• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.106-113
• /
• 2013

Since the 1960's, diverse movements that oppose the uniform design tendency of modernism appears in Italy. Especially, Gaetano Pesce, who opposed uniformity and standardization that are based on mass production system, had interests in making unique product, not an identical product, while accepting modern production technology. Therefore, the purpose of this study is to comprehend Pesce's design, which creates diversity by arranging contingent, non-predictive, and episodic aspects in creative and acceptance processes according to the intension of the designer within mass production system, as a non-representational characteristic, which appears widely in modern thought and the arts, and examine how it is materialized in detailed design work. The study methods are first examining non-representation with theoretical contemplation and dealing with the design philosophy of Pesce based on the examination. Next, in order to discover non-representational characteristics that appear in the work of Pesce, it examines from introducing worker's creativity, user's possibility of choice, openness in the working process, and the aspects of researching materials. And a specific application method will be drawn through case analysis centered on furniture design. Gaetano Pesce's design that denies the world of representation based on the sameness comes to possess non-representational characteristics that acknowledge contingency and ceaselessly create difference by intentionally arranging during the working process.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.4
• /
• pp.15-27
• /
• 2021

Purpose: This study compares and analyzes the design drawing changes that occur during the design process between hospital design competition and the final detailed design. Based on this, factors that can reduce the rate of changes in drawings are derived. The purpose is to provide basic data to lessen the rate of the changes in the process of architecture design and can be reflected in the design competition guidelines. Methods: In this study, cases of hospitals are selected which are built in 5 recent years. Then compare and analyze the drawings which was drawn in the process from submission of competition to final design. After investigating the design changes that occur after the design competition, analyze the fixed-elements which are the main causes of design changes. Fixed-elements can be narrow down into few architecture-factors such as vertical-core, shafts, public-corridor, HAVC, and mechanical/electrical spaces. Results: Result of the rate of changes in each selected hospital floors can be sorted into variable-elements and fixed-elements which tells that the higher the rate of changes of the fixed-elements, the higher the rate of changes of the variable-elements. Implications: In other words, it can be said as the lower the change rates of the fixed-element, lower changes in whole design changes which represents that the greater the efficiency can be shown in the design process.

• Journal of the Korean Society of Earth Science Education
• /
• v.4 no.2
• /
• pp.151-165
• /
• 2011

Following a microgenetic design, this study was analysed the characteristic and the change of classification strategy that appear in college students' classification activity. The 4 tasks were developed for classification activity; a shell as a familiar real things, an animal fossil as a unfamiliar real things, a snow flake as a familiar picture cards and galaxy as a unfamiliar picture card. Achieved study to 6 college students who major in elementary education. Data were collected by interview with subjects, subject's classification schema, investigator's observation of subject's activity, and videotaped that record subject's subject classification process over an extended period of 6 times. Result proved in this study is as following. In the 6 times of the data collection procedures, a strategy F identifying concrete attribution of classification objects and a more detailed strategy X3 combining qualitative, spatial and dimensional attribution were found and more frequently used in both groups of college students which reported a classification process and did not report the process. While discovery and absorption of both a concrete classification strategy and a detailed classification strategy were rapidly developed in the reporting group, they were gradually developed in the non-reporting group. In addition to this, as the data collection procedures were progressing, the college students were familiar with change factors of classification tasks and in the case of pictures the classification strategy showed more desirable changes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.124-127
• /
• 2000

The finite element analyses of the wrinkling initiation and growth in the sheet metal forming process provide the detailed information about the wrinkling behavior of sheet metal. The direct analyses of the wrinkling initiation and growth, however, bring about a little difficulty in complex industrial problems because it needs large memory size and long computation time. For the description of wrinkling growth, the mesh elements should be sufficiently small and the size of finite element matrix becomes large. In the static implicit finite element method therefore, the direct analysis of wrinkling growth in a complex sheet metal forming process is rather difficult. From the industrial viewpoint of tooling design, the readily available information of possibility and location of wrinkling is sometimes more preferable to the detailed time-consuming information. In the present study, therefore, the wrinkling factor that shows locations and relative possibility of wrinkling initiation is proposed as a convenient tool of relative wrinkling estimation based on the energy criterion. The location and relative possibility of wrinkling initiation are predicted by calculating the wrinkling factor in various sheet metal forming processes such as cylindrical cup deep drawing, spherical cup deep drawing, and elliptical cup deep drawing. The wrinkling factor is also implemented in the analysis of the door inner stamping process to predict wrinkling.

