodiment design, and detialed design. The conceptual design phase is to build a conceptual model of the product based on requirements and specifications which reflect "the voice of the customer". THe embodiment design phase utilizes specific design tools such as DFM, CAE, and CAD, and results in a concrete model of the product and parts. The detailed design phase is to crete a working prototype of the product and design tools such as DFA. CAD and CAM are employed in this phase. The output of the product design activity is to be the input for the manufacturing design activity. Using the proposed model, one can effectively and efficiently manufacture a high-quality, low-cost product with short delivery time, and above all achieve customer'ssatisfaction.isfaction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.848-854
• /
• 2005

In mechanical design part, though many design methodologies have been developed, most of them are applicable for detailed design. Therefore, when people had to do conceptual design, they relied on their individual creativity. To improve this phenomenon, some methodologies are developed such as TRIZ and axiomatic design. In this paper, both TRIZ and axiomatic design methodologies will be reviewed. In addition, some papers which contain conceptual design case study will be also dealt with. These case studies are results of application both axiomatic design and TRIZ methodology.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.11-21
• /
• 2019

In product design, the initial design stage is being increasingly emphasized because it significantly influences the successive product development and production stages. However, for larger and more complex products, it is very difficult to accurately predict product reliability in the initial design stage. Various design methodologies have been proposed to resolve this issue, but maintaining reliability while exploring design alternatives is yet to be achieved. Therefore, this paper proposes a methodology for conceptual design considering reliability issues that may arise in the successive detailed design stages. The methodology integrates the independency of axiomatic design and the hierarchical structure of failure mode, effects, and criticality analysis (FMECA), which is a technique widely used to analyze product reliability. We applied the proposed methodology to a liquefied natural gas fuel gas supply system to verify its effectiveness in the reliability improvement of the design process.

• Structural Engineering and Mechanics
• /
• 제30권6호
• /
• pp.733-761
• /
• 2008

The failure of reinforced concrete structures in recent earthquakes caused concern about the performance of beam column joints. Confinement of joint is one of the ways to improve the performance of beam column joints during earthquakes. This paper describes an experimental study of exterior beam-column joints with two non-conventional reinforcement arrangements. One exterior beam-column joint of a six story building in seismic zone III of India was designed for earthquake loading. The transverse reinforcement of the joint assemblages were detailed as per IS 13920:1993 and IS 456:2000 respectively. The proposed nonconventional reinforcement was provided in the form of diagonal reinforcement on the faces of the joint, as a replacement of stirrups in the joint region for joints detailed as per IS 13920 and as additional reinforcement for joints detailed as per IS 456. These newly proposed detailing have the basic advantage of reducing the reinforcement congestion at the joint region. In order to study and compare the performance of joint with different detailing, four types of one-third scale specimens were cast (two numbers in each type). The main objective of the present study is to investigate the effectiveness of the proposed reinforcement detailing. All the specimens were tested under reverse cyclic loading, with appropriate axial load. From the test results, it was found that the beam-column joint having confining reinforcement as per IS: 456 with nonconventional detailing performed well. Test results indicate that the non-conventionally detailed specimens, Type 2 and Type 4 have an improvement in average ductility of 16% and 119% than their conventionally detailed counter parts (Type1 and Type 3). Further, the joint shear capacity of the Type 2 and Type 4 specimens are improved by 8.4% and 15.6% than the corresponding specimens of Type 1 and Type 3 respectively. The present study proposes a closed form expression to compute the yield and ultimate load of the system. This is accomplished using the theory of statics and the failure pattern observed during testing. Good correlation is found between the theoretical and experimental results.

• 한국정밀공학회지
• /
• 제24권9호
• /
• pp.86-94
• /
• 2007

The design process must be planned carefully and executed systematically in order to support designers who are faced with many engineering design problems. In particular, conceptual design stage is very important than other stages such as detailed design or manufacturing stage on designing engineering systems. When designers are faced contradictory situation in task, conceptual design usually requires inventive thinking which depends on their creativity. And in order to develop good concepts, it is necessary to resolve contradictory situations during conceptual design. This paper presents a structure of systematic conceptual design process for designing engineering systems. And we developed the automatic feeding screw device using the proposed design process structure.