• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.83-91
• /
• 2015

The redox reaction $M^{(x+n)+}+\frac{n}{2}O^{-2}{\rightleftarrows}M^{x+}+\frac{n}{4}O_2$ of multivalent ions in glass melts influences the melting process and final properties of the glass including the fining (removal of bubbles), infrared absorption and homogenization of melts, reaction between metal electrodes and melts or refractory and melts, and transmission and color of glass. In this review paper, the redox behaviors that occur frequently in the glass production process are introduced and the square wave voltammetry (SWV) is described in detail as an in situ method of examining the redox behavior of multivalent ions in the melt state. Finally, some voltammetry results for LCD glass melts are reviewed from the practical viewpoint of SWV.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.268-272
• /
• 1996

The removal of impulsive noise terms which occur in interventricular pressure (IVP) signals of a Korean-type total artificial heart is essential for estimation of atrial pressure change. We compared various order statistic filters and conclude that median filter with sidelength L = 1 is the most appropriate filter for IVP signals in the perspectives of operation cost, detail preserving (peak value), and waveform.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1278-1280
• /
• 2003

Striping is a main factor for imaging spectroradiometer data, which is obtained by multi-sensor scanning on spacecraft. The reason causing stripes and the development of striping removal methods are simply described in this paper, particularly, the principle of Matching Empirical Distribution Functions is introduced in detail. By using this method, some experiments are done to destripe imaging spectrometer data of SZ-3. The result shows that the method of Matching Empirical Distribution Functions is available for destirping Imaging spectroradiometer data of SZ-3, and the quality of image is improved obviously. This will help to process the future similar instruments data.

• Journal of Korean Society of Water and Wastewater
• /
• v.16 no.6
• /
• pp.663-669
• /
• 2002

Electro-flotation (EF) has shown advantages, such as a high removal efficiency and easy control of bubble generation, over dissolved air flotation. However, the fundamental characteristics of the process have not been investigated in detail. According to recent modeling results from trajectory analysis, the size of the bubble is one of the most important factors that affect the efficiency of collision between bubble and particle. In this paper, the size characteristics of bubbles generated from EF under various conditions are measured using a new method for bubble size measurement, the Particle Counter Method (PCM). The size of the generated bubbles was found to be constant with respect to applied voltage but to vary with the electrode materials. These results and their implications are discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.3
• /
• pp.653-669
• /
• 2024

Dynamic scene deblurring is a complex computer vision problem owing to its difficulty to model mathematically. In this paper, we present a novel approach for image deblurring with the help of the sharp reference image, which utilizes the reference image for high-quality and high-frequency detail results. To better utilize the clear reference image, we develop an encoder-decoder network and two novel modules are designed to guide the network for better image restoration. The proposed Reference Extraction and Aggregation Module can effectively establish the correspondence between blurry image and reference image and explore the most relevant features for better blur removal and the proposed Spatial Feature Fusion Module enables the encoder to perceive blur information at different spatial scales. In the final, the multi-scale feature maps from the encoder and cascaded Reference Extraction and Aggregation Modules are integrated into the decoder for a global fusion and representation. Extensive quantitative and qualitative experimental results from the different benchmarks show the effectiveness of our proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1342-1348
• /
• 2017

In an era where digital data takes on great importance, images are essential to various media. Noise is generated during the acquisition and transmission of such images, caused by a number of external factors. The removal of noise is an essential step in image processing. There are various methods used to remove noise, in accordance with the cause or form of the noise. AWGN is one of the leading methods. As such, this paper applies the edge detection method using the mean of each pixel after categorizing in detail the partial masks into nine areas as part of the preliminary process, in order to minimize noise that had been added to the image. In addition, the paper suggests an algorithm that applies different filters to the partial masks by using the critical mass value of the transfigured edge detection. To verify the competence of the suggested algorithm, it was compared with existing methods by using magnified images and PSNR(peak signal to noise ratio).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.81-88
• /
• 2017

This paper proposes a method of detecting rain regions from a single image. More specifically, a way of training the deep convolutional neural network based on the collected rain and non-rain patches is presented in a supervised manner. It is also shown that the proposed rain detection method based on deep convolutional neural network can provide better performance than the conventional rain detection method based on dictionary learning. Moreover, it is confirmed that the application of the proposed rain detection for rain removal can lead to some improvement in detail representation on the low-frequency regions of the rain-removed images. Additionally, this paper introduces the rain transfer method that inserts rain patterns into original images, thereby producing rain effects on the resulting images. The proposed rain transfer method could be used to augment rain patterns while constructing rain database.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.463-466
• /
• 2008

With the development of Information Technology in recent years, the image has been an important means to store or express information. Generally, during the process of acquiring and storing images, the images can be corrupted by noise of which typical types are Impulse(Impulse Noise) and AWGN(Addiction White Gaussian Noise). Impulse noise shows irregularly in black and white over the length and breadth of the image by sharp and sudden disturbance of the image signal. In the Impulse noise environment, SM(Standard Median) filter would be used because of its good noise removal performance and simple algorithm. However, when SM filter removes noise, it also produces error at the edge of image and causes whole image quality deterioration. In this paper, we propose a method based on modified nonlinear filter operation scheme which enhances the features of noise removal and detail image preservation when restoring image in Impulse noise environment. And, we compared it with existing methods and the performances through simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1251-1259
• /
• 2013

In this study, high temperature design and creep-fatigue damage evaluation of a decay heat exchanger (DHX) in the decay heat removal systems of a sodium-cooled fast reactor (SFR) have been performed. Detail design and 3D finite element analysis have been conducted for the DHXs to be installed in active and passive decay heat removal systems in Korean Generation IV SFR, and the DHX installed in the STELLA-1(Sodium integral effect test loop for safety simulation and assessment) at KAERI (Korea Atomic Energy Research Institute). Evaluations of creep-fatigue damage based on full 3D finite element analyses were conducted for the two Mod.9Cr-1Mo steel heat exchangers according to the elevated temperature design codes of ASME Section III Subsection NH and RCC-MR code. Code comparisons were made based on the creep-fatigue damage evaluation and issues on conservatisms of the design codes were discussed.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.6
• /
• pp.911-918
• /
• 2006

This study was conducted to evaluate the effect of the launder type on settling performance and hydrodynamic behavior within the two certain full-scale sedimentation basins (each flow rate/one basin; $10,000m^3/d$); one is the transverse typed launder(existing basin) and the other is building the finger type launder in combination with the longitudinal baffle. Comparative experimental investigations have been carried out through residual turbidity and particle concentration measurements in each effluent from two basins with the transverse and the finger type launders, respectively. From the experimental results, we could observe that turbidity removal rate in the finger type launder basin (modified basin) is about 30% higher than that in the transverse type launder basin (existing basin). Also, from the measurement of total particle concentration in each effluent, the removal efficiency was improved about 27% within modified basin compared to the existing basin. In order to explain the comparative experimental results and investigate the hydridynamic behavior within each basin in more detail, we conducted computational fluid dynamics (CFD) simulation and verified simulation results with acoustic Doppler velocimetry (ADV) technique. From the CFD simulation, it was investigated that extreme upward flow occurs underneath of the transverse launder. On the other hand, in the case of modified basin, the upward flow, which occurred in the beneath of launder, was much less than that in the existing basins.