• Korean Journal of Materials Research
• /
• v.18 no.12
• /
• pp.664-668
• /
• 2008

Vapor phase polymerization of a conductive polymer on a $SiO_2$ surface can offer an easy and convenient means to depositing pure and conductive polymer thin films. However, the vapor phase deposition is generally associated with very poor adhesion as well as difficulty when patterning the polymer thin film onto an oxide dielectric substrate. For a significant improvement of the patternability and adhesion of Poly(3-hexylthiophene) (P3HT) thin film to a $SiO_2$ surface, the substrate was pre-patterned with n-octadecyltrichlorosilane (OTS) molecules using a ${\mu}$-contact printing method. The negative patterns were then backfilled with each of three amino-functionalized silane self-assembled monolayers (SAMs) of (3-aminopropyl) trimethoxysilane (APS), N-(2-aminoethyl)-aminopropyltrimethoxysilane (EDA), and (3- trimethoxysilylpropyl)diethylenetriamine (DET). The quality and electrical properties of the patterned P3HT thin films were investigated with optical and atomic force microscopy and a four-point probe. The results exhibited excellent selective deposition and significantly improved adhesion of P3HT films to a $SiO_2$ surface. In addition, the conductivity of polymeric thin films was relatively high (${\sim}13.51\;S/cm$).

• Journal of Integrative Natural Science
• /
• v.4 no.2
• /
• pp.113-120
• /
• 2011

Brassinosteroids (BRs) are plant steroid hormones that play essential roles in growth and development. Mutations in BR-signaling pathways cause defective in growth and development like dwarfism, male sterility, abnormal vascular development and photomorphogenesis. Transition from vegetative to reproductive growth is a critical phase change in the development of a flowering plant. In a screen of activation-tagged Arabidopsis, we identified a mutant named abz126 that displayed longer hypocotyls when grown in the dark on MS media containing brassinazole (Brz), an inhibitor of BRs biosynthesis. We have cloned the mutant locus using adapter ligation PCR walking and identified that a single T-DNA had been integrated into the ninth exon of the GIGANTEA (GI) gene, involved in controling flowering time. This insertion resulted in loss-of-function of the GI gene and caused the following phenotypes: long petioles, tall plant height, many rosette leaves and late flowering. RT-PCR assays on abz126 mutant showed that the T-DNA insertion in GIGANTEA led to the loss of mRNA expression of the GI gene. In the hormone dose response assay, abz126 mutant showed: 1) an insensitivity to paclobutrazole (PAC), 2) an altered response with 6-benzylaminopurine (BAP) and 3) insensitive to Brassinolide (BL). Based on these results, we propose that the late flowering and tall phenotypes displayed by the abz126 mutant are caused by a loss-of-function of the GI gene associated with brassinosteroid hormone signaling.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.13 no.2
• /
• pp.34-44
• /
• 2009

Background : Currently, as a method of standardization of prescription, questionnaire for Buzhongyiqi-Tang[補中益氣湯] was developed, and which is a Objectives : The purpose of this thesis is to testify whether differentiation of Lao Juan Shang[勞倦傷] etiology is relative to mobility of gastric smooth muscle. Methods : The subjects(20 to 65 years old; 14 males, 46 females) were isolated from drinking alcohols for 24 hours before the experiment, and fasted for 8 hours, and measured for electrogastrography(EGG) and they filled out Questionnaire for Buzhongyiqi-Tang. Results : 1. Six factors from the factor analysis of Questionnaire for Buzhongyiqi -Tang were named and classified as Spleen-Qi deficiency syndrome factor [脾虛] (factor 1), Lung-Qi deficiency syndrome factor [肺虛] (factor 2), Working factor [習慣] (factor 3), Yin-Fire factor [陰火] (factor 4), Jung-Qi deficiency syndrome factor [中氣虛] (factor 5), and Stomach-Qi deficiency syndrome factor [胃虛] (factor 6). 2. As for the reliability of Questionnaire for Buzhongyiqi-Tang, we used Cronbach's alpha coefficient. Cronbach's alpha coefficient was 0.772 for the mean of the item-total. 3. Lung-Qi deficiency syndrome factor(factor2) had significant correlation with Bradygastria Time (r=-0.312, p<0.05). 4. Working factor(factor3) had significant correlation with Bradygastria Time (r=-0.329, p<0.05). 5. Yin-Fire factor(factor4) had significant correlation with Power Ratio (r=-0.328, p<0.05). Conclusions : It is shown that Bradygastria Time and Power Ratio tended to decrease against postprandial DP increased and postprandial frequency decreased in normal case.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.18 no.1
• /
• pp.39-46
• /
• 1982

