• Environmental and Resource Economics Review
• /
• v.22 no.2
• /
• pp.329-365
• /
• 2013

The purpose of this paper is to measure economy and environment efficiencies under fossil fuel and environment regulation by countries for 2000-2009. Distinguishing 83 countries with three groups of OECD, upper-middle, and low countries, we compare four models such as environment oriented, economy-oriented, environment-economy oriented, and two-stage types, which include a desirable output, GDP and an undesirable output, pollutant together in the production possibility set. OECD countries relatively showed high economy efficiency and low environment efficiency, whereas Non-OECD countries showed high environment efficiency and low economy efficiency. OECD countries reported a higher possibility to reduce fossil fuel and $CO_2$ emission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.607-613
• /
• 2004

The future wireless communication systems will use spatial multiplexing with Multiple Input Multiple Output(MIMO) system to take advantage of high spectral efficiencies. In such systems it will be desirable to select a sub-set of available transmit or receive antennas to reduce cost and complexity. In this paper we propose a novel transmit antenna selection schemes for MIMO systems which is suitable for multipath environment. The proposed transmit antenna selection schemes offer better BER performance than that of MIMO systems without antenna selection and with traditionally proposed antenna selection schemes.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.143-153
• /
• 1997

At the on-line control method FLC(Fuzzy Logic Controller) is stronger to the disturbance than a classical controller and its overshoot of the initialized value is excellent. The fuzzy controller can do a proper control, though it doesn't know the mathematical model of the system or the parameter value. But to make the control rule of the fuzzy controller through an expert's experiance has a changes of the control system, the control rule is fixed, it can't adjust to the environment changes of the control system, the controller output value has a minute error and it can't convergence correctly to the desired value[1][2]. There are many ways to eliminate the minute error[3][4][5], but in this paper suggests EP-FNNIC(Fuzzy Neurla Network Intelligence Controller) intelligence controller which combines FLC with NN(Neural Network) and EP(Evolution Programming). The output characteristics of EP-FNNIC controller will be compared and analyzed with FLC. It will be showed that this EP-FN IC controller converge correctly to the desirable value without any error. The convergence speed, overshoot, rising time, error of steady state of controller of these two kinds also will be compared.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.165-168
• /
• 2002

As the demand for higher data-rate chip-to-chip communication such as memory-to-controller, processor-to-processor increases, low cost high-speed serial links\ulcorner become more attractive. This paper describes a 0.25-fm CMOS 1.6Gbps/pin 4-level transceiver using Stub Series Terminated Logic for high Bandwidth. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by channel low pass effects, process-limited on-chip clock frequency, and serial link distance. The proposed transceiver uses multi-level signaling (4-level Pulse Amplitude Modulation) using push-pull type, double data rate and flash sampling. To reduce Process-Voltage-Temperature Variation and ISI including data dependency skew, the proposed high-speed calibration circuits with voltage swing controller, data linearity controller and slew rate controller maintains desirable output waveform and makes less sensitive output. In order to detect successfully the transmitted 1.6Gbps/pin 4-level data, the receiver is designed as simultaneous type with a kick - back noise-isolated reference voltage line structure and a 3-stage Gate-Isolated sense amplifier. The transceiver, which was fabricated using a 0.25 fm CMOS process, performs data rate of 1.6 ~ 2.0 Gbps/pin with a 400MHB internal clock, Stub Series Terminated Logic ever in 2.25 ~ 2.75V supply voltage. and occupied 500 * 6001m of area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1021-1024
• /
• 2001

Out of all metal-cutting processes, the hole-making process is the most widely used. It is estimated to be more than 30% of the total metal-cutting process. It is therefore desirable to monitor and detect drill wear during the hole-drilling process. In this paper, the vision system of the sensing methods of drill flank wear on the basis of image processing is used to detect the wear pattern by non-contact and direct method and get the reliable wear information about drill. In image processing of acquired image, median filter is applied for noise removal. The vision flank wear area of the drill was measured. Backpropagation neural networks (BPns) were used for no-line detection of drill wear. The neural network consisted of three layers: input, hidden and output. The input vectors comprised of spindle rotational speed, feed rates, vision flank wear, thrust and torque signals. The output was the drill wear state which was either usable or failure. Drilling experiments with various spindle rotational speed and feed rates were carried out. The learning process was peformed effectively by utilizing backpropagation. The detection of the abnormal states using BPNs achieved 96.4% reliability even when the spindle rotational speed and feedrate were changed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.2998-3017
• /
• 2018

Massive (large-scale) MIMO (multiple-input multiple-output) is one of the key technologies in next-generation wireless communication systems. This paper proposes a high-performance low-complexity turbo receiver for SC-FDMA (single-carrier frequency-division multiple access) based MMIMO (massive MIMO) systems. Because SC-FDMA technology has the desirable characteristics of OFDMA (orthogonal frequency division multiple access) and the low PAPR (peak-to-average power ratio) of SC transmission schemes, the 3GPP LTE (long-term evolution) has adopted it as the uplink transmission to meet the demand high data rate and low error rate performance. The complexity of computing will be increased greatly in base station with massive MIMO (MMIMO) system. In this paper, a low-complexity adaptive turbo equalization receiver based on normalized minimal symbol-error-rate for MMIMO SC-FDMA system is proposed. The proposed receiver is with low complexity than that of the conventional turbo MMSE (minimum mean square error) equalizer and is also with better bit error rate (BER) performance than that of the conventional adaptive turbo MMSE equalizer. Simulation results confirm the effectiveness of the proposed scheme.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.117-127
• /
• 2007

