• 한국광학회지
• /
• 제22권1호
• /
• pp.58-63
• /
• 2011

외선 점광원 탐지장비의 탐지성능 예측을 위한 최소탐지조도(MDI)를 측정하고 실험결과를 제시하였다. 최소탐지조도 측정은 시준기를 이용하여 실험실 환경에서 수행할 수 있는 방법으로 구현하였으며 측정에 따르는 시험조건 및 절차를 상세히 기술하였다. 또한 최소탐지조도 측정 결과를 이용하여 분석한 적외선 탐지장비의 최대탐지거리 예측결과를 제시하였다.

• Korean Journal of Geomatics
• /
• 제3권1호
• /
• pp.73-79
• /
• 2003

To manage national territory and cadastral data efficiently, accuracy and cost-efficiency in cadastral boundary surveying is inevitable. The efficient management of cadastral data is a very important element in national land management. Survey techniques are being introduced. Recently, improvements in survey techniques have been made with the development of satellite surveying, Allowing accurate and fast surveys. If we can calculate the output accurately in real-time in survey fields, it will open a new method in cadastral detail surveying. According to the classification on Law of cadastral surveying, Cadastral surveying can be divided into cadastral control point surveying and cadastral detail surveying. The control point survey can be divided into cadastral triangulation surveying and cadastral traverse surveying. The detailed survey is usually perform by plane surveying. Among these, cadastral detail surveying will be reviewed in this study. In this study, the combination of the satellites, such as US managed GPS and Russian managed GLONASS was used. In the satellite survey in downtown, data interruption symptoms arose(according to the mask angle of the satellite). Therefore; we combined the satellites to get date more accurately. A block of Haewoondae New City in Busan, Korea, which has Numerical Cadastral Law was selected as the sample area for this study. Block II and III are surrounded by high rise apartments. One side of Block I and IV is level ground and the other side is full of high rise apartments. Especially, Block II is surrounded by high rise apartment houses with 20 meters width. In the results of the study Block II did not satisfy the allowable precision, while Block I, II and IV satisfied the allowable precision of the enforcement regulations of Cadastral Law. Therefore, it is judged that the traditionally used Total Station method should be used for supplementary survey on Block II, in stead.

• 건축역사연구
• /
• 제11권1호
• /
• pp.49-64
• /
• 2002

The recently published papers and essays regarding 'tectonic' bring us to rumination of its importance on comprehending modern architectural process. Many architectural theorists may seem to seek the substance of architecture through the discussion of 'tectonic' for the purpose of overcoming the dilemma of representation which can be easily found in modern architectural forms. Their emphasizing on its double-faced aspect as the manner of representation, that is semantic and aesthetic, may imply the significance of philosophical approach especially to the recent architectural phenomena. From this point, it ought to be meaningful to manifest etymological connection between the terms with semantic analysis and interpret the substance and ontological meaning of 'tectonic' referring Martin Heidegger's existential philosophy. Besides the works of Carlo Scarpa, that are known as the art of making, are exampled to prove the way how the ontological meaning of practical act is exposed on an artwork. The idea of 'tectonic' connotes not only technological aspect as construction of form and space, but also ontological aspect as joint or detail, that is the result of logos. The 'tectonic' means etymologically 'joint' having double-meaning structure, technology and aesthetics. It means 'detail' as minimum units of architectural form and as sites where making relationship or connection takes place in the way of ontological apprehension. The 'detail' as the place of innovation and invention implies the culture of an area, and expresses craftsmanship, which modem architecture buries in oblivion. This study aims to deviate from the aesthetical commercialization in which the modern architecture tends to fall, and further, propose the possible way to succeed traditional locality in an epistemological point of view.

• 한국정보통신학회논문지
• /
• 제26권12호
• /
• pp.1809-1815
• /
• 2022

디지털 트윈이란 현실세계와 동일한 가상세계를 만드는 기술이다. 다양한 시물레이션을 통해 현실 세계의 문제를 파악할 수 있어 여러 산업 분야에서 적용하는 추세이다. 디지털 트윈을 적용하기 위해서는 동일하게 만드려는 현실세계의 구조가 설계된 도면을 분석해야 한다. 도면을 분석하는 기술이 연구되고 있지만 도면을 작성하는 규칙이나 기준이 작성자마다 다르기 때문에 적용하기 어려운 추세다. 따라서 본 논문에서는 인공지능을 이용하여 도면 중 하나인 격점상세도를 분석하여 분류하는 시스템을 구현한다. 이를 통해 인공지능을 이용하여 도면을 분석하고 분류할 수 있는 가능성을 확인하고 추후 연구 방향에 대해 소개하고자 한다.