• Journal of KIISE:Software and Applications
• /
• v.32 no.3
• /
• pp.163-172
• /
• 2005

Product Line Engineering (PLE) has been widely accepted as a representative software reuse methodology by using core assets. Product line architecture (PLA) is a key element of core assets. However, current research works on designing PLA do not provide sufficient and detailed guidelines of defining PLA and reflecting variability in the architecture. In this paper, we present a reference model of PLA and propose a process to design PLA with detailed instructions. Especially architectural variability is codified by describing decision model depending variation points and traced through PLA activities. The proposed process would make it feasible to apply PLE to practice areas.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.53-61
• /
• 2004

Condenser tube which is used for a cooling system of automobiles is mainly manufactured by conform extrusion. However, direct extrusion using porthole die in comparison with conform extrusion has many advantages such as improvement of productivity, reduction of production cost etc. In general, the porthole die extrusion process is useful for manufacturing long tubes with hollow sections and consists of three stages(dividing, welding and forming stages). Especially, Porthole die for producing condenser tube is very complex. Thus, in order to obtain the detailed mechanics, to assist in the design of proper die shapes and sizes, and to improve the quality of products, porthole die extrusion should be analyzed in as non-steady state as possible. This paper describes FE analysis of non-steady state porthole die extrusion for producing condenser tube with multi-hole through 3D simulation in the non-steady state during the entire process to evaluate detailed metal flow, temperature distribution, welding pressure and extrusion load. Also to validate FE simulation of porthole die extrusion, a comparison of simulation and experiment results was presented in this paper.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.97-104
• /
• 2007

In this paper, we have proposed an integrated aircraft development environment which can support virtual design and development for Systems Engineering and IPPD(Integrated Product and Process Development). We have also proposed the ViMS(Virtual Mockup System) which can perform a system design review on an integrated aircraft development environment. The ViMS is an integrated virtual design support system with immersive design review functionality to make a virtual mockup instead of a physical mockup through the virtual reality technology. The functionality of the ViMS consists design data management, design technology, design verification, and design assessment. We have described the detailed development artifact, case studies and conclusions of using the ViMS functionality.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.828-835
• /
• 2006

Spacer grid springs support the fuel rods in a nuclear fuel system. The spacer grid is a part of a fuel assembly. Since a spring has repeated contacts with the fuel rod, fretting wear occurs on the surface of the spring. Design is usually performed to reduce the wear. The conceptual design process for the spring is defined by using the Independence of axiomatic design and the design is carried out based on the direction that the design matrix indicates. For detailed design an optimization problem is formulated. In optimization, homologous design is employed to reduce fretting wear. The deformation of a structure is called homologous if a given geometrical relationship holds for a given number of structural points before, during, and after the deformation. In this case, the deformed shape of the spring should be the same as that of the fuel rod. 1bis condition is transformed to a function and considered as a constraint in the optimization process. The objective function is minimizing the maximum stress to allow a local plastic deformation. Optimization results show that the contact occurs in a wide range. Also, the results are verified by nonlinear finite element analysis.

• International Journal of Concrete Structures and Materials
• /
• v.4 no.1
• /
• pp.25-36
• /
• 2010

This paper presents the influence of various flexural strengthening design criteria specified by three important design guidelines (ACI440, TR55, FIB14) on the resulting strength, ductility and conservativeness of FRP strengthened RC elements. Various generalised mathematical relations in non-dimensional form are presented that can be employed to develop design aids for the FRP-strengthening process. A design methodology is prescribed based on these equations enabling the designer to optimally and intuitively incorporate sufficient ductility while designing for strength. In order to better interpret conservativeness within design codes, four distinct levels of embedded conservativeness are identified, which cover the entire range of sources of conservativeness. Finally, a detailed parametric study is presented, using the proposed design equations and methodology, to determine the influence of each of these four levels of conservativeness on final design solutions. Specific criteria that are useful while calibrating design guidelines are also presented.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.341-345
• /
• 2007

Broadband Convergence Network (BcN) can provide a range of quality guaranteed broadband multimedia services through packet-based converged transport network. For providing new emerging application services in due season over BcN, it is important for network designers or planners to develop a new design methodology for BcN, which differs from legacy design processes applied to a single service network. This paper thus introduces a new design concept and detailed design processes for KT-BcN. We also present a design example of BcN control network using a design system that we have developed.