• Coupled systems mechanics
• /
• 제3권1호
• /
• pp.53-71
• /
• 2014

Accurate prognoses of the durability of concrete structures require a detailed description of the continuously running aging processes and a consideration of the complete load history. Therefore, in the framework of continuous porous media mechanics a model is developed, which allows a detailed analysis of the most important aging processes of concrete as well as a flexible coupling of different processes. An overview of the prediction model and the balance equations is given. The material dependent model equations, the consequences of coupling different processes and the solution scheme are discussed. In two case studies the aging of concrete due to hydration and chloride penetration are presented, which illustrate the capabilities and the characteristics of the developed model.

• 한국유체기계학회 논문집
• /
• 제12권5호
• /
• pp.47-53
• /
• 2009

A rotordynamic and detailed stability analysis in accordance with API 617 standard were performed with a turbo-compressor, which is one of key rotating machinery in refinery, petroleum, and power plants. The system is composed of rotor shaft, impeller, sleeve hub, balance drum, and coupling hub. The rotor system is supported by tilting pad bearings, which has 5 pads and pad on loading condition. The rotordynamic analysis specified by API 617 includes the critical speed map, mode shape analysis, Campbell diagram, unbalance response analysis, and stability analysis. In particular, the specifications of stability analysis consist of a Level 1 analysis that approximates the destabilizing effects of the labyrinth seals and aerodynamic excitations, and Level 2 analysis that includes a detailed labyrinth seal aerodynamic analysis. The results of a rotordynamic analysis and stability analysis can evaluate the operating compressor health and can be utilized as a guide of its maintenance, repair and trouble solution.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.159-166
• /
• 2019

The seismic PSA is to probabilistically estimate the potential damage that a large earthquake will cause to a nuclear power plant. It integrates the probabilistic seismic hazard analysis, seismic fragility analysis, and system analysis and is utilized to identify seismic vulnerability and improve seismic capacity of nuclear power plants. Recently, the seismic risk of domestic multi-unit nuclear power plant sites has been evaluated after the Great East Japan Earthquake and Gyeongju Earthquake in Korea. However, while the currently available methods for system analysis can derive basic required results of seismic PSA, they do not provide the detailed results required for the efficient improvement of seismic capacity. Therefore, for in-depth seismic risk evaluation, improved system analysis method for seismic PSA has become necessary. This study develops a system analysis method that is not only suitable for multi-unit seismic PSA but also provides risk information for the seismic capacity improvements. It will also contribute to the enhancement of the safety of nuclear power plants by identifying the seismic vulnerability using the detailed results of seismic PSA. In addition, this system analysis method can be applied to other external event PSAs, such as fire PSA and tsunami PSA, which require similar analysis.

• 수산경영론집
• /
• 제54권3호
• /
• pp.17-28
• /
• 2023

In this study, a conjoint analysis was conducted to derive a combination of fishing quota management system by fish species preferred by fishermen. In the analysis, detailed levels were set according to each attribute of the system. For analysis, this study conducted a design question survey for conjoint analysis on 303 fishermen engaged in fishing activities in the offshore and coastal sea. The Conjoint analysis was conducted on all fishermen, offshore fishermen and coastal fishermen. In addition, an analysis was conducted on TAC system participants and non-TAC system participants, and the targets were classified for comparison according to the characteristics of fishermen. Fishermen's preference for the system confirmed for six attribute ("catching fish even if there is no fishing quota", "how to allocate fishing quota", "fishing quota management agency", "upper limit of fishing quota," "Possibility of Trading in the Fishing Quota", and "Application of Other Regulations.") and the detailed level of each attribute. As a result of the analysis of the importance of attributes, fishermen thought that "fishing quota management agency (24.1%)" was very important, and "catching fish even if there is no fishing quota (23.9%)" and "how to allocate fishing quotas (22.9%)" were also given some importance.

• 한국조리학회지
• /
• 제11권4호
• /
• pp.134-149
• /
• 2005

First, generally the more business employ the financial and non financial outcome analysis for evaluation process, the higher the success rate of new product development becomes in the domestic restaurant market. Second, the study shows that the financial outcome tends to be considered more than non financial outcome on deciding success of the new product development. Third, it is indicated that although detailed plans have a large impact on the outcome of new product development, communication between departments within a company is not a considerably important factor for deciding success of the new product. Fourth, 'market environment' has significant influence on deciding adoption level of financial and non financial outcome analysis, organizational resources and culture.

• 한국항공운항학회지
• /
• 제10권1호
• /
• pp.9-20
• /
• 2002

In aviation, it is important to analyse and classify human error in detail. Because human error has been implicated in 70 or 80% of aviation accidents in literature review. But, there is little detailed classification and research of human error. In this study, Objectives are to establish human error model by classifying types of human error in detail and also to analyse human factors by using the established model. Analysis of the data uses Korea Aviation Incidents Reporting System(GYRO). The resulting from actual analysis, there is a some difference between flight steps for human error occurrence and types of human error are different according to the aviation personnel(pilot, ATC controller).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.446_447
• /
• 2009

This paper describes operational analysis results of the DC micro-grid using detailed model of distributed generation. Detailed model of wind power generation, photo-voltaic generation, fuel-cell generation was implemented with the user-defined model of PSCAD/EMTDC software that is coded with C-language. Various simulation results confirm that the DC micro-grid can operate without any problem in both the interconnected mode and the islanded mode. The operation analysis result confirms that the DC micro-grid make it feasible to provide power to the load stably.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.51-57
• /
• 1999

Recently, long large bridges are built for mass transportation. Movable bearing shoes are important components of the bridges because they support movement of translation and rotation of bridge. In design stage of the long large bridges, detailed analyses using the finite element method are performed to guarantee safety and reliability. For that purpose, three-dimensional modeling is carried out by I-DEAS software and finite element analysis by ANSYS software. Results of the analyses are reviewed and important design factors for movable bearing shoes are discussed.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.48.1-48.1
• /
• 2011

In this presentation, We monitored weather data, such as global irradiance, ambient temperature, temperature of PV module, relative humidity and windspeed for 2 years, for determining accelerated test condition. then, we determined the temperature limit of accelerated test through weather data and FEM analysis. Detailed procedures will be summarized in this work. After analysing outdoor stress such as thermal stress, we decided main failure modes and mechanisms of PV module, especially solder joint of ribbon wire. we carried out the measurement of material properties such as thermal expansion coefficient for planning of accelerated test. we designed accelerated test based on FEM analysis results. we carried out thermal cycling test with 1 cell mini module for 3 months. We monitored the change of electrical performance every 1 week such as Voc, Isc, Pmax, etc. and then, we analized the ribbon wire/electrode intefaces. Detailed results will be summarized in this work.

• 한국CDE학회논문집
• /
• 제12권2호
• /
• pp.101-108
• /
• 2007

As 3D solid modeling has been widely used in designing products, solid models of the products are directly used in various applications such as engineering analysis and process planing. However, the fully-detailed solid models may not be necessary in some application. For example, it is often more efficient to use simplified model of part of engineering analysis. Generation of mesh for the complex original model requires a quite amount of time, and the consequence of finite element analysis may not be desirable due to small and detailed geometry in the model. In this paper, a method to simplify solid models of machined part is presented. This method decomposes the delta volume of machined part, and uses the decomposed volumes to simplify the solid model. Since this method directly recognizes the features to be removed from the final model, it is independent of not only design features of specific CAD system, but also designer's design practice of design sequences.