The author has developed the computer program in order to calculate the optimum alignment condition of marine propulsion shafting by linear programming method. The input of program was calculated by the matrix method of three-moment. He compared the calculated values with the experimental values measured by the strain gage on the model shaft, and the values of calculation on actual propulsion shafting with those of Det norske Veritas. The computer program of optimum alignment has been applied to the actual shaft. The results obtained are as follows: 1. To obtain the reaction of supporting points in the straight line necessary to the optimum alignment and the reaction influence number, after the computer program had been developed and then adapted, the result of experimental values and calculated values agreed with each other and the values of the actual shaft were also approximately similar to the values of other program. 2. In this paper, the measuring method on model shaft by strain gage can be effectively used at the time of adjusting alignment condition of actual shaft. 3. The supporting bearing should be considerably readjusted to the vertical direction in order to satisfy some limited condition.

• Applied Biological Chemistry
• /
• v.8
• /
• pp.39-43
• /
• 1967

In the fermented mash of Takju made from different raw-materials the general components are det. ermined by chemical analysis and the organic acids, sugars are identified by paper chromatography method. The results are summarized as follows. 1. Alcohol content is the highest in the fermented mash made from starch. 2. Contents of organic acid in the fermented mash from rice are more than those in other raw materials including lactic acetic, succinic, fumaric, malic and The citric acid flavour of Takju mainly depends on the components of organic acids. 3. glucose, sucrose, fructose, maltose, raffinose, xylose are identified in the raw-materials and glucose, sucrose, fructose, xylose are found in the fermented mash. 4. In order to get good-flavour in the starch-fermented mash and flour-fermented mash as well as rice-fermented mash, there should be contented organis as much as rice-fermented mash.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.151-156
• /
• 1985

In this paper, the plane stress fracture toughness of cold rolled 4.5mm thick SS41 steel plate was investigated for various crack ratios respectively in case of base metal, normalized and annealed heat-treated specimens using the method of J-integral. The specimen geometry used was double edge tension (DET) specimen. The experiments were performed on an Instron machine and all the crack lengths were measured by travelling microscope. The plane stress fracture toughness obtained by the method of Rice equation was J sub(1C)=22.8kgf/mm for the base metal, j sub(1C)-24.7kgf/mm for the normalized specimen and J sub(1C)=26.9 kgf/mm for the annealed. The J-integral computed at the limit load was found unsuitable for fracture toughness determination, because of large variation depending on the crack ratio.

• Journal of the Korean Institute of Gas
• /
• v.15 no.2
• /
• pp.69-74
• /
• 2011

As a way to propose a method for the establishment of practical damage-minimizing plan for chemical plants, the release scenario was established by using API-581 BRD and the effect zone was estimated by the KS-RBI program supporting the quantitative cause analysis. And the risk assessment was performed. As a result, we found that to minimize the damage of a chemical plant, it is effective to use four release hole diameters (small, medium, large and rupture) and release time estimated according to the classes of detection and isolation systems. In addition, it can be safely said that through appling the damage areas considering weighted average by failure frequency and worst-case simultaneously, industrial sites can come up with the effective emergency response plan.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.152-155
• /
• 2009

