• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.13 no.22
• /
• pp.113-120
• /
• 1990

This paper is concerned with marginal analysis in the detailed estimation method. In a broad sense all estimates are marginal estimates in as much as they are concerned with creating changes from a current course of action. Only after a detailed ostinato is made can the engineering realize and exploit the advantages of marginal analysis. Marginal analysis is good tool for nonlinear break-even analysis adapted real world, and much more information and efficiency of CVP(Cost-Volumn-Profit) are provided with marginal analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.569-572
• /
• 2003

In VLM-ST process, the fine detailed shape processing process is needed due to the use of thick sheets for layers. The developed process perform the fine detailed shape processing in VLM-ST parts using non-contact hot tool. To predict the heat-affected zone and temperature distribution of VLM-ST parts in detailed shaping, the heat flux from the tool to the surface was calculated for the finite element analysis by modeling the tool as a heat source of radiation. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the analysis. The results showed a good agreement with the experiments.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.1
• /
• pp.57-76
• /
• 2005

A standardized ergonomics kit is suggested to evaluate and reduce musculoskeletal hazards that yield large socioeconomic burdens in the work system. This kit comprises basic and detailed analysis tools with proper tool selection rules. The basic tool includes a checklist for various risk factors to screen potentially hazardous jobs among manual works. Selective detailed analysis tools can then be applied to the screened job lists for more quantitative and precise evaluation. The tool selection rules are devised for using the basic and detailed analysis tools in a mutually supplemental way. To validate the standardized ergonomics kit, it was applied to evaluate jobs related to the musculoskeletal hazards in a paper-making industry. Among 101 manual jobs investigated, 44 potential hazardous jobs were screened during basic investigation phase and finally 16 hazardous jobs were identified by the detailed analysis phase. The result provided fairly promising ideas of ergonomic interventions for the hazardous jobs.

• Journal of the Korean Society of Combustion
• /
• v.13 no.1
• /
• pp.17-22
• /
• 2008

A partly implicit/quasi-explicit method is introduced for the solution of detailed chemical kinetics with stiff source terms based on the standard fourth-order Runge-Kutta scheme. Present method solves implicitly only the stiff reaction rate equations, whereas the others explicitly. The stiff equations are selected based on the survey of the chemical Jaconian matrix and its Eigenvalues. As an application of the present method constant pressure combustion was analyzed by a detailed mechanism of hydrogen-air combustion with NOx chemistry. The sensitivity analysis reveals that only the 4 species in NOx chemistry has strong stiffness and should be solved implicitly among the 13 species. The implicit solution of the 4 species successfully predicts the entire process with same accuracy and efficiency at half the price.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.696-699
• /
• 2004

Generally, the time history analysis among seismic response analyses of a structure needs more times than static analysis. Therefore the mechanical model of a structure has been used as a simple lumped parameter model in time history analysis. For the most cases, the simple mechanical model shows the similar results to that of detailed finite element model. so it is reasonable to use the simple mode] in preliminary analysis. In seismic design of liquid storage tank, such as LNG storage tank, the lumped parameter mode] also is being used in preliminary analysis, however sometimes shows the differences to the results of detailed finite element model. Therefore in this study, the dynamic characteristics between lumped parameter model and detailed finite model is compared for the variables such as height/diameter of liquid-storage tank and thickness of wall, then the applicability of beam mode] to the seismic response analysis are evaluated for some liquid storage tanks.

• KIEAE Journal
• /
• v.2 no.1
• /
• pp.11-19
• /
• 2002

This Study aims to find out the planning aspects and detailed techniques in terms of concept of the Ecological Industrial Parks. It consists of the three parts : Firstly, according to theoretical review, this study gives a definition of the concept of ecological industrial parks. Secondly, it institutes planning aspects of ecological industrial parks based on the main concept. Thirdly, 8 case studies show us analysis of detailed techniques used each planning aspects. Ecological industrial parks mean industrial systems which make energy and substance circulated in order to reduce environmental pollutions inside and outside of park like natural ecosystem. To actualize ecological industrial parks, we have to adopt 3 planning aspects which are energy and substance recycling system, environmentally-friendly site planning based on ecology concept, constructing of ecological production and management. In case study, detailed techniques from each planning aspects are shown in table 8. As a result of case study, detailed techniques about planning of energy and substance recycling system is accommodated most. On the other hand, environmentally-friendly site planning techniques based on ecological concept is used passively. And detailed techniques about constructing of ecological production and management are very various as each cases. Finally, in terms of analysis, this study shows us appliable planning when we develop domestic Ecological industrial parks.

• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.553-566
• /
• 2009

In-phase control and energy-optimized control are the two major control strategies proposed for series power quality controllers (SPQC). However quantitative analysis and comparison between these two control strategies is quite limited in previous publications. In this paper, an extensive quantitative analysis is carried out on these two control strategies through phasor diagram approach, and a detailed quantitative comparison is conducted accordingly. The load current is used as the reference phasor, and this leads to a simpler and clearer phasor diagram for the quantitative relationship. Subsequently detailed analysis of SPQC using in-phase control and energy-optimized control are provided respectively, under different modes both for under voltage/voltage sag and for over voltage/voltage swell. The closed form analytic expressions and the curves describing SPQC compensation characteristics are obtained. The detailed system power flow is figured out for each mode, and the detailed quantitative comparison between the two control strategies is then carried out. The comparison covers several aspects of SPQC, such as required compensating voltage magnitude, required capacity of energy storage component, and maximal ride-through time. In the end, computer simulation and prototype experimental results are shown to verify the validity of all the analysis and the result of the comparison.

• Journal of Information Technology Services
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2021

As a key of access to public participation and information, e-government is taking the active role of public service by relevant laws and policy measures for universal use of e-government websites. To improve the accessibility of web contents, the level of deriving the results for each detailed evaluation item according to the Korean web contents accessibility guideline is carried out, which is an important factor according to the detailed evaluation items for each website property and requires data-based management. In this paper, detailed indicators are analyzed based on the quality control level diagnosis results of existing domestic e-government websites, and the results are classified according to high and low to propose new improvement directions and induce detailed improvement. Depending on the necessity of management according to the detailed indicators for each website attribute, not only results but also level diagnosis to strengthen web service quality suggests directions for future improvement through accurate detailed analysis and research for policy feedback. This study ultimately makes it possible to expect government system management based on predicted data through deduction history management based on evaluation score data on public websites. And it provides several theoretical and practical implications through correlation and synergy. The characteristics of each score for the quality management of public sector websites were identified, and the accuracy of evaluation, the possibility of sophisticated analysis, such as analysis of characteristics of each institution, were expanded. With creating an environment for improving the quality of public websites and it is expected that the possibility of evaluation accuracy and elaborate analysis can be expanded in the e-government performance and the post-introduction stage of government website service.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.155-158
• /
• 2006

This study aims to uncover the problems that are embedded on the detailed design processes of the major domestic EPC companies. To set the research frame, previous studies were analyzed and interviews were conducted for the industry experts. To draw fundamental factors that may affect on the effectiveness of detailed design processes, questionnaire surveys were conducted to those who involved in detailed design and who have design experiences. Analysis results indicated that there are rooms for improvement on the detailed design processes. This study will be a guidance for future researches that must be followed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.262-272
• /
• 2015

The aim of this study is to analysis factors that determine the competitiveness of container ports using the KJ and AHP methods. For this, 54 detailed attributing factors were identified both by previous studies and port users. 24 attributing factors were identified by a group of port experts. also, These were grouped 18 detailed attributing factors into 6 attributing factors by a group of port experts using the KJ method. These were made into a model of hierarchical structure with 3 levels, taking 1 goal factor, 6 evaluation factors and 18 detailed evaluation factors. The collected date of questionnaires were analyzed by a group of port experts using the AHP method. The analysis result of the evaluation factors in container port shows that port cargo volume is the most important factor, followed by port location, port cost, port service, port facility and port management. The analysis results of detailed evaluation factors in container port shows that import and export cargo volume is the most important factor, followed by transshipment cargo volume, distance from main trunk, cargo handling cost, distance from the point of importing and exporting, speediness of cargo handling, stability of cargo handling, vessel/cargo cost in port entry and leaving, punctuality in port entry and leaving, number and length of berth, collateral service cost, terminal area, hinterland accessibility, ability of terminal operation company, front depth of berth, etc.