• 품질경영학회지
• /
• 제41권2호
• /
• pp.209-220
• /
• 2013

Purpose: This paper compares and discusses the influence on the quality classification of Kano's questionnaire which is used for the Kano model(Kano et al., 1984), the 3-point Likert-scale newly proposed by Kano and the 5-point Likert-scale presented in this study. Methods: For the comparison, the current study conducts a survey of 631 television viewers. The classification results of the three methods are then compared with those of direct classification which is adopted as a standard for classification of quality attributes. Results: The agreement rates between the results using conventional Kano's questionnaire and the results using direct classification is higher than the results using 3-point and 5-point Likert-scales. In addition, the attributes grouped as must-be or attractive in the direct classification appear to be classified as one-dimensional attributes in the Likert-scales. Conclusion: In comparison with the convensional Kano's questionnaire, the Likert-scale questions highly tend to classify the quatity attributes as one-dimensional. Although the classification results of the 3-point and 5-point Likert-scales are the same, the 5-point Likert-scale has the advantage to classify quality attributes in more detail.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.61-67
• /
• 2015

The concept of horizontal shear connection utilization on wood-concrete beams intends to be an alternative connection detail for composite wood-concrete decks. The volume of sawn-wood is over three times more expensive than concrete, in Brazil. In order to be competitive in the Brazilian market we need a composite deck with the least amount of wood and a simple and inexpensive connection detail. This research project uses medium to high density tropical hardwoods managed from the Brazilian Amazon region and construction steel rods. The beams studied are composed of a bottom layer of staggered wood boards and a top layer of concrete. The wood members are laterally nailed together to form a wide beam, and horizontal rebar connectors are installed before the concrete layer is applied on top. Two sets of wood-concrete layered beams with horizontal rebar connectors (6 and 8) were tested in third-point loading flexural bending. The initial results reveal medium composite efficiency for the beams tested. An improvement on the previously conceived connection detail (set with six connectors) for the composite wood-concrete structural floor system was achieved by the set with eight connectors. The new layout of the horizontal rebar connectors added higher composite efficiency for the beams tested. Further analysis with advanced rigorous numerical Finite Element Modeling is suggested to optimize the connection parameters. Composite wood-concrete decks can attend a large demand for pedestrian bridges, as well as residential and commercial slabs in the Brazilian Amazon.

• 항공우주기술
• /
• 제8권2호
• /
• pp.26-32
• /
• 2009

위성영상의 융합에 있어, 가장 중요한 점은 전정영상의 공간적 세밀함과 다중분광영상의 분광정보 모두를 보존하는 것이다. 다양한 영상융합 기법 중에서, IHS 변환을 이용한 융합기법은 폭넓게 사용되고 있으며, 계산과정이 매우 단순하다는 장점을 갖고 있다. 본 연구에서는, fast IHS 변환과 trade-off 파라미터 $\alpha^i$를 이용한 융합기법을 제안한다. 제안한 융합 기법은 분광 ERGAS와 공간 ERGAS의 평가를 통하여, 융합영상에서 분광정보와 공간적 세밀함 사이의 trade-off 최적화를 가능하게 한다. IKONOS 영상의 실험결과, 제안한 기법은 기존의 fast IHS 변환을 이용한 융합기법에 비해 공간적 세밀함과 분광정보의 보존측면에서 더 효과적임을 확인할 수 있었다.

• 한국BIM학회 논문집
• /
• 제7권4호
• /
• pp.8-20
• /
• 2017

When it comes to set up the BIM through the reverse engineering, the level of detail(LoD) required for finalized outcomes is different from each purpose. Therefore, it is necessary to establish some concrete criteria which describe the definition of LoDs on 3D modeling for the purpose of each reverse engineering. This research shows the criteria of the 1) positional accuracy, 2) generalization level, 3) scale level, 4) scope of description, and 5) the area available for application by classifying LoD from 1 to 6 on 3D modeling for each purpose of reverse engineering. Moreover, through applying those criteria for the 3D point cloud dataset of building made by terrestrial LiDAR, this research finds out the working hour of 3D modeling of reverse engineering by each LoDs according to defined LoD criteria for each level. It is expected that those findings, how those criteria of LoD on reverse engineering are utilized for modeling-workers to decide whether the outcomes can be suitable for their budget, applicable fields or not, would contribute to help them as a basic information.

• Structural Engineering and Mechanics
• /
• 제54권3호
• /
• pp.433-451
• /
• 2015

This paper focuses on large deflection static behavior of edge cracked simple supported beams subjected to a non-follower transversal point load at the midpoint of the beam by using the total Lagrangian Timoshenko beam element approximation. The cross section of the beam is circular. The cracked beam is modeled as an assembly of two sub-beams connected through a massless elastic rotational spring. It is known that large deflection problems are geometrically nonlinear problems. The considered highly nonlinear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. There is no restriction on the magnitudes of deflections and rotations in contradistinction to von-Karman strain displacement relations of the beam. The beams considered in numerical examples are made of Aluminum. In the study, the effects of the location of crack and the depth of the crack on the non-linear static response of the beam are investigated in detail. The relationships between deflections, end rotational angles, end constraint forces, deflection configuration, Cauchy stresses of the edge-cracked beams and load rising are illustrated in detail in nonlinear case. Also, the difference between the geometrically linear and nonlinear analysis of edge-cracked beam is investigated in detail.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.519-530
• /
• 2014

A novel simplified pulse width modulation(PWM) strategy for neutral point clamped (NPC) three-level converter is proposed in this paper.The direct output voltage modulation is applied to reduce the calculation time. Based on this strategy, several optimized control methods are proposed. The neutral point potential balancing algorithm is discussed and a fine neutral point potential balancing scheme is introduced. Moreover, the minimum pulse width compensation and switching losses reduction can be easily achieved using this modulation strategy. This strategy also gains good results even with the unequal DC link capacitor. The modulation principle is studied in detail and the validity of this simplified PWM strategy is experimentally verified in this paper. The experiment results indicated that the proposed PWM strategy has excellent performance, and the neutral point potential can be balanced well with unequal DC link captaincies.