Many real world control systems usually track several control objectives, simultaneously. At the moment, it is desirable to meet all specified goals using the controllers with simple structures like as proportional-integral (PI) and proportional-integral-derivative (PID) which are very useful in industry applications. Since in practice, these controllers are commonly tuned based on classical or trial-and-error approaches, they are incapable of obtaining good dynamical performance to capture all design objectives and specifications. This paper addresses a new method to bridge the gap between the power of optimal multiobjective control and PI/PID industrial controls. First the PI/PID control problem is reduced to a static output feedback control synthesis through the mixed $H_2/H_{\infty}$ control technique, and then the control parameters are easily carried out using an iterative linear matrix inequalities (ILMI) algorithm. Numerical examples on load-frequency control (LFC) and power system stabilizer (PSS) designs are given to illustrate the proposed methodology. The results are compared with genetic algorithm (GA) based multiobjective control and LMI based full order mixed $H_2/H_{\infty}$ control designs.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2076-2082
• /
• 2011

The goal of this paper is to find an operating conditions of the single direct ethanol fuel cell such as the cell temperature, and flow rates of ethanol and oxygen. To investigate the output characteristics, the electrical current increased from 0[A] with interval of 0.001[A] every 2[s], and the cell voltage was increased until the voltage became 0.05[V]. Related to the effect of the cell temperature, the output characteristics both voltage and power were increased upto 80[$^{\circ}C$] according to the increase of the current density, but those were decreased over that temperature. In addition, the optimal flow rate of ethanol in anode was identified as of 2[mL/min] due to the dependence of generation rate such as the hydrogen ion and electron. And the flow rate of oxygen in cathode was desirable to about 300[sccm/min], it might be affected by the chemical reaction rate of the water formation among hydrogen ion, electron, and oxygen. Consequently, the fundamental conditions were identified in this work, and it will be carried out to find the best conditions of membrane by the effect of the plasma surface treatment, and the effect of other catalysts except for a platinum.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.869-881
• /
• 2023

A genetic improvement program in Korea was implemented to improve the performance of Hanwoo cattle by generating livestock with genetically desirable economic characteristics. In particular, in response to external changes, such as the expansion of Free Trade Agreement (FTA), the livestock genetic improvement program has increased farm income by improving the productivity and quality of Hanwoo cattle. Using production cost data from Statistics Korea, the total input and output indices of Hanwoo feeding cattle from 2008 - 2021 were estimated and the growth and productivity changes were analyzed. The productivity change measures results were used to estimate the cumulative effects of the Hanwoo genetic improvement program on quality improvement, another purpose of the program, using a finite distributed lag model. The average annual increase in output (market weight) of Hanwoo was 0.9%. However, total input increased by 1.6%, resulting in a 0.6% decline in total factor productivity. In contrast, the Hanwoo genetic improvement program contributed significantly to the production of high quality beef, rather than contributing to improved productivity of the cattle. Hanwoo carcass weight, which is used as a performance indicator for the livestock genetic improvement program, has significantly improved and is projected to increase at a slower rate. The collective findings indicate the need for new performance indicators that can comprehensively indicate the performance of the genetic improvement of Hanwoo.

• Korea Journal of Hospital Management
• /
• v.13 no.3
• /
• pp.69-93
• /
• 2008

Rising healthcare cost is a global phenomenon that justifies governments' introduction of 'incentive regulation' plan for the improvement of hospital efficiency. A number of previous studies tried to evaluate the efficiency of healthcare organization by using Data Envelopment Analysis(DEA), a common efficiency benchmarking method. However, there is a concern that this kind of efficiency evaluation could induce "quantity-quality trade-off". Moreover, as quality aspect is especially important in terms of 'effectiveness' of health care, it should be considered in efficiency evaluation of healthcare organization. A number of different models were tried so far to incorporate quality aspect into DEA, however, none is universally recognized as a standard. Thus, in this study, previous quality-incorporating DEA models were categorized into 6 types according to the way of incorporating quality aspect, and strengths and limitations of each type were reviewed with a set of artificial data as an example. Based on this review, a new quality-incorporating efficiency evaluation model, named Quality-adjusted output DEA(QAO-DEA), was suggested. As an exploratory empirical analysis, technical efficiency of human resource were measured with different quality-incorporating DEA models, using 2004 data from National University Hospitals. In conclusion, Quality-adjusted output DEA(QAO-DEA) model seems to be one of the most desirable alternatives to incorporate quality aspect in efficiency evaluation of hospital, and deserves the consideration as a policy tool to induce simultaneous improvement of both efficiency and quality.