Purpose: The most widely accepted tool for follow up management of thyroid cancer patients is serum thyroglobulin (Tg) measurement, but its value is limited by the interference of anti-thyroglobulin antibodies (anti-Tg Ab). Recently thyroglobulin measurement in the wash out of fine-needle aspiration biopsy specimens (Tg-FNAB) is frequently used for differential diagnosis of recurrences/metastases. The aim of this study was the investigation of the diagnostic utility of Tg-FNAB compared with serum Tg. Materials and Methods: We enrolled 41 consecutive patients with thyroid cancer who were evaluated for Tg-FNAB between January 2007 and February 2008 retrospectively. We ruled out 6 patients who anti-Tg Ab positive (${\geq}$100 U/mL) in the RIA (BRAHMS anti-Tgn RIA 100Det; BRAHMS Aktiengesell schaft, Berlin, Germany). Serum Tg and Tg-FNAB were measured by immunoradiometric assay (BRAHMS Tg pluS RIA 100 Det; BRAHMS Aktienge sellschaft, Berlin, Germany). We evaluated for Tg-FNAB compared with serum Tg and corresponding cytological smear. To compare the values of the two the t-test was used. Results: Tg-FNAB values were significantly higher (median 1,060 ng/mL, range 0.2~434,000 ng/mL) than serum Tg (median 2.5 ng/mL, range 0.9~131 ng/mL) (p=0.0394). The rate of correspondence with Tg-FNAB between cytological result was 87.9% and 65.9% in the case of serum Tg. Tg-FNAB was positive in 28 (24 with positive and 4 with suspicious cytology). Of the remaining 13 patients with negative Tg-FNAB, 1 had suspicious and 12 had unsuspicious cytology. serum Tg was positive in 26 (17 with positive and 3 with suspicious and 6 with unsuspicious cytology), Of the remaining 15 patients with negative serum Tg, 8 was positive in cytological result and 1 had suspicious and 6 had unsuspicious cytology. Conclusions: Tg-FNAB measurement is more accurate with high sensitivity (87.9%) than serum Tg (65.9%). The Tg-FNAB was a useful predictor for detecting recurrences/metastases with serum Tg.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.185-190
• /
• 2016

Damages of the main engine aftmost bearing and the after stern tube bearing tend to increase due to misalignment. And as the shafting system becomes stiffer due to the large engine power, whereas the hull structure becomes more flexible due to optimization by using high tensile thin steel plates. And this is the reason that more sophisticated shaft alignments are required. In this study, the optimum shafting alignment calculation was carried out, considering the thermal expansion effect, exploiting the sensitivity index, which indicates the reasonable position of forward intermediate shaft bearing for shaft alignment. and as the main subject in this study, the elastic deformation on intermediate shaft and main engine bearings occurred by vertical load of shaft mass were examined thoroughly and analyzed allowable load of bearings, reaction influence numbers of all bearings. As the result, a reliable optimum shafting alignment was derived theoretically. To verify these results, they were referred to the engine maker's technical information of main engine installation and being used shafting alignment programs of both Korean Register of Shipping and Det Norske Veritas, their reliability were reviewed.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.176-184
• /
• 2010

The power simulator for a LEO satellite is a useful tool to analyze mission validity and energy balance for various mission scenarios by estimating power generation, power consumption, depth of discharge, bus voltage, charging/discharging current, etc. In this paper, it is described the calculation algorithm of the solar array (SA) power, the satellite load power and the battery modeling method to develop a satellite power simulation. To simulate the SA power generation, three different operation modes (DET, MPPT, CV) of SAR (Solar Array Regulator) are considered with a SA model. The satellite load power is estimated using the satellite unit power database, the unit on/off configuration at some satellite operation modes. The bus voltage and battery charging/discharging current at the specific DoD (Depth of Discharge) are calculated based on the battery characteristics. By this satellite power simulator, it can be conveniently analyzed the energy balance and the validity of a planned mission of a LEO satellite.