• The KSFM Journal of Fluid Machinery
• /
• v.16 no.6
• /
• pp.12-18
• /
• 2013

This paper presents the performance characteristics of a centrifugal blower using the design parameters of an impeller blade. Two design variables, the bending length from the blade trailing edge and bending angles of an impeller blade, are introduced to analyze the effects on the blower performance. Three-dimensional Navier-Stokes equations with shear stress transport turbulence model are introduced to analyze the performance and internal flow of the blower. Relatively good agreement between experimental measurements and numerical simulation at the design flow condition is obtained. Throughout present study, it is known that pressure increases as the bending length from the trailing edge and bending angle increase while efficiency decreases. But efficiency is decreased. Detailed flow field inside the centrifugal blower is also analyzed and compared.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.3
• /
• pp.362-373
• /
• 2004

In this study, we introduce a noble neurogenetic approach to the design of the fuzzy controller. The design procedure dwells on the use of Computational Intelligence (CI), namely genetic algorithms and neurofuzzy networks (NFN). The crux of the design methodology is based on the selection and determination of optimal values of the scaling factors of the fuzzy controllers, which are essential to the entire optimization process. First, tuning of the scaling factors of the fuzzy controller is carried out, and then the development of a nonlinear mapping for the scaling factors is realized by using GA based NFN. The developed approach is applied to an inverted pendulum nonlinear system where we show the results of comprehensive numerical studies and carry out a detailed comparative analysis.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.1
• /
• pp.68-85
• /
• 1998

Solid modeling refers to techniques for unambiguous representations of three-dimensional objects. Feature recognition is a sub-discipline focusing on the design and implementation of algorithms for detecting manufacturing information such as holes, slots, etc. in a solid model. Automated feature recognition has been an active research area in stolid modeling for many years, and is considered to be a critical component for CAD/CAM integration. This paper gives a technical overview of the state of the art in feature recognition research. Rather than giving an exhaustive survey, I focus on the three currently dominant feature recognition technologies: graph-based algorithms, volumetric decomposition techniques, and hint-based geometric reasoning. For each approach, I present a detailed description of the algorithms being employed along with some assessments of the technology. I conclude by outlining important open research and development issues.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.405-410
• /
• 2015

This paper deals with the design method of 1kW-Switched Reluctance Generator (SRG) for wind power applications. The coefficient of the output equation is determined according to the purpose specification for design of SRG. Detailed design is carried out, after selecting the outer diameter of the rotor on the basis of the output equation. The generation characteristic of designed generator is verified by using Finite Element Method (FEM).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.1
• /
• pp.8-13
• /
• 2010

The shaft surface machining is a popular machine for studying descale machine design and process in automobile industry. In this study, the descale design machine of cutting shaft surface was conducted for the detection of a tool failure in surface process. Induction harden surface is used as analyzing function to detect a sudden change in cutting process level. A preliminary stepped workpiece which had a hard condition was cut by the surface tool and a tool process obtained cutting force machine. At machine failure, the results were suddenly increased and the detailed surfaces were extremely obtained.

• KIEAE Journal
• /
• v.2 no.1
• /
• pp.21-32
• /
• 2002

This study aims to find out the way of revitalizing of natural riverfront space in terms of ecological aspect. At the first part, theoretical made in terms of concept, planning aspects and techniques which were main bases for the study. It begins by explaining the concept of ecological riverfront space, the main aspect and techniques of its planning. After this, it analysis eight cases(four cases in Korea, Swiss, Germany, America and Japan) in terms of the objects, planning techniques and the results of development. It continues by making detailed analysis according to four objectives like 'protection from flood', 'quality of the river', 'ecological preservation' and 'active usage of riverfront space'. It ends by evaluating the relationship between objectives and the planning which will be adapted to the future development of riverfront space with ecological aspect. In conclusion, hereafter will propose desirable design-direction for revitalization about riverfront space about ecological aspect design in urban.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.517-525
• /
• 1996

A Simple AC complex circuit analysis for LCL type series resonant converter with phase shift control is proposed. Based on these analyses, a set of characteristic curves which allows a optimal design procedure for this converter is shown, without increasing the volt-ampere rating of tank circuit Especially, inverter output peak current can be minimized in both full load and partial load conditions. The presented design considerations can make the load range wide from full loads to light loads achieving turn-on with zero voltage switching (ZVS) operation. The detailed analysis and experimental results show the effectiveness of the proposed design algorithms. (author). refs., figs., tab.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.205-206
• /
• 2005

The plan for Shinseon Seolleongtang Restaurant in Kimpo has as its goal to create an environment strongly fused with the design of the modern city and the spirit of food culture craftsmanship, and it proceeded as follows. In order to carry out the goal of the plan, the direction of the design concept was set to be a harmonious blending of Ecology and Minimal. Also, for detailed plan direction, in the Minimal domain, conciseness, cleanliness, and high quality were established as the ultimate goals in order to create a spacious food and drink area in today's complicated and energy-draining society, and in the Ecology domain, ancient hieroglyphs representing the forms of natural objects were used that prayed for years of plentiful harvest and blessing, and colorfully expressed the events of the populace.

• IE interfaces
• /
• v.20 no.2
• /
• pp.162-176
• /
• 2007

As facing the rapid advance of information technologies, the postal service is required to have capabilities of real-time logistics characterized by collaboration, ubiquity and intelligence which are necessary to the organizational management. In this study we discuss the design of the next generation information system based on real-time enterprise strategy to achieve real-time integrity and upgrade of postal information system. After briefly addressing the issues on developing information system and current situation, we provide the design direction and the framework of the to-be system. We develop detailed specification of each subsystem and provide an operational scenario. We believe when this framework is put into use, it can contribute to competitive performance by giving the integrity and consistency in implementing information systems of the Korea Postal Service.

• Nuclear Engineering and Technology
• /
• v.39 no.3
• /
• pp.187-192
• /
• 2007

The basic research on fast reactor technology was started in the mid-1960's in China. The emphasis was put on fast reactor neutronics, thermohydraulics, sodium technology, materials, fuels, safety, sodium devices and instrumentation. In 1987, the research turned to applied basic research with the conceptual design of a 60 MW experimental fast reactor as a target. The Project of the China Experimental Fast Reactor(CEFR) with a thermal power 65 MW was launched in 1993. The R&D of fast reactor technology then carried out to serve a design demonstration connected with the different phases of the conceptual, preliminary and detailed design of the CEFR. Recently, three directions of fast rector technology R&D activities have been considered, and some research programs have been developed. They are: (1) R&D related to the CEFR, i.e. experiments to be conducted on the CEFR for its safe operation, (2) R&D related to the projects of a prototype and the demonstration of fast reactors, and(3) advanced SFR technology within the framework of the international cooperation of INPRO and GIF.